The impact of component commonality on composite assembly policies

Assemble in Advance (AIA) policy reduces assembly cost due to advance planning, while Assemble to Order (ATO) policy eliminates assembly of excessive (more than demanded) units. The tradeoffs between the two policies have been studied in the past for single product environments. Moreover, it was shown that it is beneficial to employ AIA and ATO simultaneously. In this article, we study the employment of such a composite assembly policy in a multiproduct environment with component commonality. When common components are used, ATO may also enable us to benefit from the risk pooling effect. We provide important managerial insights such as: the multiperiod problem is myopic and changes in inventory levels due to the use of common components, and demonstrate the potential profit increase compared to other policies.© 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Optimal burn‐in procedure for periodically inspected systems

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we study burn‐in procedure for a system that is maintained under periodic inspection and perfect repair policy. Assuming that the underlying lifetime distribution of a system has an initially decreasing and/or eventually increasing failure rate function, we derive upper and lower bounds for the optimal burn‐in time, which maximizes the system availability. Furthermore, adopting an age replacement policy, we derive upper and lower bounds for the optimal age parameter of the replacement policy for each fixed burn‐in time and a uniform upper bound for the optimal burn‐in time given the age replacement policy. These results can be used to reduce the numerical work for determining both optimal burn‐in time and optimal replacement policy. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

采用神经网络技术降低机电设备BIT虚警

机电设备 Ｂ Ｉ Ｔ 的突出问题是虚警率高，重要原因之一是 Ｂ Ｉ Ｔ 系统传感器通路故障。本文选取神经网络技术进行传感器通路故障诊断，剖析某大型船舶动力装置机电设备 Ｂ Ｉ Ｔ 系统中传感器通路的故障机理和类型，得到其故障样本数据，经过神经网络学习训练后对实际系统进行故障诊断和识别，实验结果表明该方法简洁、有效，能够有效地诊断故障并识别出故障类型，具有实用价值。     

二相编码信号分段相关-视频积累检测的最优中频积累时间

载波多普勒下的二相编码连续波信号可以采用检波前中频积累加检波后视频积累的方法进行检测。本文对此方法进行了详细分析，提出了最优中频积累时间的选取准则。     

身管内弹道性能改变量的静态标定研究

目前国内外静态标定火炮身管内弹道性能改变量的方法,都存在着原理和精度不高的缺陷。采用多特征截面的标定方法可取得满意的精度,本文论述了其理论基础、精度及应用领域。     

2(1/2)谱在直升机声信号特征提取中的应用

介绍了四阶累积量对角切片的一种定义,分析了其傅里叶变换(212谱)在提取三次相位耦合特征方面的良好性能及其估计方法;将其应用于具有三次相位耦合的直升机声信号特征提取。仿真结果表明,利用该方法能够分析信号的三次相位耦合信息,且具有计算方法简单、运算速度快及良好的抑制高斯噪声的优点。实际的数据处理结果验证了该方法的有效性。     

Matrix-geometric solution of discrete time MAP/PH/1 priority queue

We use the matrix-geometric method to study the discrete time MAP/PH/1 priority queue with two types of jobs. Both preemptive and non-preemptive cases are considered. We show that the structure of the R matrix obtained by Miller for the Birth-Death system can be extended to our Quasi-Birth-Death case. For both preemptive and non-preemptive cases the distributions of the number of jobs of each type in the system are obtained and their waiting times are obtained for the non-preemptive. For the preemptive case we obtain the waiting time distribution for the high priority job and the distribution of the lower priority job's wait before it becomes the leading job of its priority class. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 23–50, 1998     

高超声速再入轨迹跟踪控制的微分变换方法

针对多约束条件下高超声速飞行器再入制导问题,提出一种基于微分变换法求解最优反馈控制的全状态标准轨迹跟踪制导律。利用滚动时域控制方法设计易于在线执行的闭环跟踪制导策略,在每个制导周期内将标准轨迹跟踪问题转化为线性时变系统状态调节器问题,并通过最优控制理论进一步转化为两点边值问题,采用微分变换法进行求解获得最优反馈控制律。数值仿真表明微分变换法的引入有效解决了传统两点边值问题求解的数值不稳定性与耗时问题,所设计的闭环制导律对状态偏差与模型不确定性具有较强的鲁棒性,可为工程设计提供有益参考。     

大气湍流引起的相位起伏对相干态量子雷达相位估计的影响

基于马赫曾德干涉仪模型并采用相位扩散主方程描述大气相位起伏效应对量子雷达的影响,给出了光场在相位扩散通道的演化过程,详细分析了大气相位起伏对相干态宇称探测量子雷达相位估计分辨率和最佳灵敏度的影响,并计算了大气相位起伏下相位估计灵敏度的Cramer-Rao极限。研究发现:相位起伏对于分辨率的影响可通过增加单个脉冲平均光子数来消除。在强相位起伏情况下,宇称探测得到最佳灵敏度会严重偏离散粒噪声极限,但是在弱相位起伏情况下,通过与Cramer-Rao极限的对比,发现宇称探测是一种准最佳探测方案。     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.