电传动装甲车辆负载功率预测实时能量管理策略

针对电传动装甲车辆负载功率预测功能缺失导致控制作用滞后的问题,提出一种具有较高负载功率预测精度的实时能量管理策略。在分析整车结构的基础上,采用理论分析和数据拟合方法,建立各动力源数学模型。将差分自回归移动平均模型和自适应马尔可夫链两种预测方法相结合,设计非平稳趋势性负载功率组合预测方法。在非线性模型预测控制框架下,构建多目标优化函数,采用序列二次规划法在有限时域内实时求解最优控制指令,优化多动力源协调控制过程。依托硬件在环仿真平台进行多路面行驶实验,对比有无功率预测的能量管理控制效果。结果表明,改进的实时能量管理策略对未来负载功率具有较好的预见性,能够显著优化多动力源协调控制过程,提升车辆燃油经济性,稳定母线电压和电池荷电状态,对传统模型预测控制下的工程应用场景具有一定借鉴意义。     

Shock initiation performance of NTO-based polymer bonded explosive

3-nitro-1,2,4-tri-azol-5-one (NTO) is a high energy insensitive explosive. To study the shock initiation process of NTO-based polymer bonded explosive JEOL-1 (32%octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), 32% NTO, 28% Al and 8% binder system), the cylinder test, the gap experiments and numerical simulation were carried out. Firstly, we got the detonation velocity (7746 m/s) and the parameters of Jones-Wilkins-Lee (JWL) equation of state (EOS) for detonation product by cylinder test and numerical simulation. Secondly, the Hugoniot curve of unreacted explosive for JEOL-1 was obtained calculating the data of pressure and time at different Lagrangian positions. Then the JWL EOS of unreacted explosive was obtained by utilizing the Hugoniot curve as the reference curve. Finally, we got the pressure growth history of JEOL-1 under shock wave stimulation and the parameters of the ignition and growth reaction rate equation were obtained by the pressure-time curves measured by the shock-initiation gap experiment and numerical simulation. The determined trinomial ignition and growth model (IG model) parameters can be applied to subsequently simulation analysis and design of insensitive ammunition with NTO-based polymer bonded explosive.     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.     

漂浮式微型波力发电装置传动系统的速度分析与调节

针对边防驻岛官兵用电难的问题,结合海洋波浪能特点,提出了一种新型漂浮式微型波力发电装置。基于装置结构模型,分析了其结构特征和工作原理;建立了传动系统的运动学模型,分析了其运动特性和速度调节性能;进行算例分析,验证了理论模型的正确性。研究表明：双侧传动轮系输入系统优于单侧传动轮系输入系统;改变飞轮的转动惯量,可以调节速度的波动。分析结果为该装置的后续试验研究提供了理论依据。     

水雾扩散模型仿真

建立水雾红外衰减模型时,通常把水雾空间看作单一均匀整体处理,然而雾滴的扩散现象使水雾的雾滴密度无法保证处处相等,所以仿真结果与实际情况相比普遍存在较大偏差。针对这一问题,基于高斯扩散理论与Mie散射理论,提出了一种新的建模方案。通过将水雾空间划分为多个子空间,并计算每个子空间内水雾消光性能的建模方法,提高建模的准确性。同时结合红外制导导弹来袭的方向变化,计算出不同方向上的水雾消光性能。从仿真结果可以看出,这种建模方式能够很好地克服以往建模方法的缺陷,为探索水雾的精确建模提供了一种新思路。     

Numerical simulation of the natural fragmentation of explosively loaded thick walled cylinders

The ability to predict the natural fragmentation of an explosively loaded metal casing would represent a significant achievement. Physically-based material models permit the use of small scale laboratory tests to characterise and validate their parameters. The model can then be directly employed to understand and design the system of interest and identify the experiments required for validation of the predictions across a wide area of the performance space. This is fundamentally different to the use of phenomenologically based material algorithms which require a much wider range of characterisation and validation tests to be able to predict a reduced area of the performance space. Eulerians numerical simulation methods are used to describe the fragmentation of thick walled EN24 steel cylinders filled with PBXN-109 explosive. The methodology to characterise the constitutive response of the material using the physically based Armstrong–Zerilli constitutive model and the Goldthorpe path dependent fracture model is described, and the results are presented. The ability of an Eulerian hydrocode to describe the fragmentation process and reproduce the experimentally observed fragment mass and velocity distributions is presented and discussed. Finally the suitability of the current experimental analysis methodology for simulation validation is addressed.     

Numerical simulation of base flow with hot base bleed for two jet models

In order to improve the benefits of base bleed in base flow field, the base flow with hot base bleed for two jet models is studied. Two-dimensional axisymmetric Navier–Stokes equations are computed by using a finite volume scheme. The base flow of a cylinder afterbody with base bleed is simulated. The simulation results are validated with the experimental data, and the experimental results are well reproduced. On this basis, the base flow fields with base bleed for a circular jet model and an annulus jet model are investigated by selecting the injection temperature from 830 K to 2200 K. The results show that the base pressure of the annular jet model is higher than that of the circular jet model with the changes of the injection parameter and the injection temperature. For the circular jet model, the hot gases are concentrated in the vicinity of the base. For the annular jet model, the bleed gases flow into the shear layer directly so that the hot gases are concentrated in the shear layer. The latter temperature distribution is better for the increase of base pressure.     

Neural network modeling to evaluate the dynamic flow stress of high strength armor steels under high strain rate compression

An artificial neural network (ANN) constitutive model is developed for high strength armor steel tempered at 500 °C, 600 °C and 650 °C based on high strain rate data generated from split Hopkinson pressure bar (SHPB) experiments. A new neural network configuration consisting of both training and validation is effectively employed to predict flow stress. Tempering temperature, strain rate and strain are considered as inputs, whereas flow stress is taken as output of the neural network. A comparative study on Johnson–Cook (J–C) model and neural network model is performed. It was observed that the developed neural network model could predict flow stress under various strain rates and tempering temperatures. The experimental stress–strain data obtained from high strain rate compression tests using SHPB, over a range of tempering temperatures (500–650 °C), strains (0.05–0.2) and strain rates (1000–5500/s) are employed to formulate J–C model to predict the high strain rate deformation behavior of high strength armor steels. The J-C model and the back-propagation ANN model were developed to predict the high strain rate deformation behavior of high strength armor steel and their predictability is evaluated in terms of correlation coefficient (R) and average absolute relative error (AARE). R and AARE for the J–C model are found to be 0.7461 and 27.624%, respectively, while R and AARE for the ANN model are 0.9995 and 2.58%, respectively. It was observed that the predictions by ANN model are in consistence with the experimental data for all tempering temperatures.     

云模型在雷达干扰资源多目标优化配置中的应用

鉴于干扰效果/效益评估在雷达干扰资源优化分配中的重要地位,提出了一种基于云模型和匈牙利算法的雷达干扰资源优化分配模型。利用一维云模型单条件单规则发生器和逆向云发生器构建了评估指标干扰效果推理器,利用基于风险态度因子的云模型映射函数定义了云模型之间距离的度量方法。提出了一种基于云模型与逼近理想解法的雷达干扰效益矩阵求解方法,最后运用匈牙利算法实现了干扰资源优化分配。将所建模型应用到干扰资源分配中,结果表明该模型能够较好的处理评估中的不确定性知识,是合理、可行的。     

基于MDFT框架的海上能源通道航线动态决策建模与仿真

针对常规海上航线决策没有考虑决策选择过程的问题,引入多选择决策场理论（ MDFT）,构建了海上能源通道航线动态决策模型。基于信息完备、信息不确定和特殊情况等三种情景想定,进行了海上能源通道航线规划决策及其实验仿真。结果表明,决策过程受时间压力和信息质量的制约,时间压力会制约决策质量,同时还可能引起“偏好逆转”现象,信息不确定也会导致确定性决策。该模型不仅综合考虑了海上能源通道航线选择时需关注的各类要素,且模型参数可动态调整,进而能合理模拟真实的海上状况和决策过程。