一种基于单频GPS接收机的自迭代定位算法

随着通用航空及无人机产业的发展,低成本及小型化的导航解决方案将具有广泛的市场。提出了一种基于单频GPS接收机的自迭代定位算法,用于提高定位精度,增强定位收敛性。对该算法的基本原理进行了分析,并推导出该算法的数学模型,通过静态实验的方法对该算法的收敛性进行验证,并将该算法的位置信息与最小二乘法解出的位置信息进行对比,体现了自迭代定位算法的优势。     

布拉格衍射型冷原子干涉重力仪关键实验条件研究

文章介绍了一种基于n阶布拉格衍射的新型冷原子干涉重力仪,可以进一步提高现有拉曼跃迁型原子干涉重力仪的测量灵敏度和稳定度。在介绍布拉格衍射型原子干涉重力仪基本原理的基础上,建立了原子平行驻波入射的时间型布拉格衍射冷原子干涉重力仪理论模型,分析了实验所需的关键条件,包括原子团纵向温度,布拉格激光直径、曲率半径、频率、强度以及时序等。与已有实验数据的对比结果表明,本文所建模型合理,所得结论能够为实际构造一台布拉格衍射型冷原子干涉重力仪提供有意义的指导。     

Stochastic framework for partially degradation systems with continuous component degradation‐rate‐interactions

Many conventional models that characterize the reliability of multicomponent systems are developed on the premise that for a given system, the failures of its components are independent. Although this facilitates mathematical tractability, it may constitute a significant departure from what really takes place. In many real‐world applications, system components exhibit various degrees of interdependencies, which present significant challenges in predicting degradation performance and the remaining lifetimes of the individual components as well as the system at large. We focus on modeling the performance of interdependent components of networked systems that exhibit interactive degradation processes. Specifically, we focus on how the performance level of one component affects the degradation rates of other dependent components. This is achieved by using stochastic models to characterize how degradation‐based sensor signals associated with the components evolve over time. We consider “Continuous‐Type” component interactions that occur continuously over time. This type of degradation interaction exists in many applications, in which interdependencies occur on a continuum. We use a system of stochastic differential equations to capture such “Continuous‐Type” interaction. In addition, we utilize a Bayesian approach to update the proposed model using real‐time sensor signals observed in the field and provide more accurate estimation of component residual lifetimes. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 286–303, 2014     

基于DPA的LED非线性部件逆向研究

在军事和商业应用中有很多密码算法是半公开或者不公开的,旨在证明算法保密对密码的安全性提高并没有明显帮助．针对轻型分组密码LED的未知非线性部件S盒,提出了一种基于差分功耗分析的逆向方法,该方法可以利用差分功耗曲线的极性信息来恢复未知算法结构．实验结果表明,在LED的S盒参数未知时,利用功耗采集平台采集算法运行时泄露的旁路功耗信息,可以成功逆向出全部s盒信息,验证了该方法的可行性．     

针对S盒的ARIA-128差分故障分析

针对ARIA-128分组密码进行差分故障分析,并将差分故障分析简化为求解S盒输入与输出差分问题,同时进行仿真实验。实验结果表明：ARIA-128分组密码易遭受差分故障分析攻击,8次故障注入可恢复1轮扩展轮密钥,32次故障注入即可恢复主密钥。该方法也适用于其他SPN结构的分组密码算法。     

ARIA分组密码差分功耗分析

分析了密码算法加密过程的功耗泄露模型,给出了差分功耗分析的基本原理,针对ARIA分组密码中查找S盒的功耗泄漏进行了差分功耗分析,并进行仿真实验。实验结果表明：ARIA密码中S盒查表操作功耗消耗易遭受差分功耗攻击,对800个随机明文的功耗曲线进行实验分析,可获取ARIA加密前4轮轮密钥,结合密钥扩展算法即可获取128位的主密钥。     

差动式快开阀开阀过程动力学分析与仿真

以电磁阀为先导阀,自力式差压控制的快开阀用于模拟产生管线发生破裂时的瞬间泄露工况,在设计时间内快速、稳定的开启是该阀研制的关键技术难点.分析了差动式快开阀的机构及开启原理,以流体力学基本理论为基础,建立了压降随开度变化的关系,完成了阀门开启过程动力学分析与仿真计算,得到了不同阀门开度下的开启时间、速度及加速度,阀芯运动...     

Effects of nano-sized aluminum on detonation characteristics and metal acceleration for RDX-based aluminized explosive

Nano-sized aluminum(Nano-Al)powders hold promise in enhancing the total energy of explosives and the metal acceleration ability at the same time.However,the near-detonation zone effects of reaction between Nano-Al with detonation products remain unclear.In this study,the overall reaction process of 170 nm Al with RDX explosive and its effect on detonation characteristics,detonation reaction zone,and the metal acceleration ability were comprehensively investigated through a variety of experiments such as the detonation velocity test,detonation pressure test,explosive/window interface velocity test and confined plate push test using high-resolution laser interferometry.Lithium fluoride(LiF),which has an inert behavior during the explosion,was used as a control to compare the contribution of the reaction of aluminum.A thermochemical approach that took into account the reactivity of aluminum and ensuing detonation products was adopted to calculate the additional energy release by afterburn.Combining the numerical simulations based on the calculated afterburn energy and experimental results,the param-eters in the detonation equation of state describing the Nano-Al reaction characteristics were calibrated.This study found that when the 170 nm Al content is from 0％to 15％,every 5％increase of aluminum resulted in about a 1.3％decrease in detonation velocity.Manganin pressure gauge measurement showed no significant enhancement in detonation pressure.The detonation reaction time and reaction zone length of RDX/Al/wax/80/15/5 explosive is 64 ns and 0.47 mm,which is respectively 14％and 8％higher than that of RDX/wax/95/5 explosive(57 ns and 0.39 mm).Explosive/window interface velocity curves show that 170 nm Al mainly reacted with the RDX detonation products after the detonation front.For the recording time of about 10 μs throughout the plate push test duration,the maximum plate velocity and plate acceleration time accelerated by RDX/Al/wax/80/15/5 explosive is 12％and 2.9 μs higher than that of RDX/LiF/wax/80/15/5,respectively,indicating that the aluminum reaction energy significantly increased the metal acceleration time and ability of the explosive.Numerical simulations with JWLM explosive equation of state show that when the detonation products expanded to 2 times the initial volume,over 80％of the aluminum had reacted,implying very high reactivity.These results are significant in attaining a clear understanding of the reaction mechanism of Nano-Al in the development of aluminized explosives.     

导弹发射装置伺服系统模糊PID控制研究

在某型导弹发射装置的伺服系统中,对系统的性能指标要求很高,传统的PID控制往往难以满足要求。以某型导弹发射装置的伺服系统为模型,设计了模糊PID控制器。通过与传统的PID控制器仿真实验对比,可以看出应用模糊PID控制器能够有效提高该伺服系统的动态性能和鲁棒稳定性。     

基于微分求积法的高超声速机翼蒙皮颤振研究

机翼蒙皮在高超声速气流中会发生颤振等气动弹性问题,破坏结构.引入微分求积方法,可以有效地分析机翼蒙皮的颤振问题.将机翼蒙皮等效成薄板,基于一阶活塞理论,根据克希霍夫假设及弹性理论建立蒙皮的气动弹性偏微分方程,采用微分求积法将偏微分方程离散为常微分方程,并根据频率重合理论对颤振问题进行求解.得到的颤振速度与有限元方法计算结果进行比较,误差为0 58％,验证了微分求积法在求解颤振偏微分方程时的有效性.分析了蒙皮面积、厚度、纵横比等不同参数对蒙皮颤振速度的影响.结果表明,颤振速度随蒙皮面积的增大而减小,随纵横比、厚度的增大而增大.