基于数据压缩的LSP参数高效量化算法

文中为解决超长帧编码系统中联合帧数过多导致LSP参数量化性能下降这个问题,将多项式拟合引入超长帧编码系统中,利用多项式拟合压缩LSP参数矩阵,以降低量化时实际联合的帧数。再用分裂矩阵量化器进行量化。仿真结果表明,在120 bps的参数量化速率下,此算法的量化性能优于矩阵量化算法(MQ),平均谱失真比MQ算法降低了0.0719 dB,平均分段信噪比提高了0.1971 dB。     

The multiplicative representation for multiple objectives optimization with an application for arms procurement

Multiple Objectives Optimization is much seen in combination with linear functions and even with linear programming, together with an adding of the objectives by using weights. With distance functions, normalization instead of weights is used. It is also possible that together with an additive direct influence of the objectives on the utility function a mutual utility of the objectives exists under the form of a multiplicative representation. A critical comment is brought on some representations of this kind. A full‐multiplicative form may offer other opportunities, which will be discussed at length in an effort to exclude weights and normalization. This theoretical approach is followed by an application for arms procurement. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 327–340, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10014     

Optimal switchover times between two activities utilizing the same resource

The “gold‐mining” decision problem is concerned with the efficient utilization of a delicate mining equipment working in a number of different mines. Richard Bellman was the first to consider this type of a problem. The solution found by Bellman for the finite‐horizon, continuous‐time version of the problem with two mines is not overly realistic since he assumed that fractional parts of the same mining equipment could be used in different mines and this fraction could change instantaneously. In this paper, we provide some extensions to this model in order to produce more operational and realistic solutions. Our first model is concerned with developing an operational policy where the equipment may be switched from one mine to the other at most once during a finite horizon. In the next extension we incorporate a cost component in the objective function and assume that the horizon length is not fixed but it is the second decision variable. Structural properties of the optimal solutions are obtained using nonlinear programming. Each model and its solution is illustrated with a numerical example. The models developed here may have potential applications in other areas including production of items requiring the same machine or choosing a sequence of activities requiring the same resource. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 186–203, 2002; DOI 10.1002/nav.10008     

海洋环境中基于WVD的LFM信号检测方法

海洋环境中弱信号的谱与海杂波的谱相混叠 ,目标和背景的位置差异很小 ,经典的频域或空域处理对海杂波中弱信号的检测难以奏效。鉴于Wigner-Ville分布 (WVD)对线性调频信号 (LFM )具有时频聚集性这一特点 ,提出了一种海洋环境中基于WVD的LFM信号检测方法。利用雷达采集的真实海杂波数据 ,在不同信杂比的条件下 ,研究了该方法与经典频域法在信号检测中的差别。通过实验分析 ,与经典方法相比 ,该方法具有明显的优越性 ,且信杂比达到 -14 . 3dB时 ,其仍能很好地对信号进行检测。     

HLA联邦的桥接扩展和影响时空一致性的实例分析

随着计算机技术和仿真应用的发展 ,越来越需要组建大规模分布仿真系统 ,HLA框架的定义和应用为此提供了很好的契机。使用桥接技术把不同的联邦连接起来是构建大规模联邦的有效方法 ,其中桥接邦元更适合于不同RTI的异地连接。桥接HLA联邦会带来影响系统时空一致性和性能的新问题 ,时间推进和所有权转移是两个有代表性的例子 ,需要重点解决     

DIS系统中实时通讯技术的研究

针对DIS系统实时通讯的要求 ,以UDP通讯协议为基础 ,结合采用多线程技术 ,给出了一种实时通讯方法 .经模拟试验表明该方法在WindowsNT环境下是有效的 .     

导弹光学告警系统及对抗技术综述

详述了导弹羽烟热辐射的光电高速采集方法 ,并实时对导弹逼近告警。同时介绍了国外红外告警技术的发展现状     

大气层内复合控制拦截弹切换时间的探讨

大气层内拦截弹采用空气动力与燃气动力的复合控制方式是当今世界防空导弹的发展方向之一。复合控制技术的分析研究是当前急需解决的重要问题。在考虑目标机动加速度大小、目标机动时刻以及目标角闪烁的条件下 ,确定了拦截弹的控制方式由空气动力切换到复合控制时的切换时间。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003