水下航行体惯性类水动力系数的计算方法

为了系统地计算水下航行体全套惯性类水动力系数,提高计算效率和计算精度,通过基于无粘模型的计算方法对水下航行体的运动进行了预报;通过UDF及动网格技术,对匀速运动和匀加速运动的SUBOFF模型进行了分析.设计了单方向速度线性变化的匀加速直线运动和匀加速回转运动,并通过换算和数值拟合处理得到了潜艇所受的惯性力和惯性类水动力系数.该系数与试验误差保证在6％之内,验证了所提方法的可行性及准确性.     

翼栅绕流流场数值模拟及动力性能研究

基于2D不可压缩定常流动的控制方程,对5个NACA4412非对称翼型组成的平面直列翼栅绕流流场进行了数值模拟,对比分析了同一翼型在翼栅中工作和单独绕流时的升、阻力情况,验证了翼栅装置工作的可行性,反映了翼栅绕流的客观规律性。结果表明:翼栅翼型头部流速和压力急剧变化,尾部出现流涡尾迹,前部是负压区,后部是正压区,内部流速大,压力小;在1/3弦长附近翼栅翼型表面压力出现拐点,拐点之前翼型上下表面压力差较大,拐点之后翼型上下表面压力差较小;翼栅内部流场具有相似、相近性,外部流场差异性较大;翼型的压力差是产生升力的主要原因。     

分形理论在装备保障组织设计中的应用研究

基于分形理论,提出了一种适应敏捷化要求的分形装备保障系统组织模型,能够通过快速的重构以响应战场环境的变化。阐明了其层次性、自相似、自组织和自优化的组织结构特点,分析了其运行模式。     

Scheduling a production–distribution system to optimize the tradeoff between delivery tardiness and distribution cost

We consider a make‐to‐order production–distribution system with one supplier and one or more customers. A set of orders with due dates needs to be processed by the supplier and delivered to the customers upon completion. The supplier can process one order at a time without preemption. Each customer is at a distinct location and only orders from the same customer can be batched together for delivery. Each delivery shipment has a capacity limit and incurs a distribution cost. The problem is to find a joint schedule of order processing at the supplier and order delivery from the supplier to the customers that optimizes an objective function involving the maximum delivery tardiness and the total distribution cost. We first study the solvability of various cases of the problem by either providing an efficient algorithm or proving the intractability of the problem. We then develop a fast heuristic for the general problem. We show that the heuristic is asymptotically optimal as the number of orders goes to infinity. We also evaluate the performance of the heuristic computationally by using lower bounds obtained by a column generation approach. Our results indicate that the heuristic is capable of generating near optimal solutions quickly. Finally, we study the value of production–distribution integration by comparing our integrated approach with two sequential approaches where scheduling decisions for order processing are made first, followed by order delivery decisions, with no or only partial integration of the two decisions. We show that in many cases, the integrated approach performs significantly better than the sequential approaches. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

Scheduling with centralized and decentralized batching policies in concurrent open shops

This article considers batch scheduling with centralized and decentralized decisions. The context of our study is concurrent open shop scheduling where the jobs are to be processed on a set of independent dedicated machines, which process designated operations of the jobs in batches. The batching policy across the machines can be centralized or decentralized. We study such scheduling problems with the objectives of minimizing the maximum lateness, weighted number of tardy jobs, and total weighted completion time, when the job sequence is determined in advance. We present polynomial time dynamic programming algorithms for some cases of these problems and pseudo‐polynomial time algorithms for some problems that are NP‐hard in the ordinary sense. © 2010 Wiley Periodicals, Inc. Naval Research Logistics 58: 17–27, 2011     

一种基于Petri网模型的系统动态安全性分析方法

针对目前安全分析方法通常只能给出导致系统失效的事件发生序列,而对系统运行过程中的一些时序、动态等因素考虑不足等问题,提出了基于Petri网模型的系统安全性动态分析方法,并结合系统状态可达树,建立了系统动态安全性分析模型,得出导致系统失效的所有可能事件的序列及其发生概率.最后,以实例验证了该方法的可靠性和有效性.     

捷联式惯导系统动态误差特性研究

根据载体运动状态下捷联惯性导航系统 (SINS)的误差方程时变的特点 ,推导出捷联惯性导航系统动态误差模型 ,并对其在几种动态环境下的误差特性进行了仿真研究 ,结果表明 :与静态误差特性相比 ,捷联式惯导系统的动态误差特性发生了较大的变化。     

弹道导弹威胁估计模型构建

简要分析了弹道导弹飞行3个阶段的不同特点及各阶段导弹预警探测手段的侧重点,结合威胁估计的特征构建了弹道导弹威胁估计模型结构框架,运用多阶段贝叶斯网络理论,构造了主动段、自由段和再入段威胁估计模型,并明确了三阶段间的转换时机。采用动态贝叶斯方法对弹道导弹作战全过程进行威胁估计仿真推理,仿真结果能够反映导弹在飞行过程中威胁程度的变化特点,为反导指挥员作出辅助决策提供智力支持。     

圆柱形容器爆炸焊接数值模拟与实验

针对深空探测采样容器的特殊要求,进行爆炸焊接严实密封技术研究。利用非线性动力学软件进行铝质柱形容器爆炸焊接数值模拟,得到各种焊接初始参数的影响规律,确定较佳焊接初始参数及容器结构尺寸,并进行实验验证。实验结果表明:外盖角度为7°时,1mm壁厚外盖配4mm壁厚内圆柱或2mm壁厚外盖配6mm壁厚内圆柱,配以较合适炸药厚度,密实焊接效果较理想。研究结果为深空探测采样容器结构设计提供了较好的参考。     

色空间对HDRI亮度测量方法的影响

相机内置预处理环节中的白平衡、色度空间转换是数码成像过程中的重要环节,sRGB和Adobe RGB是数码相机2种常用的色空间.为进一步研究色空间对HDRI亮度测量方法的影响,在荧光灯照明的实验室,分别利用sRGB和Adobe RGB色空间对色板成像,测量该亮度测量方法中各色板的标定因数,计算各色板标定因数的相对不确定度.实验结果表明:2种不同色空间获得的标定因数不同,且Adobe RGB色空间标定因数相对不确定度的平均值小于sRGB色空间的;色空间改变后,标定因数需要重新进行标定,且优先选用色域较宽的Adobe RGB色空间.