固定节点3D网格部署的水下传感器网络分簇路由算法

水下传感器网络是应用于水下通信的重要传感器网络技术。提出了基于固定节点3D网格部署的水下无线传感器网络分簇算法,设计了3D网格的编址和分簇方法,实现了基于地址分配的节点定位,构建了算法的能耗分析模型。采用MATLAB完成了算法的性能仿真,对比了DS-VBF、IAR和GEDAR 3个算法的平均数据传输延迟和网络生存时间(TTL)。实验结果表明,此算法的平均数据传输延迟较短,可明显提高UWSNS的生存时间。     

一种定标缺失情况下的高光谱目标识别方法

高光谱遥感图像识别在民用和军事领域有着广泛的应用。在缺乏定标信息、缺乏同步观测大气光学参数情况下,对高光谱图像进行地物识别尚没有系统有效的方法,制约了其在定量遥感方向的应用。对此提出了一种利用粒子群算法优化6S模型参数基础上的高光谱遥感数据校正方法,并将其应用于定标缺失情况下的目标识别中。实验表明:在对遥感图像利用少许先验信息选择参数进行校正后,分类准确率为76.25%。而利用粒子群算法优化参数的6S校正后,分类准确率提高到91.58%,目标识别准确率得到了有效提高。     

Bringing Military Conduct out of the Shadow of Law: Towards a Holistic Understanding of Rules of Engagement

In this article, I outline a holistic approach to the military concept of “Rules of Engagement” (ROE), which complements the legal aspects of ROE with considerations of operational and political requirements for the use of military force. Drawing upon two illustrative cases from the US military experience with the use of ROE, I demonstrate that ROE for any particular military operation should be formulated to balance optimally, if not harmonize fully, the legal, operational and political concerns related to the use of force. In this task, political decision-makers and military practitioners alike are confronted with unavoidable and real-life dilemmas. How these dilemmas are handled has significant implications for how legal requirements concerning accountability and concerns for civilian lives in military combat can be preserved through ROE.     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

一种RetinaNet与SE融合的航空取证目标检测算法

针对在开展航空侦察取证时缺乏自动化、智能化取证手段的情况,提出了一种基于Reti-naNet与SE融合的航空取证目标检测算法,解决目标尺度变化大、数据集中类别不均衡的问题,并通过SE (squeeze-excitations)模块引入注意力机制进一步改进性能.该改进算法中的特征金字塔网络FPN可有效应对目标尺寸变化较大...     

Damage behavior of the KKV direct hit against fluid-filled submunition payload

The damage effects of fluid-filled submunition payload impacted by the kinetic kill vehicle (KKV) are investigated by simulations and ground-based experiments. Numerical simulations showed that the damage level and number of submunitions were significantly influenced by the diameter of the KKV compared with its length. Based on that, a high velocity penetrator formed by shaped charge explosion was used to simulate the direct hit experiment of a KKV impacting submunition payload. Experimental results demonstrated that the damage modes of submunitions mainly included the slight damage, perforation and total smash, showing a good agreement with the simulations. To understand the multiple damage modes of submunitions, the damage behavior of the submunitions in direct hit process were analyzed based on the AUTODYN-3D code. Numerical results presented that increased KKV diameter can increase the crater diameter and expand the damage volume, which will achieve a higher direct hit lethality. Further analysis indicated that there were other mechanical behaviors can enhance the damage to submunitions not lying in the KKV flight path, such as secondary debris kill, neighboring submunitions collision with each other, and high-speed fluid injection effect.     

基于EMP环境下的导弹作战防护对策分析

EMP武器以其极强的破坏性在现代战争中展现出了显著的作战效能。为了提高EMP环境下导弹作战防护能力,简单分析了EMP的产生过程,阐述了EMP武器在作战运用中的干扰、软(硬)杀伤的作用机理,研究了EMP环境对导弹及测试设备、指挥系统、计算机系统的影响,提出了导弹作战中对EMP的防护应采取设置法拉第笼、可靠接地、滤波等防护对策。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

始终处于大气层内飞行的TBM被动段弹道预测

对大气层内飞行的TBM弹道进行预测时,需要根据不同的应用要求,在求解精度允许范围内用近似方法对六自由度运动进行简化,获得简便实用的弹道预测方法。在假设获得TBM被动段弹道初始位置和速度参数的基础上,首先构建简便实用的处于大气层内飞行的TBM被动段抛物线弹道模型;然后将雷达测得的TBM被动段弹道初始位置和速度参数作为初始条件,对弹道方程采用精度较高的龙格-库塔法进行求解,相应得出被动段弹道上各点及落点的位置和速度参数,进一步确定出落点位置的地理位置经纬度。在某地空攻防对抗仿真项目中应用表明,弹道模型及其求解方法可应用于实战或较为逼真的仿真系统中。     

遗传算法在防空导弹火力优化分配中的应用

介绍了遗传算法的基本原理、算法设计并结合遗传算法主要解决了如何把目标分配给火力单元的问题,编写了相应的程序,并给出了一个基于遗传算法的火力优化分配方案。