坦克装甲车辆火控观瞄系统发展趋势分析

从火控总体的角度总结了国内外坦克装甲车辆火控观察瞄统的发展过程、现状,分析了观察瞄统的发展特点.对新近发展起来的顶置遥控武器站进行了初步研究,对其应配属的观瞄系统形式进行了探讨.在对未来装备需求和技术发展深入分析的基础上,提出了坦克装甲车辆火控观瞄系统未来的发展方向和需要重点突破和解决的关键技术.     

基于SINS/DVL/GPS的AUV组合导航技术

为了提高自主水下航行器组合导航系统的精度,选择了捷联式惯性导航系统(SINS)和多普勒速度声纳(DVL)导航为主、GPS卫星导航系统为辅的组合导航方法.通过Kalman滤波技术对组合导航的误差状态进行了估计,并采用反馈校正的方法修正SINS的导航误差.仿真结果表明SINS/DVL/GPS的组合导航可以有效地提高水下航行器SINS/DVL组合导航系统的导航精度,满足AUV远距离航行的精度需求.     

Research on simultaneous localization and mapping for AUV by an improved method: Variance reduction FastSLAM with simulated annealing

At present, simultaneous localization and mapping (SLAM) for an autonomous underwater vehicle (AUV) is a research hotspot. Aiming at the problem of non-linear model and non-Gaussian noise in AUV motion, an improved method of variance reduction fast simultaneous localization and mapping (FastSLAM) with simulated annealing is proposed to solve the problems of particle degradation, particle depletion and particle loss in traditional FastSLAM, which lead to the reduction of AUV location estimation accuracy. The adaptive exponential fading factor is generated by the anneal function of simulated annealing algorithm to improve the effective particle number and replace resampling. By increasing the weight of small particles and decreasing the weight of large particles, the variance of particle weight can be reduced, the number of effective particles can be increased, and the accuracy of AUV location and feature location estimation can be improved to some extent by retaining more information carried by particles. The experimental results based on trial data show that the proposed simulated annealing variance reduction FastSLAM method avoids particle degradation, maintains the diversity of particles, weakened the degeneracy and improves the accuracy and stability of AUV navigation and localization system.     

Clustered coverage orienteering problem of unmanned surface vehicles for water sampling

This study investigates a clustered coverage orienteering problem (CCOP), which is a generalization of the classical orienteering problem. The problem is widely motivated by the emerging unmanned techniques (eg, unmanned surface vehicles and drones) applied to environmental monitoring. Specifically, the unmanned surface vehicles (USVs) are used to monitor reservoir water quality by collecting samples. In the CCOP, the water sampling sites (ie, the nodes) are grouped into clusters, and a minimum number of nodes must be visited in each cluster. With each node representing a certain coverage area of the water, the objective of the CCOP is to monitor as much as possible the total coverage area in one tour of the USV, considering that overlapping areas provide no additional information. An integer programming model is first formulated through a linearization procedure that captures the overlapping feature. A two-stage exact algorithm is proposed to obtain an optimal solution to the problem. The efficiency and effectiveness of the two-stage exact algorithm are demonstrated through experiments on randomly generated instances. The algorithm can effectively solve instances with up to 60 sampling sites.     

固体药燃气逆向喷流热防护有效性分析

针对高超声速飞行器逆向喷流介质供应,采用固体药燃烧产生的燃气作为喷流的介质,来减小供应系统的质量与体积。采用数值计算的方法对高速飞行器球头逆向喷流流场进行数值模拟,分析不同飞行条件下高温燃气对球头热防护的影响。研究表明,采用高温燃气会减弱逆向喷流的热防护效果,但是对比无逆向喷流的驻点热流,最大热流仍然存在大幅度的下降。通过调节喷流压力,在不增加喷流质量的情况下,高温燃气逆向喷流可以取得与常温介质一致的热防护效果。针对6马赫数以上的飞行,现有的固体药燃气温度能够对飞行器头部实现有效的热防护。     

电驱动车辆反馈线性化自适应滑模滑移率控制

针对驱动和制动工况下电驱动汽车的滑移率控制这一强非线性和不确定性控制问题,提出了一种基于反馈线性化的自适应滑模控制(ASMC)方法。针对车辆驱动、制动工况下的车轮滑移率进行了动力学分析,建立了统一的状态方程。充分利用系统已知模型和参数,采用线性化反馈消除非线性变化的控制量增益系数的影响,通过对反馈项增益参数的自适应调整,适应附着路面不确定参数变化的控制要求,克服系统控制中存在的主要非线性和不确定性部分,对于系统难以建模描述部分,视为扰动,利用滑模控制抑制系统该部分的不确定性因素,同时保证系统响应的快速性,并对算法进行了Lyapunov稳定性分析。最后,以某型电动汽车为对象进行了仿真分析,结果表明采用ASMC控制系统动态响应快、精度高、抗扰能力强,对路面参数变化具有较强的鲁棒性,同时输出控制量抖振小。     

武器装备效能评估指标体系分析与研究

详细介绍了武器装备效能评估指标的类型,并对它们之间的关系进行了分析。描述了几种效能评估指标的选取方案,并根据指标体系建立的原则,以炮兵装备为例建立了其指标体系,这种指标体系较为全面地反映了炮兵装备的各类效能,为效能评估奠定了基础。     

多约束下的高超声速飞行器三维非线性自适应末制导律

面向多约束下高超声速飞行器末制导过程中的通道耦合、参数扰动、模型失配等突出问题,设计一种适于高超声速飞行器的三维非线性自适应末制导律。为了模型描述的完整性和简洁性,引入视线旋量和旋量速度的概念,并基于此建立三维制导参考模型和实际系统的表达式;为了保证制导律的鲁棒性和自适应性,基于自适应控制理论,设计一种三维非线性自适应制导律;通过数学推导证明了该制导律的稳定性。该制导律能够从理论上克服高超声速飞行器末制导面临的通道耦合、参数扰动、模型失配等突出问题,满足多约束制导要求。仿真结果验证了所设计制导律的有效性。     

应用边界交叉法的高超声速滑翔飞行器多目标轨迹优化

针对高超声速滑翔飞行器复杂约束条件下多目标轨迹设计问题,基于边界交叉法和伪谱法提出多目标轨迹优化方法。分析高超声速滑翔飞行器复杂约束轨迹优化问题的特点,提出多目标轨迹优化问题。采用边界交叉法和伪谱法将多目标轨迹优化问题转化为一组单目标优化子问题,利用非线性规划算法分别求解。在优化过程中,将已求解子问题的解作为下一个子问题的初始值,求解最大横程和最小峰值热流轨迹优化问题。仿真结果表明:所提方法能够有效搜索到优化轨迹的Pareto前沿,可以为高超声速滑翔飞行器轨迹设计提供参考。     

用于混合动力汽车的球形发动机热力学过程分析

作为混合动力汽车增程系统的一种新型动力源,球形发动机有着功率密度高,结构紧凑等优点。在介绍球形发动机工作原理及基本结构的基础之上,研究了发动机气缸容积变化规律,分析发动机燃烧过程,建立了发动机热力学理论模型。利用FLUENT开展了仿真研究,验证了模型的正确性,进而对于发动机燃油喷射过程进行了分析。结果表明：计算得到的气缸内部温度与压力曲线与仿真得到的结果基本一致,验证了理论模型的正确性。在燃油喷射的过程中,可能会出现涡团状的燃油喷射轨迹,使得局部富油发生,燃烧性能变差。