基于PXI总线的虚拟校准设备研究

基于PXI总线技术,对某型导弹内场测试仪的校准设备进行了集成化、小型化研究,依靠计算机强大的计算储存显示等功能,实现了设备操作界面的虚拟化及智能化．最后,对在LabVIEW平台上开发的测量校准软件进行了实验验证,达到了界面友好、操作简单、测量精度高、工作效率高等要求．     

基于北斗、短波的高精度时钟系统研究与设计

介绍了北斗、短波授时技术;对高稳恒温晶振及其频率特性进行分析的基础上,设计了一种基于北斗卫星、短波无线电授时的高精度时钟系统;该系统通过利用北斗接收处理模块、短波授时接收模块得到的秒脉冲信号、时间信息,经过延迟修正处理、脉冲滤波、脉冲补偿、脉冲统计得到标准的秒脉冲信号,实现对恒温晶振频率的校准,获得一个短期及长期频率稳定度都比较优良的时间频率标准,同时利用校频后恒温晶振分频出的1pps信号对时间芯片进行校准,对外输出高精度时间信息;对恒温晶振校频系统的基本工作原理及部分模块电路图进行了说明,试验结果表明,在时间不长于1h内,频率准确度优于1×10-10;该系统实用方便的方法达到了将晶体振荡器校准到较高指标的目的。     

信息扩散模型的窗宽优化与鱼雷战术效能实验评估

针对海洋环境对鱼雷等武器装备战术效能影响的试验数据和案例样本匮乏等普遍性问题,引入信息扩和模糊映射思想,并基于遗传算法改进和发展了最优窗宽扩散模型。该方法可从有限的试验样本中客观拟合出数据结构信息,进而实现有限数据样本信息的合理扩散。利用该方法进行了基于小样本案例的潜射鱼雷战术效能的海洋环境影响评估的信息扩散建模和仿真实验和对比分析。结果表明,窗宽优化的信息扩散模型可有效改进常规信息扩散模型的评估效果,对武器装备环境影响评估中普遍存在的小样本或信息不完备困难有一定参考应用意义。     

基于逆向强化学习的舰载机甲板调度优化方案生成方法

针对计算机辅助指挥调度舰载机甲板作业的决策过程无法脱离人参与这一特点,引入基于逆向学习的强化学习方法,将指挥员或专家的演示作为学习对象,通过分析舰载机的甲板活动,建立舰载机甲板调度的马尔可夫决策模型(MDP)框架;经线性近似,采用逆向学习方法计算得到回报函数,从而能够通过强化学习方法得到智能优化策略,生成舰载机甲板调度方案。经仿真实验验证,本文所提方法能够较好地学习专家演示,结果符合调度方案优化需求,为形成辅助决策提供了基础。     

Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

含脉冲负载的综合电力系统储能优化配置研究

考虑到舰船环境限制和高能脉冲负载对储能的需求,有必要对储能装置进行合理的选型和优化配置,来提升综合电力系统性能。为此,基于带权极小模理想点法和层次分析法,提出了一种储能装置性能评价函数,并以其为优化目标,进行储能装置优化配置。所提出的评价函数充分考虑系统需求和脉冲负载特性,以储能装置体积、质量和经济性作为评价函数主要组成部分,同时考虑功率、能量、电压、荷电状态等约束,建立优化配置模型,并采用差分进化算法进行求解。以高性能锂电池和超级电容器为例,对所提模型进行求解计算,结果表明在所给权重系数下锂电池性能更优,更适用于综合电力系统,并给出了优化配置后的指导方案。     

弹道导弹被动段最优脉冲变轨方法

弹道导弹大气层外飞行时间长且弹道固定,易被敌方预测和拦截。针对以上问题,本文提出一种最优脉冲式变轨方法,该方法设计的弹道由2条不同的椭圆弧段组成,成功命中目标的同时,增加了敌方的拦截难度。以机动变轨所需能量和变轨后飞行剩余时间的加权最优为性能指标,设计了利用遗传算法在初始弹道上寻求最优变轨点的方法。最后,将遗传算法搜索最优点结果与遍历搜索结果进行对比,其最大误差为 ,从而验证了遗传算法在应用于导弹变轨问题,用以寻求最优变轨点是准确有效的。     

翼伞精确空投系统归航轨迹规划与控制

翼伞归航轨迹规划与控制问题是翼伞系统在一定初始状态下,利用自身可操作性,完成从初始位置到目标位置的转移问题。针对翼伞空投系统不同归航要求,规划出满足精度要求为圆径概率误差（ CEP ）小于40m的归航轨迹并经过一定量的控制完成翼伞空投系统精确空投任务。首先建立翼伞系统状态空间六自由度模型,并在此基础上提出系统简化稳态模型,通过最优控制方法,规划出满足空投要求的最优归航轨迹后对翼伞进行不断控制直至目标点。最后通过Matlab仿真试验,绘出翼伞系统归航轨迹图与控制变化图。     

舰炮对岸应召射击最优火力分配

针对舰炮射击特点,分析了海上射击误差,探讨了集群目标的简化处理方法,给出了最优火力分配时表尺差和弹药消耗量计算模型,并进行了举例分析。利用最优火力分配方法来计算舰炮效力射表尺差和弹药消耗量,避免了指挥员战场射击指挥的盲目性,可以在相同弹药消耗量情况下取得最佳射击效果。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003