救生伞背带分系统对假人动载的影响

为了改善救生伞背带分系统的安全性,建立降落伞-背带-假人系统的动力学模型,分析背带及脱离锁参数对假人质心过载的影响。针对救生伞假人高速开伞空投试验,采用多体动力学方法建立降落伞、背带脱离锁和假人的十五自由度动力学模型;采用半质量-阻尼弹簧模型建立背带模型,连接降落伞、脱离锁和假人;利用实测过载计算降落伞开伞力。利用所建立的动力学模型仿真典型状态下假人和背带的动力学响应,验证所建立模型的合理性。分析了脱离锁位置、背带松紧程度、背带材料特性对假人质心最大过载的影响,可用于指导背带设计以及确定最佳的背带脱离锁位置。     

基于规则的动态频谱接入研究

动态频谱接入面临的关键技术之一是对接入时机和方式进行有效地管控,防止由于频谱的接入使用过于灵活造成用频的干扰和混乱。将频谱接入的时间和方式给予规则上的约束和指导,基于规则构建动态频谱管理框架可以有效实现频谱的实时管控。对动态频谱接入的规则及表述方式进行了讨论,分析了基于规则的动态频谱接入过程,最后结合美军XG项目的试验结果分析了基于规则的动态频谱接入的应用前景。     

一种改进的量子粒子群算法

量子粒子群算法是将量子计算与粒子群算法相结合的一种新的优化方法。首先利用相位角进行实数编码,将动态量子旋转门引入到粒子群算法中,采用自适应变异,提出了一种改进的量子粒子群算法。然后运用Pe-nalized函数和Ackley函数测试了该算法的性能。最后将该算法应用到武器目标分配模型中,获得了最优的分配方案。仿真研究表明,该算法具有收敛速度快、搜索能力强和稳定性高的特点。     

基于自适应EKF的高动态载波跟踪算法

针对载波跟踪算法在大频偏或动态剧烈变化时易失锁的问题,提出一种无数据辅助情况下基于自适应R/Q扩展卡尔曼滤波(AEKF)的高动态载波跟踪算法。该算法在AEKF代替鉴相器和滤波器的环路结构基础上,引入两倍相位转换来消除数据位跳变的影响,并利用载噪比估计方法和基于加加速度的信号动态监测方法来修正观测噪声协方差(R)和系统状态噪声方差(Q),进而兼顾环路的跟踪精度和动态稳定性。实验结果表明:利用该算法的GPS软件接收机能够在加速度200 g,瞬间加加速度10 000 g/s的动态指标下正常工作。     

引入电流变化率的电源分布网络最差噪声分析算法

随着时钟频率的增加以及电源电压的降低,电源完整性问题日益凸显。将电流变化率加入到最差噪声算法的电流约束中,能够在任意电流变化率的情况下分析电源分布网络的最差噪声,从而获得更加真实的最差噪声。另外,利用改进的Knuth-Yao四边形不等式法对基于动态规划的最差噪声算法进行加速,加速后算法的时间复杂度从O(n~2m)降为O(mnlogn)。     

Parallel machine scheduling with batch deliveries to minimize total flow time and delivery cost

Motivated by the flow of products in the iron and steel industry, we study an identical and parallel machine scheduling problem with batch deliveries, where jobs finished on the parallel machines are delivered to customers in batches. Each delivery batch has a capacity and incurs a cost. The objective is to find a coordinated production and delivery schedule that minimizes the total flow time of jobs plus the total delivery cost. This problem is an extension of the problem considered by Hall and Potts, Ann Oper Res 135 (2005) 41–64, who studied a two‐machine problem with an unbounded number of transporters and unbounded delivery capacity. We first provide a dynamic programming algorithm to solve a special case with a given job assignment to the machines. A heuristic algorithm is then presented for the general problem, and its worst‐case performance ratio is analyzed. The computational results show that the heuristic algorithm can generate near‐optimal solutions. Finally, we offer a fully polynomial‐time approximation scheme for a fixed number of machines. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 492–502, 2016     

利用实际飞行数据插值的INS/GNSS组合导航仿真轨迹发生器

针对INS/GNSS组合导航仿真中捷联惯导系统陀螺、加速度计信号高精度模拟问题,提出基于实际飞行数据插值的动态轨迹解析生成仿真算法。对转换到地心惯性坐标系中的载体姿态、位置和重力场数据进行关于时间的样条函数插值,得到载体坐标系下陀螺角速率、角增量以及加速度计比力积分增量的高精度分段解析表达式。使生成的陀螺、加速度计信号符合载体运动学和动力学特性,反映杆臂效应影响,同时与经事后处理的实测GNSS伪距、伪距率等数据特征保持一致。提出四元数约束插值算法,其可满足四元数解析插值时范数为1的约束限制条件。基于某实际无人机飞行数据,验证了所提算法的有效性,其完全满足组合导航动态仿真精度要求。该算法也适用于其他高精度高动态导航系统和刚体运动控制仿真中的角运动、线运动传感器信号模拟。     

The mechanical performance and a rate-dependent constitutive model for Al3Ti compound

The Al₃Ti compound has potential application in the high temperature structure materials due to its low density, high strength and stiffness. The mechanical behaviors of the material under different loading rates were studied using compression tests. The results indicate that Al₃Ti is a typical brittle material and its compressive strength is dependent on the strain rate. Therefore, a series of rate-dependent constitutive equations are needed to describe its mechanical behaviors accurately. However, it is still short of professional research on the material model for Al₃Ti. In this study, the material model was developed on the basis of JH-2 constitutive equations using the experimental data. The model was then applied in simulating the impact process of Ti/Al₃Ti metal-intermetallic laminate composites so as to validate the established model. Good agreement between simulation and experiment results shows the constitutive model predict the material responses under high rate and large deformation accurately. This work provides more support for the theoretical and numerical research on the intermetallic.     

中子增殖研究

导出了一个新的中子增殖公式,公式简明,计算量小.经与传统的增殖公式进行比较,后者由于未考虑缓发中子效应,只能用于定性分析.新导出的中子增殖公式较精确地描述了中子的增殖过程,可用于定量计算与分析.     

基于模糊时间序列的时变动态系统模糊建模

要想建立结构不确定、参数时变的动态系统的模型是很困难的。改进了Song Chisson的模糊时间序列方法,并成功应用于时变动态系统的辨识与建模和自适应控制。仿真结果表明该方法计算量小,实时性好,能很快地跟踪系统的变化。