Bi‐objective missile rescheduling for a naval task group with dynamic disruptions

This paper considers the rescheduling of surface‐to‐air missiles (SAMs) for a naval task group (TG), where a set of SAMs have already been scheduled to intercept a set of anti‐ship missiles (ASMs). In missile defense, the initial engagement schedule is developed according to the initial state of the defensive and attacking units. However, unforeseen events may arise during the engagement, creating a dynamic environment to be handled, and making the initial schedule infeasible or inefficient. In this study, the initial engagement schedule of a TG is assumed to be disrupted by the occurrence of a destroyed ASM, the breakdown of a SAM system, or an incoming new target ASM. To produce an updated schedule, a new biobjective mathematical model is formulated that maximizes the no‐leaker probability value for the TG and minimizes the total deviation from the initial schedule. With the problem shown to be NP‐hard, some special cases are presented that can be solved in polynomial time. We solve small size problems by the augmented ? ‐ constraint method and propose heuristic procedures to generate a set of nondominated solutions for larger problems. The results are presented for different size problems and the total effectiveness of the model is evaluated.     

A stochastic air combat logistics decision model for Blue versus Red opposition

Technologically advanced aircraft rely on robust and responsive logistics systems to ensure a high state of operational readiness. This paper fills a critical gap in the literature for combat models by closely relating effectiveness of the logistics system to determinants of success in combat. We present a stochastic diffusion model of an aerial battle between Blue and Red forces. The number of aircraft of Blue forces aloft and ready to be aloft on combat missions is limited by the maximum number of assigned aircraft, the reliability of aircraft subsystems, and the logistic system's ability to repair and replenish those subsystems. Our parsimonious model can illustrate important trade‐offs between logistics decision variables and operational success.     

Excess procurement strategies by a dominant buyer under constrained supply

Supply chains are often characterized by the presence of a dominant buyer purchasing from a supplier with limited capacity. We study such a situation where a single supplier sells capacity to an established and more powerful buyer and also to a relatively less powerful buyer. The more powerful buyer enjoys the first right to book her capacity requirements at supplier's end, and then the common supplier fulfills the requirement of the less powerful buyer. We find that when the supplier's capacity is either too low (below the lower threshold) or too high (above the higher threshold), there is no excess procurement as compared to the case when supplier has infinite capacity. When the supplier's capacity is between these two thresholds, the more powerful buyer purchases an excess amount in comparison to the infinite capacity case.     

舰炮身管的模态分析与多目标优化

舰炮的炮口扰动是影响舰炮射击精度的重要因素。为了减少舰炮的炮口扰动,优化身管结构,建立了柔性身管的ABAQUS有限元模型,将有限元模型的模态计算值与模态试验值进行比较,发现建立的柔性身管有限元模型是合理可行的。提出了混沌量子粒子群算法与动力学联合优化的方法,进行身管和炮口的多目标优化。优化结果表明,优化后炮口中心的线速度、角速度和角位移与优化前相比显著减小,身管质量有所降低,结构更加合理,该优化方法有效可行,为下一步全炮总体优化设计提供了一定的借鉴。     

基于非局部理论的黏弹性基体中压电纳米梁热-机电振动特性

基于非局部Euler梁理论和Hamilton原理建立黏弹性基体中压电纳米梁的热-机电振动特性分析模型。综合考虑非局部效应、压电效应、温度场、电场等复杂因素影响,推导出黏弹性基体中压电纳米梁振动特性分析的振动控制方程,并利用分布参数传递函数方法求解出一般边界条件下压电纳米梁的固有频率及相应振型。以锆钛酸铅压电陶瓷-4材料制成的某压电纳米梁为例,给出了四种典型边界条件下该压电纳米梁的前四阶固有频率,并系统分析了非局部效应、外部电压、温度载荷、黏弹性基体等因素对压电纳米梁热-机电振动特性的影响规律。分析结果表明:所建立的振动特性分析模型及其求解方法在分析黏弹性基体中压电纳米梁的热-机电振动特性问题中准确有效。     

参照化流形空间融合学习的敏感特征提取与异常检测方法

针对遥测振动信号冲击强、响应周期短、共振频带宽和小样本等特点导致异类模式识别率低的问题,提出基于参照化流形空间融合学习的敏感特征提取与异常检测方法。采用多尺度分析方法将信号正交无遗漏地分解到各尺度带中,提取多尺度特征构造高维特征集;以相同的正常信号样本结合相同类型的异常样本建立专属参照化模型单元,采用线性流形学习获取各参照化模型单元多尺度流形特征差异,增强异常特征的敏感性。融合各参照化模型单元的投影矩阵对原始特征集进行升维再学习,获取低维多尺度敏感流形特征;输入到分类器实现对未知样本状态辨识。实测信号处理结果验证了算法的有效性。     

舰空武器主要作战对象的特性及其模拟

了解主要作战对象的特性是舰空武器设计、试验必要的前提,也是空中靶标建设的关键,文章对此进行了归纳分析,提出了模拟这些特性的关键点,为舰空武器设计与试验、空中靶标设计与实现提供基本的结论。     

城市防空中目标优化分配的模糊聚类分析

定性和定量相结合,利用模糊聚类分析法确定目标的优先防护次序.先构造城市防空中需掩护的目标体系;再依据目标权重建立多因素模糊关系矩阵,导出等价矩阵;最后计算出基于给定参数λ的需防护目标的优先次序,得出目标分类聚类图.变模糊的、复杂的问题为直观的结论,为指挥员合理分配兵力兵器提供可靠的依据,从而最大限度地发挥防空兵器的作战效能.     

防空C3I系统作战效能评估

为了更好地认识防空C3I在现代防空作战中的作用,了解我军防空C3I的作战效能,立足我军防空C3I装备现状,根据其技术性能及作战使用方法,依托已有研究成果,采取新的研究思想,运用WSEIAC法评估了防空C3I的作战效能.这种评估思想紧贴防空作战的实际,最大限度地衡量了防空C3I在作战中的性能发挥程度,对今后进行深入的研究发展,具有一定的参考价值.     

地空导弹弹道仿真模型

地空导弹弹道仿真是地空导弹火力单元作战过程仿真的一个重要环节,仿真模型的合理性、算法的可行性、过程描述的正确性,直接影响防空作战仿真结果.从仿真的实际需要出发,给出不同引导方法下的弹道仿真模型、算法、过程描述及关键问题的解决方法,并通过实际应用验证了模型、算法的合理性、可行性和实用性.