武警院校特色学报建设的困境与解决方略

特色学报建设是武警院校在建设现代化武警中培养高素质学术人才的必然选择。在特色办刊理念指导下,找准特色学报方向,构建特色学报梯队,开设特色栏目,培育特色学术人才,是武警院校特色学报建设的主要内容和途径。在追求武警院校人才建设,着力为建设现代化武警服务的同时,又注重追求学报建设的内在价值,发挥特色学报栏目建设的整体功能,是提升武警学术研究核心竞争力和办刊水平的基本路向。     

有初始间隙弹性摩擦接触问题的罚有限元法

针对三维有初始间隙带摩擦的弹性接触问题,提出了一种新的迭代求解方法——罚有限元法。根据接触问题局部非线性的特点,将接触区域的法向非嵌入条件及切向连续性条件作为罚因子引入系统的总势能泛函中,由最小势能原理,得出了求解有初始间隙带摩擦弹性接触问题的罚有限元公式系统。最后通过两个数值算例验证方法的正确性和有效性。     

热气溶胶灭火装置安全隐患探讨

针对目前市场上热气溶胶灭火装置＂爆炸＂及存在安全隐患,阐述了其发生原理,并提出了热气溶胶灭火装置应严格控制的一些安全性能指标和结构方式。     

针对S盒的ARIA-128差分故障分析

针对ARIA-128分组密码进行差分故障分析,并将差分故障分析简化为求解S盒输入与输出差分问题,同时进行仿真实验。实验结果表明：ARIA-128分组密码易遭受差分故障分析攻击,8次故障注入可恢复1轮扩展轮密钥,32次故障注入即可恢复主密钥。该方法也适用于其他SPN结构的分组密码算法。     

ARIA分组密码差分功耗分析

分析了密码算法加密过程的功耗泄露模型,给出了差分功耗分析的基本原理,针对ARIA分组密码中查找S盒的功耗泄漏进行了差分功耗分析,并进行仿真实验。实验结果表明：ARIA密码中S盒查表操作功耗消耗易遭受差分功耗攻击,对800个随机明文的功耗曲线进行实验分析,可获取ARIA加密前4轮轮密钥,结合密钥扩展算法即可获取128位的主密钥。     

外卡压力传感器的卡持结构设计与分析

针对外卡压力传感器存在的测试信号重复性差、信噪比低、安装局限性大的问题,设计了一种新型卡持结构——人字形结构,并从理论上分析了该结构相对于＂匚＂形夹块和环形夹块的优势。实验数据表明：采用人字形卡持结构的外卡压力传感器具有测试可靠、信噪比高、通用性好的特点。     

差动式快开阀开阀过程动力学分析与仿真

以电磁阀为先导阀,自力式差压控制的快开阀用于模拟产生管线发生破裂时的瞬间泄露工况,在设计时间内快速、稳定的开启是该阀研制的关键技术难点.分析了差动式快开阀的机构及开启原理,以流体力学基本理论为基础,建立了压降随开度变化的关系,完成了阀门开启过程动力学分析与仿真计算,得到了不同阀门开度下的开启时间、速度及加速度,阀芯运动...     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

发动机缸内压缩压力非接触式检测方法研究

发动机汽缸压缩压力是检测发动机机密封性的重要参数.发动机密封性降低,会造成发动机经济性、动力性下降及废气排放指标恶化,因此对各缸压缩压力的检测具有重要意义.现提出一种利用曲轴瞬时转速,进行不解体检测坦克发动机汽缸压缩压力的方法.通过实车测量获得缸压及转速的特征参数,利用灰色理论模型的方法建立了发动机转速脉动与汽缸压缩压力的数学关系.试验结果表明,利用这种方法进行缸内压缩压力测量是可行的.