随动定向战斗部破片飞散特性研究

针对防空导弹常规破片式杀伤战斗部使用中存在能量利用率低的缺陷,提出采用随动定向战斗部的观点。建立随动定向战斗部的破片动态飞散区和飞散速度的计算模型,采用数值解析方法,解决在复杂弹目交会条件下破片的飞散区域与打击速度的计算问题．并用MATLAB软件对建立的模型进行验证,得出仿真结果与实际结果一致,这表明模型是合理、正确的。     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

Equity in genetic newborn screening

State‐level newborn screening allows for early treatment of genetic disorders, which can substantially improve health outcomes for newborns. As the cost of genetic testing decreases, it is becoming an essential part of newborn screening. A genetic disorder can be caused by many mutation variants; therefore, an important decision is to determine which variants to search for (ie, the panel design), under a testing budget. The frequency of variants that cause a disorder and the incidence of the disorder vary by racial/ethnic group. Consequently, it is important to consider equity issues in panel design, so as to reduce disparities among different groups. We study the panel design problem using cystic fibrosis (CF) as a model disorder, considering the trade‐offs between equity and accuracy, under a limited budget. Most states use a genetic test in their CF screening protocol, but panel designs vary, and, due to cost, no state's panel includes all CF‐causing variants. We develop models that design equitable genetic testing panels, and compare them with panels that maximize sensitivity in the general population. Our case study, based on realistic CF data, highlights the value of equitable panels and provides important insight for newborn screening practices.     

Damage modeling of ballistic penetration and impact behavior of concrete panel under low and high velocities

This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete panels. This paper is divided into two parts. The first part consists of numerical modeling of reinforced concrete panel penetrated with a spherical projectile using concrete damage plasticity (CDP) model, while the second part focuses on the comparison of CDP model and Johnson-Holmquist-2 (JH-2) damage model and their ability to describe the behavior of concrete panel under impact loads. The first and second concrete panels have dimensions of 1500 mm × 1500 mm × 150 mm and 675 mm × 675 mm × 200 mm, respectively, and are meshed using 8-node hexahedron solid elements. The impact object used in the first part is a spherical projectile of 150 mm diameter, while in the second part steel projectile of a length of 152 mm is modeled as rigid element. Failure and scabbing characteristics are studied in the first part. In the second part, the com-parison results are presented as damage contours, kinetic energy of projectile and internal energy of the concrete. The results revealed a severe fracture of the panel and high kinetic energy of the projectile using CDP model comparing to the JH-2 model. In addition, the internal energy of concrete using CDP model was found to be less comparing to the JH-2 model.     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.     

双离合器自动变速系统动力学建模及仿真研究

在分析双离合器自动变速器的典型结构及工作原理的基础上,利用面向对象的图形化系统仿真分析软件EASY5,建立了典型湿式双离合器动力换挡的自动变速器及其控制系统的动力学模型,并与采用传统的手动变速系统的车辆对比, 进行了加速性能的仿真分析,研究了车辆换挡过渡过程中影响换挡品质的主要因素及其改进措施。为这种新型的自动变速器在我国的推广和应用研究提供了一些基本的理论依据。     

基于响应面法的悬架系统优化研究

提出了应用响应面分析履带车辆悬架系统特性的方法。构建了悬架系统特性参数和整车行驶平顺性及可靠性之间的二阶响应面模型,并依据响应面分析结果,进行悬架系统的优化研究。优化结果表明了该方法的有效性。     

超级电容起动动态过程分析与建模仿真

为了改进装甲车辆起动性能,提出了用超级电容替代蓄电池起动的方案。介绍了超级电容的特性,建立了起动系统模型并进行了仿真研究,对仿真结果进行了实验验证。结果表明:仿真与实验的结论基本吻合,显示了该方案的可行性。     

某供弹机构现存问题动力学分析及参数优化探讨

介绍了环形杠杆供弹机构的工作原理及其在实际使用中常见的问题,建立了机构的动力学模型,对模型进行动态求解,模拟了机构的工作过程。借助求解结果,针对问题产生的原因进行了动力学分析,在理论上找到了问题产生的根源。在此基础上建立了机构的最优化数学模型,给出了优化方案,最后对优化方案和现有结构进行了比较。     

基于有限元模型的机枪结构动态特性仿真

在对机枪进行结构设计时,了解机枪的固有频率和射击载荷作用下的动态响应特性对整个武器射击精度的影响十分必要。利用有限元分析软件对某机枪模型进行模态仿真分析,进而得出该武器对射击精度影响较大的部件。同时对机枪在射击载荷作用下的动力响应特性进行仿真计算,阐述了在机枪结构设计时频率匹配、射向一致的必要性,为机枪结构动力修改提供了理论依据。