惯性效应对电主轴动态性能的影响

为分析高速电主轴轴承-转子系统的动态特性,利用有限元分析方法和Timoshenko梁理论,建立考虑离心力和陀螺力矩等高速惯性效应和系统阻尼的电主轴转子系统动力学模型;并以120MD60Y6型号高速电主轴为研究对象开展模态试验,获取系统不同工况下的固有频率。研究结果表明:离心力除了造成轴承支承软化外,还会造成转轴软化,且转轴软化是造成主轴系统固有频率下降的主要原因;陀螺力矩会将主轴系统每阶固有频率分为前后两个模态,且前后模态随转速变化的规律不同。仿真结果和试验结果吻合较好,这表明所建模型能够准确预测高速电主轴动态性能。     

飞秒激光脉冲在空气中成丝调控研究进展

在衍射、色散、克尔效应和多光子电离的动态平衡作用下,飞秒激光脉冲能够形成长距离的自引导光丝结构,并且伴随着狭长的等离子体通道。为精确控制超强飞秒激光脉冲在大气中的传输特性,针对飞秒光丝传输模式及光丝光场时空分布的有效调控已成为当前研究热点。在介绍飞秒激光成丝物理模型的基础上,对飞秒激光成丝调控方面的最新进展进行了综述,将光丝调控方式大致归结为两部分:时间调控和空间调控。其中,在空间维度上的调控主要可以分为相位调控、振幅调控以及特殊光场调控。同时指出飞秒激光大气成丝调制能产生众多的新效应,可为促进飞秒光丝实现更多新颖的潜在应用奠定基础。     

拉压异性材料厚壁圆筒和厚壁球壳的极限载荷分析

本文利用库仑屈服准则,研究了拉压异性材料厚壁圆筒和厚壁球壳的弹性极限载荷和塑性极限载荷,得出了新的结果和结论。计算结果表明,考虑了材料的拉压异性之后,厚壁圆筒和厚壁球壳的极限载荷均有明显提高。     

弹药保障效果评价的AHP-FUZZY方法

简要分析了我军弹药保障效果评价工作的不足之处,在此基础上,综合运用层次分析技术（AHP）和模糊评判技术（Fuzzy）,对战场上弹药保障效果评价进行了探讨。运用AHP法建立了弹药保障效果评价的层次结构模型,并详细论述了运用Fuzzy方法评价弹药保障效果的实现过程和注意问题。     

火炮射击精度的灰色系统预测

本文应用灰色系统预测的理论与方法,建立了射击精度的子系统与系统的预测模型,为从微观、宏观上控制误差,提高射击效果,提出了一种科学的预测方法。     

The Economic Consequences of the Libyan Spring: A Synthetic Control Analysis

Abstract

In 2011 a wave of revolutionary movements, the so-called Arab Spring, spread in the Middle East and North Africa. Libya was one of the most affected countries, ending Gaddafi’s dictatorship after an international intervention and a civil war. This paper assesses the effects that this revolution had on Libyan economy. The analysis is made by means of the synthetic control method. Our estimates for the 2011–2014 period show (i) a cumulative loss in the growth rate of per capita real GDP of 64.15%; (ii) a cumulative loss in per capita real GDP of 56,548 dollars; and (iii) a cumulative loss in the aggregate real GDP of 350.5 billion dollars.     

Effects of Mg/PTFE pyrotechnic compositions on reignition characteristics of base bleed propellants and heating mechanism

The effects of magnesium/polytetrafluoroethylene (Mg/PTFE) pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the performance and range of base bleed projectiles (BBPs).Owing to a decrease in pressure and temperature when the BBP leaves the muzzle,rapid depressurization occurs,which extinguishes the base bleed propellant.The Mg/PTFE py-rotechnic composition pressed in the igniter of the base bleed unit (BBU) provides additional energy to the BBU via a chemical reaction.Thus,the extinguished base bleed propellant is reignited under the effect of high-temperature combustion gas jets from the igniter.In this study,a numerical analysis is conducted to evaluate the effects of PTFE and Mg granularity as well as Mg/PTFE pyrotechnic compo-sitions.Owing to the rapid depressurization,the temperature and pressure was found to decrease for different Mg/PTFE pyrotechnic compositions.However,the depressurization time increased as the PTFE granularity increased,the Mg granularity decreased,and the Mg content increased.When the pressure in the combustion chamber of the BBU decreased to the atmospheric pressure,the combustion gas jets from the igniter expand upstream (rather than downstream).However,these combustion gas jets exhibit different axial and radial expansion characteristics depending on the pyrotechnic compositions used.The results show that the reignition delay time,td,of the base bleed propellant was 377.608,94.27,387.243,523.966,and 221.094 ms for cases A-E,respectively.Therefore,it was concluded that the Mg/PTFE pyrotechnic composition of case B was the most beneficial for the reignition of the base bleed propellant,with the earliest addition of energy and mass to the BBP.     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

论环境侵权民事责任的构成要件

随着社会经济的发展,环境污染已成为一个不能回避的社会话题。国家要想在将来寻求长远的发展,必须在现有立法的基础上,进一步完善环境保护的法律机制,从而实现社会的和谐。从环境侵权民事责任构成要件角度出发,阐述了如何保护受害人的合法权益,如何在经济发展的同时从根本上正确处理人与自然环境之间的关系。     

系统目标毁伤效果指标建模方法探讨

探讨常规导弹打击目标类群中系统目标的毁伤效果指标的建模方法。在对毁伤效果指标、毁伤意图、目标易损性等概念进行深入分析基础上,提出基于目标功能易损性的系统目标毁伤效果指标建模的思想。根据系统目标功能受损情况,归纳出三类毁伤效果指标常用的建模方法:效能模型、失效模型及基于毁伤的保障度模型。举例说明了方法的有效性,可为导弹武器攻击效能评估、耗弹量计算和瞄准点选择等提供定量决策依据。