直升机工作特性建模与飞行性能仿真

以涡轮轴发动机工作特性建模为中心,对某系列直升机飞行性能进行仿真研究,力争实现对直升机实施"基于状态的维修"。讨论了直升机飞行性能和涡轮轴发动机特性的表述方法,建立了涡轮轴发动机的数学模型,并讨论了其解法与应用。基于发动机台架性能仿真程序对该模型进行简化,得到涡轮轴发动机工作过程的热力学模型。对发动机性能进行计算完成飞行性能仿真,应用结果表明该方法是可信、高效的。     

康特洛维奇的数值方法在矩形薄板横向弯曲振动中的应用

本文提出的解决矩形薄板弯曲振动问题的康特洛维奇的数值方法,大大减少了所需要的计算机内存。通过算例表明它具有比较高的计算精度和计算速度,是一种有前途的计算方法。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.     

Scheduling maintenance and semiresumable jobs on a single machine

The majority of scheduling literature assumes that the machines are available at all times. In this paper, we study single machine scheduling problems where the machine maintenance must be performed within certain intervals and hence the machine is not available during the maintenance periods. We also assume that if a job is not processed to completion before the machine is stopped for maintenance, an additional setup is necessary when the processing is resumed. Our purpose is to schedule the maintenance and jobs to minimize some performance measures. The objective functions that we consider are minimizing the total weighted job completion times and minimizing the maximum lateness. In both cases, maintenance must be performed within a fixed period T, and the time for the maintenance is a decision variable. In this paper, we study two scenarios concerning the planning horizon. First, we show that, when the planning horizon is long in relation to T, the problem with either objective function is NP-complete, and we present pseudopolynomial time dynamic programming algorithms for both objective functions. In the second scenario, the planning horizon is short in relation to T. However, part of the period T may have elapsed before we schedule any jobs in this planning horizon, and the remaining time before the maintenance is shorter than the current planning horizon. Hence we must schedule one maintenance in this planning horizon. We show that the problem of minimizing the total weighted completion times in this scenario is NP-complete, while the shortest processing time (SPT) rule and the earliest due date (EDD) rule are optimal for the total completion time problem and the maximum lateness problem respectively. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 845–863, 1999     

航空轮胎用橡胶弹性体Mullins效应动态加载方法

航空轮胎用橡胶弹性体在服役过程中遭受严苛的动态循环工况。为了研究弹性体在此工况下的力学响应特征和损伤机理,提出基于应力波作用的Mullins效应动态加载实验方法。根据应力波传导与作用特征,采用Hopkinson压杆加载思路,设计和配置了各单元尺寸参数,进而搭建可用于橡胶弹性体材料动态循环加载的实验系统,并开展了航空轮胎用丁苯橡胶的动态循环加载试验。基于试验信号分析发现：加载系统实现了弹性体材料Mullins效应动态应变递增的试验加载。最后开展加载测试参数的影响因素分析,结果表明通过优化系统各单元可实现Mullins效应的动态加、卸载参数的控制。     

CRF与规则相结合的军事命名实体识别研究

作战命令的分词是作战指令自动化生成、文图转换等各种指挥自动化技术的重要基础。在作战指令进行分词处理的过程中,军事命名实体的识别是技术难点之一。命名实体是信息的主要载体,它的识别是军事信息抽取的关键。提出了一种基于CRF模型与规则相结合的命名实体识别方法,结合基本特征与外部词典特征,提高了实体识别效率;在后期进行规则优化,最终实现高效的命名实体识别。实验证明,该方法是行之有效的。能够成功解决命名实体的自动识别问题。     

Optimal nonmyopic gambling strategy for the generalized Kelly criterion

We consider the optimal wagers to be made by a gambler who starts with a given initial wealth. The gambler faces a sequence of two-outcome games, i.e., “win” vs. “lose,” and wishes to maximize the expected value of his terminal utility. It has been shown by Kelly, Bellman, and others that if the terminal utility is of the form log x, where x is the terminal wealth, then the optimal policy is myopic, i.e., the optimal wager is always to bet a constant fraction of the wealth provided that the probability of winning exceeds the probability of losing. In this paper we provide a critique of the simple logarithmic assumption for the utility of terminal wealth and solve the problem with a more general utility function. We show that in the general case, the optimal policy is not myopic, and we provide analytic expressions for optimal wager decisions in terms of the problem parameters. We also provide conditions under which the optimal policy reduces to the simple myopic case. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 639–654, 1997     

Variable sampling plans for normal distribution indexed by Taguchi's loss function

Taguchi has presented an approach to quality improvement in which reduction of deviation from the target value is the guiding principle. In this approach any measured value x of a product characteristic X brings a loss to consumer in general, where the loss is expressed as a quadratic form with respect to the difference between the measured value x and the target value T of a product characteristic. Then, it is natural to reject the lot which may bring a large loss to consumer. This concept induces us to construct new variable sampling plans based on the Taguchi's loss criterion. In this article, a design procedure of the sampling plans for assuring the loss in the Taguchi's method is proposed. Some numerical results based on the proposed design procedures are illustrated. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 591–603 (1997)     

基于XML的装备维修信息标准化

基于XML的装备维修信息标准化是我军装备信息保障的发展趋势.以设备技术说明书为例,对其进行了标准化信息分解,构建了相应的DTD和数据库结构,并讨论了实现标准化维修信息动态传输与交换的相关问题.