一类具免疫时滞的HIV模型的动力学性态分析

研究一类具有时滞和免疫反应的HIV模型。首先通过分析特征方程研究了平衡点的局部稳定性以及Hopf分支的存在性。然后利用规范型理论和中心流行理论得到了确定Hopf分支方向和分支周期解稳定性的计算公式。接着讨论了无病平衡点的全局稳定性。最后通过数值模拟说明了所得理论结果。     

基于网络分析法的弹药生产响应能力影响因素

针对未来战场对弹药需求动态、突发、受任务冲击影响等特点,提出弹药生产响应能力概念,建立了任务冲击条件下弹药生产响应能力影响因素的指标体系。运用网络分析法,建立典型结构的弹药生产响应能力影响因素的网络模型,得出弹药生产响应能力的关键影响因素,为弹药生产响应能力分析与提高提供了科学研究方法。     

车用再制造发动机验收检验台架磨合规范试验研究

对未经磨合的再制造发动机新品进行动力性能试验,试验结果与原机标准相差较大,经分析后认为未进行充分磨合是性能不达标的主要原因。针对再制造发动机的出厂验收技术特点,制定了小负荷循环磨合规范,并对起初推断进行了试验验证。根据磨合过程中发动机动力性能的变化规律,通过试验对磨合规范进行了优化,总结出了快速有效的台架磨合规范。试验结果表明：快速磨合规范不仅能够提高磨合效率,而且保证了磨合效果。     

磁流变阻尼器响应时间仿真与试验研究

响应时间是磁流变阻尼器（Magnetorheological Damper,MRD）重要性能指标之一。为分析MRD响应时间及影响因素,建立了MRD动态响应模型,提出了一种基于Ansoft和Adams联合仿真分析MRD响应时间的方法,并通过仿真与试验相结合的方法分析了阶跃电流幅值、活塞运动速度以及系统刚度等因素对MRD响应时间的影响。仿真结果和试验数据表明：MRD响应时间随活塞速度和系统刚度的增大呈减小趋势,随阶跃电流幅值的升高呈增大趋势。同时证明通过联合仿真分析MRD响应时间和影响因素的方法是有效的。     

基于虚拟样机技术的某小口径火炮射击仿真分析

针对某小口径火炮在射击过程中零部件运动特性难以通过实弹射击试验获取的难题,联合三维建模软件和动力学仿真软件,建立了该炮的动力学模型。通过仿真数据与实弹射击试验数据的对比,验证了模型的有效性。在此基础上,研究了该炮在射击循环中各部件的运动规律和承受的发射应力载荷,研究结果可为该炮关键零部件的疲劳寿命分析和火炮射击精度研究提供参考。     

5GHz雷达的干扰计算模型概述

文章从开发5 GHz模型的目的入手,简要介绍了5 GHz模型的结构组成,详细讨论了5 GHz模型的干扰计算流程,包括无线局域网和雷达的场景设置、技术参数设置、总干扰计算等,最后给出了5 GHz模型的一个运行范例,以期为其它干扰模型的开发提供借鉴参考。     

Force chains based mesoscale simulation on the dynamic response of Al-PTFE granular composites

Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminum-polytetrafluoroethylene (Al-PTFE) granular composites under a low-velocity impact. A two-dimensional model followed the randomly normal distribution of real Al particles size is developed. The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments. The results indicate that, force chains behavior governed by the number and the size of agglomerated Al particles, significantly affects the impact response of the material. The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density. A high crack area of the material is critical mechanism to arouse the initiation re-action. The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance. In addition, simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials. It is found that smaller sized Al particle of com-posites are more preferred than its bulky material in ultimate strength. Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number. The simulation studies provide further insights into the plastic deformation, failure mechanism, and possible energy release capacity for Al-PTFE composites, which is helpful for further design and application of reactive materials.     

Influences of different crossing types on dynamic response of underground cavern subjected to ground shock

An intersecting cavern is a common structural form used in underground engineering, and its safety and stability performance directly control the service performance of the whole project. The dynamic re-sponses of the three kinds of crossing type (+-shaped, T-shaped, L-shaped) caverns subjected to ground shock were studied by numerical simulation. The velocity plus force mode boundary setting method was proposed in the coupled static and dynamic analysis of a deep underground cavern. The results show that, among the three types of crossing caverns, the+-shaped cavern is the most significantly affected by the dynamic action, followed by T-shaped, and then L-shaped caverns. The vault settlement, straight wall deformation, vault peak particle velocity, effective plastic strain of surrounding rock, and maximum principal stress and strain at the bottom of the lining of the straight wall increase with the increase of cavern span. The vault settlement, straight wall deformation, effective plastic strain of surrounding rock, and the maximum principal stress and strain at the bottom of lining to the straight wall decrease with the increase of lateral pressure coefficient, and the peak particle velocity at the vault increases. The variation is small compared with the change of cavern span. The influence range of the underground cavern intersection is two cavern diameters from the intersection centre. The bottom of the straight wall at the intersection is the weak part. It is suggested to thicken the support locally to improve the stability of the cavern.     

发动机动态特性及其对车辆换档特性的影响

分析了影响发动机动态特性的因素,并通过试验得出了动态特性与稳态特性的关系。根据试验结果,分析了动态特性对车辆换档特性的影响,得出按发动机动态特性设计换档规律,有利于车辆换档特性的改善。     

大口径机枪结构动力学建模方法研究

总结了我国近年来关于大口径机枪结构动力学建模方法研究的主要成果,分析了目前建模方法上存在的某些问题以及对武器装备研制的影响,进一步介绍了边界条件的确定、模型正确性判别和载荷识别等方面的新技术。