区间正交小波变换域FLP算法及其在捷联寻北中的应用

针对机抖激光陀螺角随机游走和发动机干扰等影响静态捷联寻北精度的问题,提出了一种新的基于区间正交小波变换的前向线性预测算法。该算法利用前向线性预测技术以及区间正交小波变换抑制边界效应的能力,有效地减小了角随机游走和发动机干扰。车载实验证明该算法的有效性。     

Effect of change of sand properties on travel distance of ricocheted debris

The debris from exploded buildings can ricochet after colliding with the ground, thus increasing the debris travel distance and danger from any associated impacts or collisions. To reduce this danger, the travel distance of ricocheted debris must be accurately predicted. This study analyzed the change in the travel distance of ricocheted concrete debris relative to changes in the properties of a sand medium. Direct shear tests were conducted to measure the change in internal friction angle as a function of temperature and water content of the sand. Finite element analysis (FEA) was then applied to these variables to predict the speed and angle of the debris after ricochet. The FEA results were compared with results of low-speed ricochet experiments, which employed variable temperature and water content. The travel distance of the debris was calculated using MATLAB, via trajectory equations considering the drag coefficient. As the internal friction angle decreased, the shear stress decreased, leading to deeper penetration of the debris into the sand. As the loss of kinetic energy increased, the velocity and travel distance of the ricocheted debris decreased. Changes in the ricochet velocity and travel distance of the debris, according to changes in the internal friction angle, indicated that the debris was affected by the environment.     

Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation

In current guidelines, the free air blast loads (overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design. However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads, three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design.     

角度欺骗有源假目标的动力学特性

针对高空高速目标探测过程中可能出现的角度类欺骗有源假目标,从理论上系统地分析了其动力学性质,导出了假目标的动力学方程,并分析了假目标的机械能和动量矩守恒问题。理论分析和仿真试验均表明,具有固定角度欺骗的方位有源假目标其动力学特性和真实目标完全一致,在动力学上是无法鉴别真伪的;除此之外的其他角度类欺骗有源假目标均不满足高空高速目标椭圆轨道特性以及动力学守恒定律,利用这种差异可以在数据处理层对假目标进行鉴别。     

尾流自导鱼雷直进射击系统误差的提前角修正方法

针对尾流自导鱼雷直进射击方式下弹道简化产生的命中结果系统误差问题,采用几何分析法,首先,分析了尾流自导鱼雷的直进射击原理;然后,依据尾流自导鱼雷弹道过程,建立了尾流自导鱼雷命中点偏差的解析计算模型,并分析了该偏差对鱼雷命中效果的影响;最后,研究了消除该系统误差的提前角修正方法。通过实例论证了该修正方法的可行性和有效性。     

便携式自寻的反坦克导弹攻顶弹道研究

便携式反坦克导弹在通过击顶方式打击目标时,要同时满足落角和精度的要求,以达到对目标的毁伤效能。首先推导带落角约束的最优比例导引律;然后设计携式反坦克导弹击顶弹道方案,导弹先出筒无控,以指数规律完成爬升,采用定攻角进行滑翔飞行,弹道末端运用推导的导引律来满足对落点和落角的约束。仿真结果表明,当反坦克导弹攻击不同距离的目标时,该弹道方案具有较强的有效性。     

机械抖动偏频激光陀螺静态测角方法

阐述采用机械抖动偏频激光陀螺进行静态角度测量的原理,分析测角随机误差与激光陀螺角随机游走系数、测量时间的关系,通过转台分度误差实验验证了测角随机误差公式。采用排列互比法对测角系统误差和转台分度误差进行分离。实验与理论分析表明,静态测角方法具有良好的环境适应性和稳定性,测角随机误差优于0.26″,系统误差优于1″。最后分析了进一步减小测角随机误差和系统误差的措施。     

潜艇攻击鱼雷最小射程圆内目标的方法

针对潜艇攻击鱼雷最小射程圆内目标的方法问题,首先,给出了不同自导方式下鱼雷最小射程的计算方法,并分析其对鱼雷攻击的影响;然后,依据鱼雷二次转角射击弹道过程,建立了鱼雷二次转角射击通式,并分析了鱼雷二次转角射击需满足的约束条件;在此基础上,深入研究了潜艇攻击鱼雷最小射程圆内目标的具体方法。最后通过实例验证了攻击方法的可行性和有效性。     

旋转自稳定末敏子弹运动特性分析

为研究某型旋转自稳定末敏子弹运动特性,充分考虑末敏子弹的结构强非对称特点和其初始抛撒条件,引入动不平衡弹体模型,推导超大攻角条件下子弹的空间6自由度弹道方程,计算分析子弹的稳态扫描运动特性。结果表明:子弹体的质量分布非对称和初始抛撒角速度是子弹药实现稳态扫描运动的必要条件;子弹扫描频率只由抛撒角速度ω_(σ0)决定,且和ω_(σ0)正相关;初始俯仰角φ_(a0)≥0°时,扫描角整体呈增大趋势,初始俯仰角φ_(a0)0°时,扫描角整体变化趋势为先减小后增大;扫描面积与配重-全弹质量比、初始俯仰角、初始偏航角和初始角速度呈正相关,与均质圆柱体转动惯量比呈负相关。     

可实现以期望角度过顶迂回打击的制导律设计

在已有的小型导弹角度约束制导律设计中,对敌方目标打击角度约束范围往往有限.为了扩大角度约束的可行范围,实现对目标的全方位打击,基于双圆弧原理设计了可实现过顶迂回打击的制导律.首先,建立了导弹的末制导段相对运动模型,然后对双圆弧曲线拟合的原理进行了介绍和推导证明,对于两段圆弧的关键参数进行了推导,最后基于该原理设计了一种...