浅析小型史馆建筑内部展示造型与多媒体表现

作为现代展览展示建筑的一个发展分支,小型史馆就是一部精练的“物化”历史,表达出一个丰富而统一的信息传播展示空间。小型史馆的设计往往在有限的空间内,充分体现出观演类建筑的主要特点,其内部的展示造型设计和多媒体表现手段起到了重要的作用。主要从小型史馆建设出发,对其内部展示造型设计与多媒体表现手段进行分析与探讨,阐述了它们的设计手法及达到的视觉创意效果。     

船舶操纵模拟器立体视景系统理论、方法和实现的研究

在船舶操纵模拟器中,视景系统的立体显示为场景中物体的空间关系提供重要的视觉信息,并大大地增强了三维场景的真实感。分析了立体显示方法的原理,介绍了多通道立体显示系统所需的设备及环境,提出了基于Vega的船舶操纵模拟器的立体显示视景系统结构框架,阐述了Vega中场景初始化的方法及立体显示参数的设置,并实现了基于Vega的船舶操纵模拟器视景系统的立体显示,提高了船舶操纵模拟器视景系统的逼真度。     

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device

As an essential component of ammunition, pyrotechnics can control ignition with high reliability. However, due to limits of fabrication technology, traditional pyrotechnics are bulky. To achieve both functionality and miniaturization, MEMS pyrotechnics integrate initiator, safety-and-arming (S&A) device and lead charge and keep all components within a small size. MEMS S&A devices, as the core component to ensure system safety, are difficult to achieve active and rapid response to control signals with high safety and reliability. In order to overcome the difficulty, we propose the design and characterization of a MEMS pyrotechnic with a double-layer barrier S&A device. The MEMS pyrotechnic is a high-integrated device with an overall size of 13.4 × 8.5 × 5.2 mm³. The initiator is a NiCr bridge foil covered with an Al/CuO energetic film, which can generate flame when ignited by an excitation voltage. To match the flame energy, lead styphnate is chosen in this study as the lead charge. The S&A device contains four semi-circular barriers, which are directly driven by V-shape electro-thermal actuators to gain active control of the pyrotechnics' ignition condition with rapid response. To improve the system's reliability, the four barriers are axisymmetrically placed in two layers, two barriers for each layer, to constitute a double-layer structure with a thickness of 100 μm. The ignition test results show that the S&A device can prevent the initiator from detonating the lead charge in safety condition. In arming condition, the lead charge will be detonated.     

一种雷情录报显示系统的实现

针对当前部分雷达装备在报情方面存在的问题 ,提出了一种雷情录报显示系统。系统由数据录取板和读报显示板两大部分组成 ,将两块模板嵌入现役装备中 ,可改善部分雷达报情的自动化程度和测报数据的精度     

某型飞机采用DCCIP方式投放炸弹的精度分析

分析了影响DCCIP攻击方式轰炸精度的各种误差源,针对某型飞机平显火控系统的不同组合方式,建立了相应的精度分析数学模型,采用定型试飞数据,仿真计算了各种组合方式下的水平DCCIP轰炸精度.仿真计算结果与定型靶试数据吻合,在某型飞机平显火控系统的靶试的定型中得到了实际应用.     

基于虚拟仪器的液压增压器模拟装置

为搭建指控系统维修和模拟训练平台,根据液压增压器的工作原理,建立液压增压器的数学模型,在此基础上采用虚拟仪器技术和单片机技术设计并实现了液压增压器模拟装置。试验结果表明模拟装置与指控系统连接,能够正确地完成液压增压器的实时模拟功能,模拟结果与实物一致。     

电磁辐射对桥丝式电火工品性能影响研究

利用传导方法研究射频对桥丝式电火工品的桥丝电阻、烤爆、迟发火以及瞎火等性能影响。研究结果表明,在10％发火功率和0．4MHz的敏感频率条件下,所研究的3种电火工品在照射1～5min后,电阻增加1.2％～7．4％,并且17．3％的试样在照射的过程中出现了烤爆;在对经过照射后的试样进行正常的发火感度试验中,发火时间显著增加,出现了不同程度的迟发火,16．9％的试样瞎火。     

微电子器件方波EMP注入敏感端对的实验研究

采用方波注入法,对国外某知名公司生产的两个批次的晶体管进行了实验,比较了从CB结反向注入与从EB结反向注入的损伤电压值,发现该类器件的EMP敏感端对与人们一般研究的结论有所不同。     

空中预警机

本文说明什么是空中预警机,它在战争中的作用,以及E-2C 空中预警机的特点。详细叙述了E-3A 的六个航空电子设备分系统和空中预警机的发展趋势。     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.