利用拖尾能量提高蝶形天线辐射效率

蝶形天线在探地雷达中已有广泛的运用,但其辐射效率不高的问题一直存在。究其原因,主要是将近70%的辐射能量是以有碍目标探测的拖尾的形式存在。为了保证探测性能,传统上可观的拖尾能量往往以阻抗加载的方式被吸收掉。本文研究发现,当选择双极性单周波作为激励脉冲时,通过优化天线长度可以实现拖尾能量的有效利用,从而显著地提高蝶形天线的辐射效率。仿真实验结果表明,在较远的探测距离上本文方法可以将辐射效率提高近100%。通过实测实验进一步验证了本文方法的有效性。此外,本文所提的方法易于工程实现,工程应用价值十分明显。     

电离层不规则体对P波段星载SAR成像的影响

电离层不规则体导致星载合成孔径雷达（SAR）信号产生幅度及相位闪烁,严重影响低波段星载SAR的图像分辨性能。推导了具有普遍性的幂律谱对应的双频双点互相关函数。基于此研究了电离层对星载P波段SAR分辨性能的影响及其规律。研究表明,电离层不规则体导致星载P波段SAR两维分辨率恶化,图像峰值增益损失严重。电离层不规则体强度,谱指数,外尺度等参数的增大都会导致星载SAR图像分辨率及峰值增益进一步下降。基于相位屏技术的数值仿真结果验证了本文研究。     

LDO稳压器敏感度建模与仿真技术

基于LDO稳压器在电磁干扰（EMI）下产生直流偏移失效的机理分析,展开敏感度建模与仿真方法研究。使用一款实验芯片,创新地引入片上电压传感器,用于测试EMI在LDO稳压器内部的传播特性。在敏感度建模中,建立等效电路模型,通过直流功能测试,Z参数阻抗特性测试验证模型的正确性,将该模型用于LDO稳压器的敏感度预测。在敏感度仿真过程中,通过分析关键子电路和不断增加寄生元件,仿真不同寄生因素对敏感度影响的权重。将仿真结果与传导直接注入法（DPI）片上测试结果对比,仿真结果与DPI测试在频域1MHz至1GHz匹配。     

一种利用GPS载波相位姿态测量的方法

GPS初始整周模糊度的求解是利用载波相位进行测量时的关键问题.采用了对系数矩阵进行QR分解的方法,用以降低矩阵的维数.模糊度搜索时,针对Z变换可能会引入多余误差,采用了对称三角分解法对协方差矩阵进行去相关处理.实验与仿真结果表明,定位误差在0.5 cm以内,方位角和仰角误差在0.1°以内.     

基于凸优化理论的三维微分对策制导规律求解

针对三维微分对策制导律(DGL)求解问题,引入凸优化理论,将DGL求解归结到Hamilton系统的求解,设计了DGL求解算法,通过对代价函数梯度特征的凸分析,推导出对策系统鞍点存在的充要条件和求解方法,解决了以往通过对微分对策模型简化求解导致的模型不能客观反映作战过程的问题.     

面向反导预警作战的雷达交接班时机选择方法

针对反导预警作战过程中远程预警相控阵雷达(early-warning radar,EWR)和多功能地基相控阵雷达(ground-based radar,GBR)探测跟踪弹道导弹的交接班问题,提出了一种可行的雷达交接班时机选择方法.该方法通过卡尔曼滤波对弹道目标进行滤波定轨,基于目标瞬时运动状态估算目标剩余飞行距离,并依据GBR对目标的探测定位精度(geometrical dilution of precision,GDOP)进行接班时机优选,以支持反导预警作战雷达交接班决策.最后,通过一个实例验证了该方法的可行性和有效性.     

目标起伏特性对雷达威力性能的影响分析

介绍了典型雷达目标RCS起伏模型,阐述了起伏目标在实际中的应用,建立了目标损耗和雷达作用距离之间的关系,为不同目标的等效替代推算提供了理论依据.验证了雷达目标满足卡平方分布时发现概率和起伏因子之间的关系.并针对不同类型的起伏目标,建立了雷达探测距离和发现概率之间的关系,为雷达的威力检测和飞行目标的航线设计提供依据.     

基于多假设跟踪弹道导弹主动段跟踪算法

针对弹道导弹主动段防御中多枚弹道导弹同时跟踪问题,提出了基于多假设思想的主动段跟踪算法.重点阐述了该算法中假设生成、假设概率计算、假设约简以及假设剪枝等环节.从工程实用的角度出发,采用求解一个线性分配问题(LAP)方法得到M个最优假设,大大减少了假设数量,并运用N-scan回溯剪枝方法对假设进行剪枝,确定要输出的航迹,提高了算法的效率和实用性.仿真实验表明,该算法能够对主动段多枚弹道导弹目标准确关联跟踪.     

Adaptive sliding mode control of modular self-reconfigurable spacecraft with time-delay estimation

The reconstruction control of modular self-reconfigurable spacecraft (MSRS) is addressed using an adaptive sliding mode control (ASMC) scheme based on time-delay estimation (TDE) technology. In contrast to the ground, the base of the MSRS is floating when assembled in orbit, resulting in a strong dynamic coupling effect. A TED-based ASMC technique with exponential reaching law is designed to achieve high-precision coordinated control between the spacecraft base and the robotic arm. TDE technology is used by the controller to compensate for coupling terms and uncertainties, while ASMC can augment and improve TDE’s robustness. To suppress TDE errors and eliminate chattering, a new adaptive law is created to modify gain parameters online, ensuring quick dynamic response and high tracking accuracy. The Lyapunov approach shows that the tracking errors are uniformly ultimately bounded (UUB). Finally, the on-orbit assembly process of MSRS is simulated to validate the efficacy of the proposed control scheme. The simulation results show that the proposed control method can accurately complete the target module’s on-orbit assembly, with minimal perturbations to the spacecraft’s attitude. Meanwhile, it has a high level of robustness and can effectively eliminate chattering.     

One-bit splitting deceptive jamming against SAR

One-bit quantization is a promising technique due to its performance retention and complexity reduction in a deceptive jammer against synthetic aperture radar (SAR). In this paper, the 1-bit quantization technology is utilized to agilely generate split false targets in the SAR imagery once the radar signal is intercepted, which reduces the complexity of the jammer significantly with guaranteed focusing quality. A single-frequency threshold is used to decompose harmonics incurred by the 1-bit quantization, and its parameters are adjusted through different pulse repetition intervals to provide steerable modulations. In this way, the SAR signal is split into coupled false scatterers during the 1-bit interception. By further deploying amplitude, time-delay, and Doppler frequency modulations on the 1-bit intercepted signal, the split false targets are created. The proposed approach is compared with different deceptive jamming methods to show its validity in effectiveness and cost, and numerical experiments are also presented for verification.