利用最小二乘支持向量机求解潜艇内外磁场映射模型

为提高潜艇磁隐身能力,应对潜艇固定磁场进行实时监测,提出利用最小二乘支持向量机的潜艇内外磁场映射方法。结合内外映射法和最小二乘支持向量机原理,通过交叉验证优化模型参数,建立由内到外的潜艇磁场映射模型。以潜艇外部垂向固定磁场变化量为分析对象,仿真和实验结果均与标准值吻合良好。与径向基神经网络算法相比,该方法的泛化能力和推算精度有明显提高,且更符合工程实际,对闭环消磁技术的研究具有指导意义。     

航天装备备件配置现状SWOT分析及对策研究

全面分析航天装备备件配置现状,把握备件配置优化的主要方向,形成推动备件配置水平快速提升的关键策略,是提高航天装备备件保障科学性和高效性的重要基础。本文通过SWOT分析法对航天装备备件配置现状的优势、劣势、机遇和威胁进行了系统剖析,并在此基础上构建SWOT分析矩阵,进而基于矩阵因素的不同组合形式,研究形成改进航天装备备件配置现状、提高备件配置科学性的四种关键策略,即抓住机遇、发挥优势的S-O策略,利用机遇、克服不足的W-O策略,利用优势、应对威胁的S-T策略和弥补不足、应对威胁的W-T策略,提出当前应重点解决备件需求提报精度、库存配置科学性和协调激励机制三个现实问题,为开展航天装备备件配置问题深入研究明确了重点、确定了方向。     

Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.     

Damage assessment of the target area of the island/reef under the attack of missile warhead

Under the background of vigorously developing facilities of island/reef in the world, the economic value and strategic significance of the island/reef have become increasingly important. Unfortunately, they may easily become the attacking target of missiles in the war time. Therefore, aiming at the damage quantification of the targets in the island/reef under the missile attacking, a macroscopic damage assessment model for the target area is proposed in this paper. The model focuses on the construction of the assessment model framework. Firstly, the analytic hierarchy process and the grey relational analysis are applied to measure the importance of each target in the region through four indicators of the target hazard, striking urgency, damage advantage and mission relevance, respectively. Secondly, based on the damage mechanism of shock wave and fragments to target, the corresponding damage model is established, and the damage grade of each target in the evaluated area is obtained according to the damage criteria and grading standard. Finally, the model obtains the overall damage grade of the target area by employing the fuzzy comprehensive evaluation method, with synthesizing the importance and the damage grade of each target. Through the verification of an example, it demonstrates the certain feasibility of the model and provides a certain basis and reference for the subsequent research.     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

四支板超声速引射器性能特性试验

对二维喷管构型的四支板超声速引射器进行冷流试验,分析启动、负载匹配方面的性能特性。试验结果表明:启动特性方面,四支板超声速引射系统的盲腔压力低于3 kPa,引射器入口腔压的迟滞压力比启动压力低15.9%。负载匹配特性方面,四支板引射器在小引射系数、大增压比状态下具有十分明显的优势,当引射系数为0.04时,增压比为11.21;当引射系数为0.10时,增压比为7.0。因此,二维喷管构型的多支板超声速引射器具有良好的启动、负载匹配性能,工程应用潜力较大。     

智能化作战指挥模式需求

智能装备已经走入军队、走向战场,创建智能化作战指挥模式是智能化时代作战指挥的必然发展趋势,智能化作战指挥模式需求分析可为智能作战问题研究提供有效的信息。智能化作战指挥模式的需求分析已经具备了一定的物质、理论和技术基础,同时,也具有了一定的构建思路、实践条件和实验平台。在此基础上,本文从军事需求、功能需求和技术需求以及构建要求四个不同角度进行需求分析,以找准创建需求,为后续工作进一步展开奠定基础。     

基于层次分析法的军校学员体能训练评估

针对目前军校学员军事体育训练评估难以量化考核的问题,提出了基于层次分析法的军校学员体能训练评估方法。首先,通过建立评估指标体系,构建评估指标判断矩阵;其次,进行归一化并计算指标组合权重,构建评估基本模型;最后,利用评估模型对学员体能训练进行综合评估。结果表明本文提出的方法能够对军校学员体能训练进行有效评估,相比于传统考核评估方法更能反映出学员体能的真实状况,突出学员体能特征,开展针对性训练。      

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.