超短波信道建模方法

针对超短波信道传播条件复杂,缺乏相关成熟方法和模型的现状,对当前国内外现有超短波信道模型和建模方法进行了梳理、总结和归纳。简单介绍了超短波传播特性、信道参数以及现有模型,重点梳理了在不同应用场景下,可用于超短波信道建模的方法。然后,针对基于随机传播图理论的方法进行了重点介绍,总结了基于信道参数的模型验证方法。最后,针对不同的超短波应用条件,对相关的方法进行了展望。     

高空动能拦截器末制导导引方法设计与实现

以高空动能拦截器为研究对象,为其末制导段设计了一种“逐段限制视线转率”的导引方法,使之最终能直接命中目标,实现动能拦截的任务并通过仿真计算验证了该导引法的可行性。     

北斗RDSS系统新体制信号子载波间干扰产生机理与消除方法

为提高新一代北斗无线电测定卫星服务在有限带宽内的信息服务容量,借鉴了正交频分复用的理念,新体制无线电测定卫星服务信号设计采用多个子载波进行信号调制。以往针对多用户的分析主要考虑多址干扰,对载波频偏损耗和伪码损耗单独考虑,这不能解释新体制调制在相同的同步头的情况下其他子载波上信号在当前观测子载波上形成较大相关峰的问题,该问题对信号接收产生较大干扰。本文对该问题产生机理进行了分析,并提出了两种相关干扰的消除方法。     

Verification and validation of detonation modeling

The mathematical model used to describe the detonation multi-physics phenomenon is usually given by highly coupled nonlinear partial differential equations. Numerical simulation and the computer aided engineering (CAE) technique has become the third pillar of detonation research, along with theory and experiment, due to the detonation phenomenon is difficult to explain by the theoretical analysis, and the cost required to accredit the reliability of detonation products is very high, even some physical experiments of detonation are impossible. The numerical simulation technique can solve these complex problems in the real situation repeatedly and reduce the design cost and time stunningly. But the reliability of numerical simulation software and the serviceability of the computational result seriously hinders the extension, application and the self-restoration of the simulation software, restricts its independently innovational ability. This article deals with the physical modeling, numerical simulation, and software development of detonation in a unified way. Verification and validation and uncertainty quantification (V&V&UQ) is an important approach in ensuring the credibility of the modeling and simulation of detonation. V&V of detonation is based on our independently developed detonation multi-physics software-LAD2D. We propose the verification method based on mathematical theory and program function as well as availability of its program execution. Validation is executed by comparing with the experiment data. At last, we propose the future prospect of numerical simulation software and the CAE technique, and we also pay attention to the research direction of V&V&UQ.     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

无线通信及其干扰的建模与仿真研究

对无线通信及其干扰建模进行了分析和结构设计,重点研究了无线通信的天线、传播损耗、信噪比、误码率、纠错及通信干扰等主要模型,开发了仿真实例并进行了试验。结果表明：无线通信设备的战术技术性能、战场环境因素和通信干扰等对无线通信效果有极大的影响。     

稳态法测量热系数的计算方法改进研究

不良导体热系数测量普遍采用的是稳态法,但表面散热率的间接测量和样品侧面散热与漏热给测量带来一定误差,使得热系数实际测量值略微偏大。介绍了新的实验装置和实验数值计算方法,并且分析研究了样品边缘（侧面）热损失的物理模型,提出了新的数学模型和数据处理方法,纠正了这些偏差,与实验吻合较好。     

无线电引信多普勒信号光纤传输系统设计

论述一种光纤传输装置 ,适用于各型无线电引信杆试验多普勒信号传输。该系统采用光介质从电磁场中传递信号 ,克服了电缆传输对电磁场分布的影响 ,大大提高了无线电引信杆试验的精度。     

Optimal redesign decisions through failure rate estimates

To reduce the time-to-market of newly developed systems, manufacturers increasingly adopt strategies where systems are brought to market while system field reliability is still uncertain. These systems are typically sold under performance-based contracts, which incentivizes potential customers to invest in them despite reliability uncertainty. Such contracts make the manufacturer (partly) responsible for the availability of the system. Subsequently, when field reliability is lower than anticipated, the manufacturer may choose to redesign the system to avoid high contract penalties. Redesign is a costly effort which may substantially increase field reliability. Deciding when to redesign is challenging, especially because the initial failure rate estimate by the system's engineers is refined over time as failure data accrues. We propose a model that endogenizes the failure rate updating to analyze this tactical redesign decision. We study additive and multiplicative redesigns and show that the optimal policy has a control limit structure. We benchmark our optimal policy against a static counterpart numerically, and conclude that basing redesign decisions on the updated estimate of the failure rate can substantially reduce costs.     

在线学习的主用户仿冒攻击策略

在认知无线网络中,次用户通过频谱感知来学习频谱环境,从而接入那些没有被主用户占用的频谱空隙。事实上,多种恶意攻击的存在会影响次用户频谱感知的可靠性。只有深入研究恶意攻击策略,才能确保认知无线网络的安全。基于此,研究了一种认知无线网络中的欺骗性干扰策略,即主用户仿冒攻击策略,该攻击策略通过在信道上传输伪造的主用户信号来降低次用户频谱感知的性能。具体来说,将攻击策略问题建模为在线学习问题,并提出基于汤普森采样的攻击策略以实现在探索不确定信道和利用高性能信道间的权衡。仿真结果表明,与现有的攻击策略相比,提出的攻击策略能更好地通过在线学习优化攻击决策以适应非平稳的认知无线网络。