Monitoring poisson count data with probability control limits when sample sizes are time varying

This article considers the problem of monitoring Poisson count data when sample sizes are time varying without assuming a priori knowledge of sample sizes. Traditional control charts, whose control limits are often determined before the control charts are activated, are constructed based on perfect knowledge of sample sizes. In practice, however, future sample sizes are often unknown. Making an inappropriate assumption of the distribution function could lead to unexpected performance of the control charts, for example, excessive false alarms in the early runs of the control charts, which would in turn hurt an operator's confidence in valid alarms. To overcome this problem, we propose the use of probability control limits, which are determined based on the realization of sample sizes online. The conditional probability that the charting statistic exceeds the control limit at present given that there has not been a single alarm before can be guaranteed to meet a specified false alarm rate. Simulation studies show that our proposed control chart is able to deliver satisfactory run length performance for any time‐varying sample sizes. The idea presented in this article can be applied to any effective control charts such as the exponentially weighted moving average or cumulative sum chart. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 625–636, 2013     

Effect of wire tension on different output responses during wire electric discharge machining on AISI 304 stainless steel

WEDM is used in machining conductive materials where it is required to obtained complicated and intricate shapes with high accuracy. Various applications are in the field of automobile, medical industries, aerospace etc. WEDM is an economical machining option with short product development cycle. Surface roughness, kerf width, Material removal rate, Recast layer hardness and surface microhardness in WEDM are most important responses. In this paper, effect of varied Wire tension on SR, KW, MRR, RCL hardness and surface microhardness on AISI 304 have been investigated. Pulse on time, pulse off time, current and dielectric fluid are taken as fixed parameter. Results show that Wire tension influences the SR, MRR and Surface microhardness and has no effect on kerf width in case of Stainless steel 304.     

多指标约束下某变质量热力系统的性能可靠性分析

针对某变质量热力系统的性能可靠性受多指标综合影响的问题,使用了一种基于 Monte Carlo 仿真的系统性能可靠性分析方法对该系统进行了可靠性分析。首先,选取系统的性能失效特征量作为载荷末速度和最大加速度,并确定了其失效标准;然后,阐述了系统中部件———调节阀开度的退化规律。在此基础上,对系统的性能可靠性进行了仿真分析,得到了系统性能失效特征量的故障概率密度及性能可靠度。仿真结果表明：随着部件性能参数的退化,系统性能可靠性逐渐降低。     

光纤陀螺惯性导航算法及其仿真

针对角速率和比力输入时的惯性导航算法进行了深入的研究。对高动态环境下的不同的姿态更新算法进行了对比研究,提出了一种新的速度和位置更新中的转动补偿算法,它将低动态和高动态(划船效应和涡卷效应)转动效应合二为一进行修正。并对系统算法进行了计算机仿真研究,最后给出了仿真结果。     

CALCULATION OF BURNING RATE CHARACTERISTICS IN ACCELERATED FIELD FOR SOME ALUMINIZED SOLID PROPELLANTS

ＣＡＬＣＵＬＡＴＩＯＮＯＦＢＵＲＮＩＮＧＲＡＴＥＣＨＡＲＡＣＴＥＲＩＳＴＩＣＳＩＮＡＣＣＥＬＥＲＡＴＥＤＦＩＥＬＤＦＯＲＳＯＭＥＡＬＵＭＩＮＩＺＥＤＳＯＬＩＤＰＲＯＰＥＬＬＡＮＴＳＣａｏＴａｉｙｕｅ（ＤｅｐａｒｔｍｅｎｔｏｆＡｅｒｏｓｐａｃｅＴｅｃｈ...     

JTIDS数据链在部分频带干扰下的性能分析

联合战术信息分发系统(Joint Tactical Information Distribution System,简称JTIDS)采用组合调制体制和多层编码体系保证报文传输的可靠性。分析了JTIDS数据链在莱斯衰落信道环境下的抗干扰性能,并通过仿真分析了该系统在部分频带干扰下的符号误码率和报文丢失率。仿真结果显示,由于JTIDS系统将RS编码、交织等多种编码技术和DS/FFH MSK调制技术相结合,使其在复杂信道环境下保持较低的符号误码率及报文丢失率,满足数据链报文传输可靠性的要求。     

未来空域窗体制下的高炮抗击反辐射导弹模型研究

针对高炮近程防空反导中存在的问题,以未来空域窗射击理论为基础,提出了高炮抗击反辐射导弹的单层未来空域窗指标论证模型,着重对弹幕的散布密度和武器系统的射速进行了研究。通过对模型的仿真计算,验证了模型的合理性,并对高炮抗击反辐射导弹的相关指标给出了建议。     

基于相位差变化率方法的单站无源定位技术

无源定位技术有着广阔的应用前景 ,文中在现有单站无源定位方法的基础上 ,介绍了相位差变化率定位法。该方法利用观测平台上两个相互正交的相位干涉仪接收目标辐射电磁波的相位差获取目标的方向信息 ,利用对应的相位差变化率获取目标的径向距离信息 ,从而实现对目标的实时高精度交叉定位。还给出了观测平台水平直线匀速飞行且无飞行姿态变化条件下的定位表达式。仿真结果表明 ,该方法是一种极具发展前途的单站无源定位方法     

线粘弹性材料中三维裂纹问题的加料有限元法

将加料有限元法扩展应用于线粘弹性材料三维断裂问题.为了反映裂纹尖端的奇异性,在裂尖附近的奇异区采用若干八节点六面体加料单元和过渡单元,非奇异区采用常规八节点六面体单元.三种单元分区混合使用形成求解域网格划分.基于Boltzmann叠加原理,推导了粘弹性材料的增量型本构关系,进而获得了增量加料有限元列式,并通过附加自由度计算粘弹性介质中裂纹应变能量释放率.数值算例验证了方法的正确性和有效性.     

高倍率脉冲放电锂电池的功率输出特性

由于电池内阻和极化现象的存在,锂电池在放电的瞬间会出现较大的电压跌落,高倍率脉冲放电锂电池更是如此。为了研究高倍率脉冲放电锂电池的功率输出特性,探讨温度、荷电状态和老化等因素对电池功率性能的影响规律,定义了锂电池的功率特性曲线,搭建了高倍率电池测试平台,并从温度、荷电状态和老化3个阻抗敏感因素开展实验研究。研究方法和结论对后期开展锂电池系统的峰值功率评估和功率曲线预测有一定的指导意义。