在柴油机放热曲线计算中两个关键问题的解决方法

对影响柴油机放热曲线精度计算的因素进行了讨论 ,并对影响放热率计算的主要问题如动态上止点修正、示功图光顺处理两个主要环节进行了分析研究 ,提出了解决方法 .     

基于XML的装备维修信息标准化

基于XML的装备维修信息标准化是我军装备信息保障的发展趋势.以设备技术说明书为例,对其进行了标准化信息分解,构建了相应的DTD和数据库结构,并讨论了实现标准化维修信息动态传输与交换的相关问题.     

部队作战效能综合评估法

高技术条件下局部战争的显著特点是参战单位多、对抗关系复杂、战争不确定因素增加,如何在此情况下客观评估部队的作战效能是作战研究领域一个重点和难点。通过综合运用定性分析法、网络分析法、战斗效能指数法、作战模拟及系统动力学等多种方法和理论,建立了一种可对部队作战效能进行评估的综合评估法。并以高技术条件下岛上进攻作战中装甲团的作战效能评估为例,详细介绍了该方法的实施过程,认为该综合评估法是行之有效的。     

航空轮胎用橡胶弹性体Mullins效应动态加载方法

航空轮胎用橡胶弹性体在服役过程中遭受严苛的动态循环工况。为了研究弹性体在此工况下的力学响应特征和损伤机理,提出基于应力波作用的Mullins效应动态加载实验方法。根据应力波传导与作用特征,采用Hopkinson压杆加载思路,设计和配置了各单元尺寸参数,进而搭建可用于橡胶弹性体材料动态循环加载的实验系统,并开展了航空轮胎用丁苯橡胶的动态循环加载试验。基于试验信号分析发现：加载系统实现了弹性体材料Mullins效应动态应变递增的试验加载。最后开展加载测试参数的影响因素分析,结果表明通过优化系统各单元可实现Mullins效应的动态加、卸载参数的控制。     

Scheduling maintenance and semiresumable jobs on a single machine

The majority of scheduling literature assumes that the machines are available at all times. In this paper, we study single machine scheduling problems where the machine maintenance must be performed within certain intervals and hence the machine is not available during the maintenance periods. We also assume that if a job is not processed to completion before the machine is stopped for maintenance, an additional setup is necessary when the processing is resumed. Our purpose is to schedule the maintenance and jobs to minimize some performance measures. The objective functions that we consider are minimizing the total weighted job completion times and minimizing the maximum lateness. In both cases, maintenance must be performed within a fixed period T, and the time for the maintenance is a decision variable. In this paper, we study two scenarios concerning the planning horizon. First, we show that, when the planning horizon is long in relation to T, the problem with either objective function is NP-complete, and we present pseudopolynomial time dynamic programming algorithms for both objective functions. In the second scenario, the planning horizon is short in relation to T. However, part of the period T may have elapsed before we schedule any jobs in this planning horizon, and the remaining time before the maintenance is shorter than the current planning horizon. Hence we must schedule one maintenance in this planning horizon. We show that the problem of minimizing the total weighted completion times in this scenario is NP-complete, while the shortest processing time (SPT) rule and the earliest due date (EDD) rule are optimal for the total completion time problem and the maximum lateness problem respectively. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 845–863, 1999     

基于车载GPS定位的固定目标坐标测量误差分析

通过分析地面移动侦察系统对固定目标进行一次坐标测量时的测量过程,建立了固定目标坐标测量模型。通过对测量过程中误差传递规律的分析,导出了目标坐标测量误差的分布规律。根据坐标测量误差中各组成成分的大小,将测量误差分布规律近似成正态分布,并给出了分布参数的简化计算方法。仿真结果证实了误差分布规律近似及参数计算简化的可行性。     

A comparative study of three tool replacement/operation sequencing strategies in a flexible manufacturing system

This paper studies three tool replacement/operation sequencing strategies for a flexible manufacturing system over a finite time horizon: (1) failure replacement—replace the tool only upon failure, (2) optimal preventive tool replacement for a fixed sequence of operations, and (3) joint scheduling of the optimal preventive tool replacement times and the optimal sequence of operations. Stochastic dynamic decision models are used for strategies 2 and 3. The optimization criterion for strategies 2 and 3 is the minimization of the total expected cost over the finite time horizon. We will show through numerical studies that, with the same amount of information, the total expected costs can be reduced considerably by choosing an optimal strategy. Our conclusion is that in flexible manufacturing, optimal tool replacement and optimal operations sequencing are not separate issues. They should be considered jointly to minimize the expected total cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 479–499, 2000     

弹炮混编防空群兵力分配模型

针对对付现代日益发展的空袭手段的一种有效方法--弹炮混编防空布势中存在的防空武器种类繁多,兵力分配复杂,难以充分发挥各自效能的问题,建立了非线性规划模型,利用动态规划对该模型进行分析,运用拉格朗日降维法进行降维,将三维降为二维.经防空作战的实例验证该算法不但能将两维降到单维,而且还可以将多维降到单维,能节省计算机的内存使用率,提高仿真计算的速度,符合信息化条件下指挥决策实时化的要求且分配效果较好.     

陀螺随机漂移误差模型建模方法研究

论述了自60年代以来的几种主要陀螺仪漂移误差模型建模的方法,介绍了各种方法的特点及建模公式,有助于惯导系统中陀螺漂移误差模型的建立．     

外槽轮机构分度精度分析与设计

分析了外槽轮机构主要零部件的设计精度对槽轮分度精度的影响 ,结果表明主动件长度和滚子与轮槽之间的间隙对分度精度影响最大。用概率与数理统计的方法导出了精度设计公式并给出一个计算实例