Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

高空气球地面充氦气量计算方法分析与试验评估

作为高空气球研究中的一个重要问题,气球在地面发放前充入的氦气量会直接影响其上升速度和驻空高度,进而影响平台的可靠性和稳定性。因此研究充氦气量的准确计算方法十分必要。建立了高空气球上升过程动力学模型,计算了气球初始升速的理论值,用于与实际初始升速对比,为评估充氦气量计算方法提供依据。归纳了三种较为典型的高空气球地面充氦气量计算方法,根据实际开展的飞行试验,分析对比了三种方法的准确性和误差范围。提出了浮力补偿规律,完成了对三种方法的评估。通过研究可以对现有充氦气量计算方法进行有效修正,进而为高空气球的实际飞行提供指导。     

Performance study of jute-epoxy composites/sandwiches under normal ballistic impact

This study is undertaken to explore the use of natural fiber Jute-epoxy (JE), Jute-epoxy-rubber (JRE) sandwich composite for ballistic energy absorption. Energy absorbed and residual velocities for these composites are evaluated analytically and through Finite Element Analysis (FEA). FE analysis of JE plates is carried out for different thicknesses (3, 5, 10 and 15 mm). JE plates and JRE sandwiches having the same thickness (15 mm) are fabricated and tested to measure residual velocity and energy absorbed. The analytical results are found to agree well with the results of FE analysis with a maximum error of 9%. The study on JE composite plate reveals that thickness influences the energy absorption. Experimental and FE analysis study showed that JRE sandwiches have better energy absorption than JE plates. Energy absorption of a JRE sandwich is about 71% greater than JE plates. Damages obtained from FEA and testing are in good agreement. SEM analysis confirms composites failed by fiber rupture and fragmentation.     

一种基于“GM(1,1)”模型的火炮初速灰预测方法

火炮初速量测是火炮进行弹道准备中的一项重要内容,运用灰色理论探讨火炮初速预测问题,既有利于提高火炮射击精度的修正,又有利于进一步完善火炮初速测量雷达的使用操作和改进设计。针对火炮初速随机变化的特点,基于灰色理论中的GM(1,1)模型,构建火炮初速灰预测模型,确定预测结果精度检验方法。最后通过一应用实例验证了该方法具有一定的合理性与实用性。     

肋骨、舱壁布置形式对圆柱壳水下声振特性的影响

采用结构有限元耦合流体边界元方法对不同肋骨、舱壁布置形式的圆柱壳的流固耦合响应进行了计算。通过波数谱方法,结合柱壳规则波的声辐射效率,对不同波数成分结构波的振动与声辐射进行了量化。运用等间距与不等间距结构振动理论揭示了肋骨、舱壁布置形式对圆柱壳水下振动与声辐射特性产生影响的机理。研究发现:结构不等间距布置的圆柱壳水下振动特性整体上较优,但受壳体周向振动模式影响较大;结构不等间距布置的圆柱壳声辐射特性并不一定优于结构等间距布置的圆柱壳声辐射特性。     

A three-stage model for the perforation of finite metallic plates by long rods at high velocities

A three-stage theoretical model is presented herein to predict the perforation of a thick metallic plate struck normally by a long rod at high velocities. The model is suggested on the basis of the assumption that the perforation of a thick metallic plate by a long rod can be divided into three stages: (1) initial penetration; (2) plug formation and (3) plug slipping and separation. Various analytical equations are derived which can be employed to predict the ballistic limit, residual velocity and residual length of the long rod. It is demonstrated that the present model predictions are in good agreement with available experimental results for the perforation of finite steel targets struck normally by steel as well as tungsten alloy long rods at high velocities. It is also demonstrated that the dynamic maximum shear stress of a plate material has strong effect on plug formation and plug thickness which, in turn, exerts considerable influence on the residual velocities and lengths of a long rod at impact velocities just above the ballistic limit.     

FeAlCrNbB金属间化合物复合涂层的制备与表征

研究开发了一种FeAlCrNbB新型喷涂粉芯丝材,并结合自动化高速电弧喷涂工艺制备了该材料的复合涂层,分析了涂层的常规力学性能、组织结构和油润滑条件下的滑动摩擦磨损性能,并和常规FeAl涂层进行了对比。结果显示:FeAlCrNbB涂层具有相对较高的显微硬度和拉伸结合强度、低的孔隙率,组织致密,形成了由Fe-Al金属间化合物相、氧化物以及少量非晶和纳米晶组成的复合结构,由于这种复合结构的材料特征,使涂层具备较好的耐磨损性能。     

均匀设计法在建立PELE爆裂效应关系模型中的应用

为了研究钢壳体PELE爆裂效应与影响因素之间的数学关系,对钢壳体PELE侵彻钢板进行了数值仿真和试验。采用均匀设计法设计仿真工况,将仿真结果进行回归分析,得出爆裂效应与影响因素之间的数学关系式,实弹侵彻实验结果与仿真结果基本吻合。研究表明,影响因素均与壳体爆裂长度成非线性关系,增大靶板厚度、弹芯长度和着速或减小壳体厚度均有利于提高钢壳体的爆裂效应。相关结论为PELE的工程设计和应用提供了理论基础。     

铁基非晶纳米晶涂层的耐磨性研究

采用基于机器人的自动化高速电弧喷涂技术在45钢基体上制备了FeCrBSiMnNbY非晶纳米晶涂层。研究了非晶纳米晶涂层在油润滑条件下,不同磨损时间、速度、载荷对涂层的磨损行为。采用扫描电镜（SEM）、能谱分析仪（EDAX）和X射线衍射仪（XRD）对涂层的组织结构进行了表征,利用纳米压痕仪对涂层的力学性能进行了分析,摩擦磨损试验在MM200滑块磨损试验机上进行。结果表明：涂层组织均匀,结构致密,主要由非晶相和α-Fe相纳米晶组成;在相同磨损试验条件下,非晶纳米晶涂层的相对耐磨性为3Cr13涂层的4．6倍,磨损机制主要为脆性疲劳剥落。     

去耦瓦敷设方式对双层壳声振动的影响

文中对有限长敷设隔声去耦材料的加筋双层圆柱壳进行了振动和声辐射试验,测量了壳体的结构响应和水中的辐射声压,对内外壳全部敷设、内壳全部敷设、外壳全部敷设以及外壳部分敷设隔声去耦材料四种敷设方式进行了对比。结果表明,内外壳全部敷设隔声去耦材料对抑制振动和声辐射最有效,而且部分敷设隔声去耦材料对水下航行器敷设隔声材料的位置选择具有一定的参考价值。