干扰抑制类生成式对抗网络

为进一步改善超低频频段的通信质量,在传统改进广义旁瓣抵消算法的基础上,提出新的超低频干扰抑制算法——生成式旁瓣抵消算法。该算法将人工智能研究热点之一的生成式对抗网络模型引入广义旁瓣抵消算法中,通过优化设计生成模型的网络结构及相关超参数,有效地解决了原算法存在的期望信号残留问题,为旁瓣抵消通道中的后级滤波算法提供了与主通道相关性更强的干扰参考信息,从而提高了算法对主通道干扰估计的准确性。为了验证优化后生成模型的有效性以及所提算法对不同类别干扰的抑制能力,在实验室环境下搭建实验平台,设计了多组对照实验。实验结果表明:优化后的生成模型具有较好的生成能力、较好的鲁棒性以及相对较低的运算复杂度;相比于传统改进的广义旁瓣抵消算法,所提算法进一步提高了信号带宽内的信干噪比。     

利用最小二乘支持向量机求解潜艇内外磁场映射模型

为提高潜艇磁隐身能力,应对潜艇固定磁场进行实时监测,提出利用最小二乘支持向量机的潜艇内外磁场映射方法。结合内外映射法和最小二乘支持向量机原理,通过交叉验证优化模型参数,建立由内到外的潜艇磁场映射模型。以潜艇外部垂向固定磁场变化量为分析对象,仿真和实验结果均与标准值吻合良好。与径向基神经网络算法相比,该方法的泛化能力和推算精度有明显提高,且更符合工程实际,对闭环消磁技术的研究具有指导意义。     

Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.     

Damage assessment of the target area of the island/reef under the attack of missile warhead

Under the background of vigorously developing facilities of island/reef in the world, the economic value and strategic significance of the island/reef have become increasingly important. Unfortunately, they may easily become the attacking target of missiles in the war time. Therefore, aiming at the damage quantification of the targets in the island/reef under the missile attacking, a macroscopic damage assessment model for the target area is proposed in this paper. The model focuses on the construction of the assessment model framework. Firstly, the analytic hierarchy process and the grey relational analysis are applied to measure the importance of each target in the region through four indicators of the target hazard, striking urgency, damage advantage and mission relevance, respectively. Secondly, based on the damage mechanism of shock wave and fragments to target, the corresponding damage model is established, and the damage grade of each target in the evaluated area is obtained according to the damage criteria and grading standard. Finally, the model obtains the overall damage grade of the target area by employing the fuzzy comprehensive evaluation method, with synthesizing the importance and the damage grade of each target. Through the verification of an example, it demonstrates the certain feasibility of the model and provides a certain basis and reference for the subsequent research.     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

基于层次分析法的军校学员体能训练评估

针对目前军校学员军事体育训练评估难以量化考核的问题,提出了基于层次分析法的军校学员体能训练评估方法。首先,通过建立评估指标体系,构建评估指标判断矩阵;其次,进行归一化并计算指标组合权重,构建评估基本模型;最后,利用评估模型对学员体能训练进行综合评估。结果表明本文提出的方法能够对军校学员体能训练进行有效评估,相比于传统考核评估方法更能反映出学员体能的真实状况,突出学员体能特征,开展针对性训练。      

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

感应式磁性天线设计及干扰抑制算法研究

当期望信号和干扰同方向时,为了有效改善超低频频段的通信质量,提出了一种基于模拟电路预处理和改进广义旁瓣抵消的干扰抑制算法,设计了磁性天线、低噪声前置放大电路,制作了灵敏度较高的磁传感器,有效地抑制了工频及其谐波干扰。鉴于超低频频段的信号十分微弱,在广义旁瓣抵消算法的基础上做了几点改进,为主通道提供较多的参考信息,从而提高了算法的性能,有效地解决了传统算法失效的问题。为了验证所提算法的有效性,在实验室环境下搭建实验平台,设计了多组对照实验,实验结果表明:无论期望信号与干扰是否同方向,改进后的广义旁瓣抵消算法相比原来的算法,在信噪比的提升和噪声底限的降低等方面均有较大程度的改善。     

高超声速飞行器低可探测性滑翔弹道优化方法

为进一步提高高超声速飞行器的突防性能,提出高超声速飞行器低可探测性滑翔弹道优化方法。考虑飞行器180°×360°方向的雷达散射截面,针对原数据尖峰多、收敛难的难题,运用高斯滤波法对其进行预处理,既不改变原数据趋势又加以平滑,提高优化问题收敛性能。为使计算所用雷达散射截面数据具备较强的保真性,采用三次样条插值方法调用离散数据计算实时雷达散射截面。完成了高超声速飞行器低可探测性滑翔弹道优化问题的建模,以探测概率为目标函数,运用hp自适应Radau伪谱法优化求解,采用逐步计算策略进一步提高优化效率和收敛性能。与传统最短飞行时间弹道对比表明,该方法有效降低了飞行器被雷达发现的概率。     

模糊变权法在通信保障能力评估中的应用

分析了通信保障应注重提高的六种能力,给出了运用模糊变权法求变化权重的方法,并通过示例计算进行分析,得出结论,为通信保障能力评估提供了一定的理论依据。