在柴油机放热曲线计算中两个关键问题的解决方法

对影响柴油机放热曲线精度计算的因素进行了讨论 ,并对影响放热率计算的主要问题如动态上止点修正、示功图光顺处理两个主要环节进行了分析研究 ,提出了解决方法 .     

基于中间表示规则替换的二进制翻译中间代码优化方法

动态二进制翻译在实现多源到多目标的程序翻译过程中,为屏蔽不同源平台间的硬件差异引入中间代码,采用内存虚拟策略进行实现,但同时带来中间代码膨胀问题。传统的中间代码优化方法主要采用对冗余指令进行匹配删除的方法。将优化重点聚焦在针对特殊指令匹配的中间表示规则替换上,提出了一种基于中间表示规则替换的二进制翻译中间代码优化方法。该方法针对中间代码膨胀所呈现的几种典型情景,描述了中间表示替换规则,并将以往应用在后端代码优化上的寄存器直接映射策略应用在此处。通过建立映射公式,实现了将原来的内存虚拟操作替换为本地寄存器操作,从而降低了中间代码膨胀率。使用SPEC CPU2006测试集进行了实验,验证了此优化方法的正确性和有效性。测试用例在优化前和优化后的执行结果一致,验证了优化方法的正确性;优化后测试用例的中间代码平均缩减率达到32.59%,验证了优化方法的有效性。     

西北高海拔、高寒地区热媒研究

针对西北高海拔、高寒地区供热速度慢、热效率低等问题,研制出一种新型、高效热媒,热媒在一个大气压下沸点可达到116℃。通过单因素实验及正交实验,优化出了热媒配方;经热媒节能效果现场模拟实验,证明了所研制的热媒能显著改善供热效果;对热媒腐蚀性、风险性进行了分析。该热媒成本低、工艺简单、腐蚀性小、安全性高,具有很好的经济效益和军事效益。     

基于XML的装备维修信息标准化

基于XML的装备维修信息标准化是我军装备信息保障的发展趋势.以设备技术说明书为例,对其进行了标准化信息分解,构建了相应的DTD和数据库结构,并讨论了实现标准化维修信息动态传输与交换的相关问题.     

部队作战效能综合评估法

高技术条件下局部战争的显著特点是参战单位多、对抗关系复杂、战争不确定因素增加,如何在此情况下客观评估部队的作战效能是作战研究领域一个重点和难点。通过综合运用定性分析法、网络分析法、战斗效能指数法、作战模拟及系统动力学等多种方法和理论,建立了一种可对部队作战效能进行评估的综合评估法。并以高技术条件下岛上进攻作战中装甲团的作战效能评估为例,详细介绍了该方法的实施过程,认为该综合评估法是行之有效的。     

航空轮胎用橡胶弹性体Mullins效应动态加载方法

航空轮胎用橡胶弹性体在服役过程中遭受严苛的动态循环工况。为了研究弹性体在此工况下的力学响应特征和损伤机理,提出基于应力波作用的Mullins效应动态加载实验方法。根据应力波传导与作用特征,采用Hopkinson压杆加载思路,设计和配置了各单元尺寸参数,进而搭建可用于橡胶弹性体材料动态循环加载的实验系统,并开展了航空轮胎用丁苯橡胶的动态循环加载试验。基于试验信号分析发现：加载系统实现了弹性体材料Mullins效应动态应变递增的试验加载。最后开展加载测试参数的影响因素分析,结果表明通过优化系统各单元可实现Mullins效应的动态加、卸载参数的控制。     

Scheduling maintenance and semiresumable jobs on a single machine

The majority of scheduling literature assumes that the machines are available at all times. In this paper, we study single machine scheduling problems where the machine maintenance must be performed within certain intervals and hence the machine is not available during the maintenance periods. We also assume that if a job is not processed to completion before the machine is stopped for maintenance, an additional setup is necessary when the processing is resumed. Our purpose is to schedule the maintenance and jobs to minimize some performance measures. The objective functions that we consider are minimizing the total weighted job completion times and minimizing the maximum lateness. In both cases, maintenance must be performed within a fixed period T, and the time for the maintenance is a decision variable. In this paper, we study two scenarios concerning the planning horizon. First, we show that, when the planning horizon is long in relation to T, the problem with either objective function is NP-complete, and we present pseudopolynomial time dynamic programming algorithms for both objective functions. In the second scenario, the planning horizon is short in relation to T. However, part of the period T may have elapsed before we schedule any jobs in this planning horizon, and the remaining time before the maintenance is shorter than the current planning horizon. Hence we must schedule one maintenance in this planning horizon. We show that the problem of minimizing the total weighted completion times in this scenario is NP-complete, while the shortest processing time (SPT) rule and the earliest due date (EDD) rule are optimal for the total completion time problem and the maximum lateness problem respectively. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 845–863, 1999     

A comparative study of three tool replacement/operation sequencing strategies in a flexible manufacturing system

This paper studies three tool replacement/operation sequencing strategies for a flexible manufacturing system over a finite time horizon: (1) failure replacement—replace the tool only upon failure, (2) optimal preventive tool replacement for a fixed sequence of operations, and (3) joint scheduling of the optimal preventive tool replacement times and the optimal sequence of operations. Stochastic dynamic decision models are used for strategies 2 and 3. The optimization criterion for strategies 2 and 3 is the minimization of the total expected cost over the finite time horizon. We will show through numerical studies that, with the same amount of information, the total expected costs can be reduced considerably by choosing an optimal strategy. Our conclusion is that in flexible manufacturing, optimal tool replacement and optimal operations sequencing are not separate issues. They should be considered jointly to minimize the expected total cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 479–499, 2000     

弹炮混编防空群兵力分配模型

针对对付现代日益发展的空袭手段的一种有效方法--弹炮混编防空布势中存在的防空武器种类繁多,兵力分配复杂,难以充分发挥各自效能的问题,建立了非线性规划模型,利用动态规划对该模型进行分析,运用拉格朗日降维法进行降维,将三维降为二维.经防空作战的实例验证该算法不但能将两维降到单维,而且还可以将多维降到单维,能节省计算机的内存使用率,提高仿真计算的速度,符合信息化条件下指挥决策实时化的要求且分配效果较好.     

血小板在凝血中作用的动力学模型

在生化实验的基础上提出了血小板在凝血中作用的动力学模型,通过定性分析和数值模拟,得到了血小板的激活比率、因子Ⅷ、Ⅸ对凝血酶生成有重要影响的一系列结论.