超高速碰撞形成一次碎片云特性

对超高速碰撞数值模拟方法进行了讨论.采用ANSYS/AUTODYN程序的SPH方法,对球形弹丸超高速撞击时弹丸的破碎、碎片云的形成及扩展过程进行数值模拟,其结果与实验结果进行比较,并验证了计算方法和模型参数的正确性.在此基础上采用数值模拟方法,对钨合金、轧制均质装甲及LY12铝三种材料的球形弹丸超高速撞击靶板之后形成的一次碎片云形貌及演化规律进行了研究,并基于量纲分析方法得出了碎片云特征参数(碎片云头部速度、径向最大膨胀速度及膨胀角)随初始撞击条件的变化规律。     

基于三粒子纠缠态的量子安全直接通信协议

提出了一种新的三粒子量子安全直接通信协议。通信过程利用decoy光子来检测窃听,保证信道安全。发送方将秘密消息编码在不同幺正操作上,通信双方通过Bell基和Z基测量可直接传递秘密消息。由于所有粒子都用于传输秘密消息,且传输一次可获得两比特信息,该协议具有较高的量子比特及量子密码协议效率;三粒子纠缠态的制备是已实现技术,该协议具有实际操作的意义。此外,该协议在量子信道中也是安全的。     

月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

Investigation of normal,lateral, and oblique impact of microscale projectiles into unidirectional glass/epoxy composites

Spacesuits and spacecraft must endure high velocity impacts from micrometeoroids. This work considers the impact of 100 μm diameter projectiles into composite targets at velocities from 0.5 km/s to 2 km/s. This work begins by presenting an energy-based theoretical model relating depth of penetration (DoP) and impact force to impact velocity, characteristic time, and threshold velocity and force. Next, this work compares numerical simulations of normal impact on composites to the theoretical model. Numerical simulations are conducted with LS-DYNA and the well-known composite model, MAT-162. The numerical models consider unidirectional S2-glass fiber reinforced SC-15 epoxy composite laminates. The numerical model shows good correlation with the theoretical model. The numerical model also investigates lateral impact, parallel to the fiber direction, and oblique impact at angles from 30° to 82.5°. This work decomposes oblique impact into normal and lateral components, and compares them with normal and lateral impact results. The results show good correlation of the normal component of oblique results with the theoretical model. This numerical and theoretical study focuses on DoP, velocity, and penetration resistance force as functions of time. The theoretical model and numerical simulations are used to determine new DoP parameters: characteristic time of depth of penetration and threshold impact velocity. These models are a first step in developing the capability to predict DoP for oblique, microscale, high-speed impact on composite materials.     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

永磁无刷直流电机驱动器并联系统环流的抑制

驱动器并联方式能有效扩大驱动容量,但该方式容易引入环流。为了抑制环流,分析了两个独立电源供电的两台驱动器并联结构系统,阐述了环流的特性,并提出了基于环流反馈的控制结构。这种控制结构通过环流的反馈,只需要控制调整其中一台驱动器,就可减小两台驱动器输出电压的差异,实现环流抑制。仿真结果表明:这种控制结构降低了控制的复杂性,能够抑制环流,实现独立电源供电的无刷直流电机驱动器并联。     

强爆轰驱动超高速碎片发射装置设计因素分析

为了得到发射装置设计因素和超高速碎片性能间的关系,考虑了药型罩的材料、炸药种类、装药长径比、药型罩的锥角、药型罩的厚度、药型罩顶部靠近装药侧的曲率半径等设计因素,采用AUTODYNTM,结合正交试验,对超高速碎片的发射过程进行数值模拟。结果表明,3种发射装置结构分别可以提供质量为1. 533 g的紫铜碎片、速度为11. 649 km/s的铝碎片、动能为85. 6 k J的铝碎片; 2种发射装置结构均可以提供质量大于1 g、速度高于11 km/s的密实结构圆柱状碎片。验证了仿真方法的可信性,对影响碎片性能的设计因素进行了分析、排序,并得到了这些设计因素与碎片质量、速度、动能的关系。     

满足大动压模拟要求的试验弹道优化设计

为了解决弹道导弹在高海拔发射场进行飞行试验时的大动压检验问题,提出一种模拟大动压条件的试验弹道设计方法。针对发射场的实际特点,建立残骸再入的动力学模型与落区边界模型;将大动压模拟条件转化为过程约束,提出一种主动段联合优化策略。基于自适应模拟退火算法,分别设计了三组满足不同大动压模拟条件和各项约束的试验弹道,并给出了对应的落区调整方案,验证了该方法的可行性。设计结果表明,最大动压主要出现在一级,一级最大负攻角增加,则最大动压也明显提高;同时调整发射方位角和二、三级程序角可以保证试验弹道满足弹头落点约束条件。     

Great-power Responsibility,Side-effect Harms and American Drone Strikes in Pakistan

In International Relations (IR), the actions of great powers are usually assessed through their direct effects. Great powers are generally considered to be responsible for the consequences of their actions if they intentionally caused them. Although there is discussion on “double-effects” and “side-effect harms” in the realms of philosophy and political sociology, these largely remain absent from the field of IR. This article bridges that gap by clarifying a set of yardsticks through which side-effect harms of great powers’ actions can be evaluated, including “capacity”, “historical precedent”, “voluntarism” and “unintentional causality”. These yardsticks are deduced through the Theory of Special Responsibilities, which combines elements of Constructivism and the English School. The theoretical framework presented is then applied to the case of American drone strikes in the Federally Administered Tribal Areas (FATA) of Pakistan. A number of terrorists in FATA have relocated elsewhere within Pakistan to escape these strikes, subsequently harming individuals in new locations. The article asks: who bears responsibility for the harm brought to civilians by these dislocated terrorists? Analysis from the perspective of the theoretical framework, constructed and applied here, suggests that even if the US may claim not to have directly intended such an outcome, it still shares some responsibility for the harm to innocent civilians.     

轮毂电机驱动车辆转向控制策略

为提高轮毂电机驱动车辆转向机动灵活性以及安全稳定性,提出了一种基于直接横摆力矩控制的转向控制策略。以带有双桥转向机构的8轮轮毂电机驱动车辆为研究对象,研究其双重转向控制问题,建立基于车辆二自由度单轨模型的车辆参考模型,并以横摆角速度作为控制变量,建立基于横摆力矩PID控制器和横摆力矩分配控制器的转向分层控制模型。利用硬件在环实时仿真实验对所提出的转向控制策略的可行性和有效性进行分析验证。