部队作战效能综合评估法

高技术条件下局部战争的显著特点是参战单位多、对抗关系复杂、战争不确定因素增加,如何在此情况下客观评估部队的作战效能是作战研究领域一个重点和难点。通过综合运用定性分析法、网络分析法、战斗效能指数法、作战模拟及系统动力学等多种方法和理论,建立了一种可对部队作战效能进行评估的综合评估法。并以高技术条件下岛上进攻作战中装甲团的作战效能评估为例,详细介绍了该方法的实施过程,认为该综合评估法是行之有效的。     

航空轮胎用橡胶弹性体Mullins效应动态加载方法

航空轮胎用橡胶弹性体在服役过程中遭受严苛的动态循环工况。为了研究弹性体在此工况下的力学响应特征和损伤机理,提出基于应力波作用的Mullins效应动态加载实验方法。根据应力波传导与作用特征,采用Hopkinson压杆加载思路,设计和配置了各单元尺寸参数,进而搭建可用于橡胶弹性体材料动态循环加载的实验系统,并开展了航空轮胎用丁苯橡胶的动态循环加载试验。基于试验信号分析发现：加载系统实现了弹性体材料Mullins效应动态应变递增的试验加载。最后开展加载测试参数的影响因素分析,结果表明通过优化系统各单元可实现Mullins效应的动态加、卸载参数的控制。     

Scheduling maintenance and semiresumable jobs on a single machine

The majority of scheduling literature assumes that the machines are available at all times. In this paper, we study single machine scheduling problems where the machine maintenance must be performed within certain intervals and hence the machine is not available during the maintenance periods. We also assume that if a job is not processed to completion before the machine is stopped for maintenance, an additional setup is necessary when the processing is resumed. Our purpose is to schedule the maintenance and jobs to minimize some performance measures. The objective functions that we consider are minimizing the total weighted job completion times and minimizing the maximum lateness. In both cases, maintenance must be performed within a fixed period T, and the time for the maintenance is a decision variable. In this paper, we study two scenarios concerning the planning horizon. First, we show that, when the planning horizon is long in relation to T, the problem with either objective function is NP-complete, and we present pseudopolynomial time dynamic programming algorithms for both objective functions. In the second scenario, the planning horizon is short in relation to T. However, part of the period T may have elapsed before we schedule any jobs in this planning horizon, and the remaining time before the maintenance is shorter than the current planning horizon. Hence we must schedule one maintenance in this planning horizon. We show that the problem of minimizing the total weighted completion times in this scenario is NP-complete, while the shortest processing time (SPT) rule and the earliest due date (EDD) rule are optimal for the total completion time problem and the maximum lateness problem respectively. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 845–863, 1999     

A comparative study of three tool replacement/operation sequencing strategies in a flexible manufacturing system

This paper studies three tool replacement/operation sequencing strategies for a flexible manufacturing system over a finite time horizon: (1) failure replacement—replace the tool only upon failure, (2) optimal preventive tool replacement for a fixed sequence of operations, and (3) joint scheduling of the optimal preventive tool replacement times and the optimal sequence of operations. Stochastic dynamic decision models are used for strategies 2 and 3. The optimization criterion for strategies 2 and 3 is the minimization of the total expected cost over the finite time horizon. We will show through numerical studies that, with the same amount of information, the total expected costs can be reduced considerably by choosing an optimal strategy. Our conclusion is that in flexible manufacturing, optimal tool replacement and optimal operations sequencing are not separate issues. They should be considered jointly to minimize the expected total cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 479–499, 2000     

弹炮混编防空群兵力分配模型

针对对付现代日益发展的空袭手段的一种有效方法--弹炮混编防空布势中存在的防空武器种类繁多,兵力分配复杂,难以充分发挥各自效能的问题,建立了非线性规划模型,利用动态规划对该模型进行分析,运用拉格朗日降维法进行降维,将三维降为二维.经防空作战的实例验证该算法不但能将两维降到单维,而且还可以将多维降到单维,能节省计算机的内存使用率,提高仿真计算的速度,符合信息化条件下指挥决策实时化的要求且分配效果较好.     

红外成像系统对目标的探测能力分析

通过对红外热成像系统实验室综合性能参数MRTD(最小可分辨温差 )在实用条件下的修正 ,提出了实际计算目标探测概率的具体方法和步骤 ,此方法可用来定量评价目标的可探测性和目标隐身技术措施及设计方案的效能。     

血小板在凝血中作用的动力学模型

在生化实验的基础上提出了血小板在凝血中作用的动力学模型,通过定性分析和数值模拟,得到了血小板的激活比率、因子Ⅷ、Ⅸ对凝血酶生成有重要影响的一系列结论.     

Optimal nonmyopic gambling strategy for the generalized Kelly criterion

We consider the optimal wagers to be made by a gambler who starts with a given initial wealth. The gambler faces a sequence of two-outcome games, i.e., “win” vs. “lose,” and wishes to maximize the expected value of his terminal utility. It has been shown by Kelly, Bellman, and others that if the terminal utility is of the form log x, where x is the terminal wealth, then the optimal policy is myopic, i.e., the optimal wager is always to bet a constant fraction of the wealth provided that the probability of winning exceeds the probability of losing. In this paper we provide a critique of the simple logarithmic assumption for the utility of terminal wealth and solve the problem with a more general utility function. We show that in the general case, the optimal policy is not myopic, and we provide analytic expressions for optimal wager decisions in terms of the problem parameters. We also provide conditions under which the optimal policy reduces to the simple myopic case. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 639–654, 1997     

利用实际飞行数据插值的INS/GNSS组合导航仿真轨迹发生器

针对INS/GNSS组合导航仿真中捷联惯导系统陀螺、加速度计信号高精度模拟问题,提出基于实际飞行数据插值的动态轨迹解析生成仿真算法。对转换到地心惯性坐标系中的载体姿态、位置和重力场数据进行关于时间的样条函数插值,得到载体坐标系下陀螺角速率、角增量以及加速度计比力积分增量的高精度分段解析表达式。使生成的陀螺、加速度计信号符合载体运动学和动力学特性,反映杆臂效应影响,同时与经事后处理的实测GNSS伪距、伪距率等数据特征保持一致。提出四元数约束插值算法,其可满足四元数解析插值时范数为1的约束限制条件。基于某实际无人机飞行数据,验证了所提算法的有效性,其完全满足组合导航动态仿真精度要求。该算法也适用于其他高精度高动态导航系统和刚体运动控制仿真中的角运动、线运动传感器信号模拟。     

旋转自稳定末敏子弹运动特性分析

为研究某型旋转自稳定末敏子弹运动特性,充分考虑末敏子弹的结构强非对称特点和其初始抛撒条件,引入动不平衡弹体模型,推导超大攻角条件下子弹的空间6自由度弹道方程,计算分析子弹的稳态扫描运动特性。结果表明:子弹体的质量分布非对称和初始抛撒角速度是子弹药实现稳态扫描运动的必要条件;子弹扫描频率只由抛撒角速度ω_(σ0)决定,且和ω_(σ0)正相关;初始俯仰角φ_(a0)≥0°时,扫描角整体呈增大趋势,初始俯仰角φ_(a0)0°时,扫描角整体变化趋势为先减小后增大;扫描面积与配重-全弹质量比、初始俯仰角、初始偏航角和初始角速度呈正相关,与均质圆柱体转动惯量比呈负相关。