Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.     

星载SAR对舰船高分辨成像研究

研究了星载SAR对舰船高分辨成像的难度和方法。在星载SAR舰船数据获取模型的基础上,着重分析了舰船航行以及船体在特定海情时三维转动对星载SAR成像的影响,研究了星载SAR舰船数据的ISAR成像方法,并给出成像算法流程,仿真结果验证了该方法的有效性。     

舰船动态消磁方法初步研究

传统消磁方法存在舰船系留时间长、机动性和隐蔽性差等弊端,舰船动态消磁法是解决这些弊端的有效手段。其基本思想是:使舰船慢速通过由平铺在海底的组合式消磁线圈所产生的磁场空间,从而达到在运动中消磁的目的。模型实验证明,动态消磁法能够在很短的时间内使舰船磁场得到明显的改善。     

基于动态神经网络的装备技术状态预测模型

装备的技术状态受多种因素的影响,诸多影响因素之间是一种多变量、强耦合、非线性的关系,同时这种关系还是动态的。根据装备技术状态的特性,使其在相空间里重构,然后利用动态神经网络建立装备技术状态预测模型,并以装备振动信号预测为例进行案例研究,验证了利用动态神经网络进行预测的可行性和优越性。     

Integrated capacity,demand, and production planning with subcontracting and overtime options

Models for integrated production and demand planning decisions can serve to improve a producer's ability to effectively match demand requirements with production capabilities. In contexts with price‐sensitive demands, economies of scale in production, and multiple capacity options, such integrated planning problems can quickly become complex. To address these complexities, this paper provides profit‐maximizing production planning models for determining optimal demand and internal production capacity levels under price‐sensitive deterministic demands, with subcontracting and overtime options. The models determine a producer's optimal price, production, inventory, subcontracting, overtime, and internal capacity levels, while accounting for production economies of scale and capacity costs through concave cost functions. We use polyhedral properties and dynamic programming techniques to provide polynomial‐time solution approaches for obtaining an optimal solution for this class of problems when the internal capacity level is time‐invariant. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

SCB型钢结构防火涂料热分解动力学模型研究

用热重法(TG)对SCB型钢结构防火涂料的热分解过程进行了分析,并用微分法中的Achar法对热分解的数据进行处理,用多种机理方程进行了拟合,发现SCB型防火涂料的热分解可分为四个阶段:第一阶段热分解属于随机核化,第二、第三、第四阶段热分解属于三维扩散,球形对称机理。     

基于时间序无圈有向图的多准则优化成像调度

合理有效地利用遥感卫星资源获取更多高质量影像数据是卫星成像调度的重要工作。提出了一种新的成像调度解决方案。应用图论相关理论,建立卫星成像时间序无圈有向图模型,利用多项准则作为衡量标准对不同成像路径进行评价,提出时间序多准则最短路径算法求取优化成像路径。理论分析和实验表明,该解决方案可以在较短时间内获得多条pareto优化成像路径,具有良好的调度性能。     

基于Simulink的履带车辆离合器动态仿真实现

以系统仿真软件MATLAB中的Simulink软件包为工具,通过对摩擦离合器工作过程特点的分析,在合理假设的基础上,建立了离合器工作过程中的动态仿真模型。得到的仿真结果对于离合器的实际测试及其故障检测分析有一定的参考作用。     

重叠网格法在求解二维非定常欧拉方程中的应用

采用时间和空间二阶精度的ＴＶＤ格式数值模拟了二维楔的水平相对非定常运动过程与定常组合体流场。在数值模拟时，我们采用了重叠网格技术。这种方法大大减轻了复杂外形的网格生成工作量，而且重叠网格间可以有相对运动，这使我们对相对运动物体流场的数值模拟简便易行。     

钝倒锥体动导数数值工程模拟

分别采用求解非定常薄层近似的N－S方程数值模拟有粘扰动流场及非定常内伏牛顿流理论计算了钝倒锥外形的高超声速俯仰阻尼导数Cma＋Cmq。在非定常计算中通过引入“亚迭代”过程提高非定常流场的计算精度。两种方法计算结果一致，数值计算可应用于3＜M＜20，0°＜α＜20°时的一般流态俯仰阻尼导数计算。