Development of cost effective personnel armour through structural hybridization

The objective of the present study is to develop cost effective thermoplastic hybrid laminate using Dyneema® HB50 and Tensylon®HSBD 30A through structural hybridization method. Laminates having 20 mm thickness were fabricated and subjected to 7.62 × 39 mm mild steel core projectile with an impact velocity of 730 ± 10 ms⁻¹. Parameters such as energy absorption, back face deformation and rate of back face deformation were measured as a function of hybridization ratio. It was observed that hybrid laminate with 50:50 ratio (w/w) of Tensylon® and Dyneema® with Tensylon® as front face showed 200% more energy absorption when compared to 100% Tensylon® laminate and showed equal energy absorption as that of expensive 100% Dyneema® laminate. Moreover, hybrid laminate with TD50:50 ratio showed 40% lower in terms of final back face deformation than Dyneema® laminate. Rate of back face deformation was also found to be slow for hybrid laminate as compared to Dyneema® laminate. Dynamic mechanical analysis showed that, Tensylon® laminate has got higher stiffness and lower damping factor than Dyneema® and hybrid laminates. The interface between Tensylon® and Dyneema® layers was found to be separating during the penetration process due to the poor interfacial bonding. Failure behaviour of laminates for different hybridization ratios were studied by sectioning the impacted laminates. It was observed that, the Tensylon® laminate has undergone shear cutting of fibers as major failure mode whereas the hybrid laminate showed shear cutting followed by tensile stretching, fiber pull out and delamination. These inputs are highly useful for body armour applications to design cost effective armour with enhanced performance.     

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Shock wave is emitted into the plate and sphere when a sphere hypervelocity impacts onto a thin plate. The fragmentation and phase change of the material caused by the propagation and unloading of shock wave could result in the formation of debris cloud eventually. Propagation models are deduced based on one-dimensional shock wave theory and the geometry of sphere, which uses elliptic equations (corresponding to ellipsoid equations in physical space) to describe the propagation of shock wave and the rarefaction wave. The “Effective thickness” is defined as the critical plate thickness that ensures the rarefaction wave overtake the shock wave at the back of the sphere. The “Effective thickness” is directly related to the form of the debris cloud. The relation of the “Effective thickness” and the “Optimum thickness” is also discussed. The impacts of Al spheres onto Al plates are simulated within SPH to verify the propagation models and associated theories. The results show that the wave fronts predicted by the propagation models are closer to the simulation result at higher impact velocity. The curvatures of the wave fronts decrease with the increase of impact velocities. The predicted “Effective thickness” is consistent with the simulation results. The analysis about the shock wave propagation and unloading in this paper can provide a new sight and inspiration for the quantitative study of hypervelocity impact and space debris protection.     

小型直流发电机输出特性自动测试系统

提出了一种基于PC机的小型直流发电机输出特性自动测试系统 ,该系统利用直流变送器测量发电机输出功率 ,并给出了试验结果。     

军事设施建设项目环境影响评价有关问题分析及建议

根据《中国人民解放军环境保护条例》,军事设施建设项目应进行环境影响评价。由于军事项目建设内容高度机密、国防需要迫切、建设时间紧迫等,再加上一些从事军事设施项目建设的管理人员对环境影响评价的理解还存在某些偏差,使许多军事设施建设项目未进行环境影响评价,影响了我军的环境保护工作。简要介绍了军事设施的范围及军事设施建设项目的环境影响评价概况,结合军事设施建设项目环境影响评价中出现的一些问题,提出了进行军事设施建设项目环境影响评价工作的几点建议。     

基于Logistic映射的混沌序列扩频序列生成算法

直序扩频通信系统中,扩频序列的各项性能指标直接影响到通信系统的扩频增益、抗干扰性能以及多用户复用性能等。混沌序列具有良好的相关性、可重生性等特性,可作为理想的直序扩频码应用于低压电力线通信中。对混沌扩频技术在电力线通信中的应用进行了探讨,提出了一种利用Logistic映射得到大量适用于直序扩频系统的混沌扩频序列的算法,并在Matlab环境下编程实现了该算法。在此基础上分析了所得混沌序列的性能并与M序列、Gold序列加以比较,证明了算法的可行性。     

弹道导弹落点预报的雷达系统仿真

根据弹道理论建立了雷达探测弹道导弹的仿真模型 ,并对仿真的雷达探测跟踪弹道数据给出了处理方法 ,预报了导弹落点范围 ,并与理论落点进行了比较 ,给出落点精度。仿真结果表明 :雷达对导弹的探测数据经过一定数据处理 ,可得到预定的落点精度 ,说明该种仿真方法是可行的     

控制速度方向的弹道修正导引方法

由于制导炮弹由身管武器发射,其飞行控制能力和导引信息量有限,故基于预测落点位置偏差量来修正速度方向并在控制时间内连续分配导引指令的思想提出一种新的三维末制导方法。根据非线性弹道方程组的级数解预测弹丸落点位置,得到落点与目标的偏差,并提出两种通过此偏差解算当前速度方向修正量的方法。取剩余飞行时间为修正时间,通过将速度方向修正量分配到整个剩余导引段建立加速度修正公式,从而减小导引指令饱和的可能性。通过连续地预测落点和分配加速度指令来实时地导引飞行。仿真结果表明:该导引方法简单可行,精度高,对控制能力要求较低,且具备较好的制导效果和毁伤效果,可为该体制制导炮弹的应用提供参考依据。     

警卫工作经验对警卫人员素质的影响

经验是构成警卫人员业务素质的主要内容.其中直接经验可以大幅提升警卫人员的能力,而间接经验则是警卫人员素质生成的主要渠道.因此,必须充分认识两种经验在警卫人员素质生成中的作用,既要注重直接经验的获取,更要重视间接经验的不可替代性.     

导弹制导控制与目标杀伤

采用协方差分析描述函数技术 (CADFT)对寻的导弹的制导精度进行了研究 ,提出了空气动力控制、直接侧向力控制的寻的导弹飞行末端的制导精度的一种新的解析模型 ,并研究了导弹直接碰撞杀伤目标的必要条件 ,该理论研究成果具有简单、实用、精度高的特点 ,为寻的导弹制导控制特性研究和揭示寻的理论普遍规律提供了一种新途径     

利用MSC/DYTRAN程序仿真分析导弹战斗部立方体破片的侵彻威力

对反辐射导弹的破片杀伤战斗部中较为常见的立方体破片的 3种典型姿态侵彻 (尖端、棱边及正面侵彻 ) 4mm厚 94 5钢的侵彻过程进行仿真数值计算 .通过仿真计算 ,结合实验结果比较 ,得出结论 :不同初始侵彻姿态的立方体破片在侵彻过程中 ,由于旋转角速度的作用及稳定性的要求 ,破片的侵彻姿态将趋于正面侵彻 .不同姿态的侵彻 ,侵彻威力相差不大