舰空导弹综合试验与鉴定方法

从综合试验与鉴定的思路出发 ,针对舰空导弹的战术技术特点 ,建立了鉴定指标体系 ,论述了各种性能的综合试验与鉴定方法 ,并提出了需要研究的关键技术。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Exact algorithms for scheduling multiple families of jobs on parallel machines

In many practical manufacturing environments, jobs to be processed can be divided into different families such that a setup is required whenever there is a switch from processing a job of one family to another job of a different family. The time for setup could be sequence independent or sequence dependent. We consider two particular scheduling problems relevant to such situations. In both problems, we are given a set of jobs to be processed on a set of identical parallel machines. The objective of the first problem is to minimize total weighted completion time of jobs, and that of the second problem is to minimize weighted number of tardy jobs. We propose column generation based branch and bound exact solution algorithms for the problems. Computational experiments show that the algorithms are capable of solving both problems of medium size to optimality within reasonable computational time. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 823–840, 2003.     

教学质量评价中协方差分析的应用

协方差分析是在方差分析与回归分析基础上发展起来的一种统计方法 ,通过对考试成绩的方差分析与协方差分析结果的比较 ,探讨协方差分析在教学效果评价中的作用。     

基于PXI的舰炮电气设备通用自动测试系统

采用虚拟仪器技术,并通过软件产生模拟信号拉制设备的运转,完成动态信号的提取,实现电气设备测试系统的研制.该系统具有通用性、高效性和易用性等特点,具有较好的实用价值.     

基于改进LS-SVM的异步电机转子故障诊断

为了提高异步电动机转子故障的诊断精度,给出了一种基于改进最小二乘支持向量机(LS-SVM)的多故障分类算法。首先运用FFT处理电机的定子电流信号得到信号频谱图,从中提取故障特征向量;然后将特征向量送入改进算法进行故障诊断时,在原有多分类算法的基础上引入层次分析法确定故障类别的权重,根据权重值确定故障的诊断顺序,依次进行故障分类。实验表明,改进算法用于故障诊断节省了诊断时间,提高了诊断精度,具有很好的推广前景。     

基于χ~2检验的惯性/卫星紧耦合系统故障检测与隔离方法

研究了一种基于χ~2检验的惯性/卫星紧耦合系统故障检测与隔离方法,该方法可利用故障检测函数自动识别单个卫导故障,并实时剔除故障星重构观测信息序列,从而避免了对紧耦合系统的影响。构建数字化仿真环境对所研究的故障检测与隔离方法进行了仿真,仿真结果表明,该方法可在卫星发生故障时及时检测并隔离故障星,并自动实现观测信息重构,保证了紧耦合系统的精度和完好性。     

基于AdaBoost-SVM的P2P流量识别方法

针对传统的P2P流量识别技术存在识别率低和误判率高的缺点,将机器学习中Ada Boost算法的良好分类能力和SVM的泛化能力结合起来,提出一种基于Ada Boost-SVM组合算法的P2P网络流量识别模型,将SVM作为Ada Boost的基分类器,运用最小近邻法计算支持向量与训练集的样本间的距离实现分类进行P2P流量识别。最后,以4种P2P流量数据为研究对象在MATLAB上进行仿真,仿真结果表明,提出的Ada Boost-SVM的组合算法在P2P网络流量的分类性能和分类准确率上都优于单纯的Ada Boost和SVM,组合算法的P2P流量平均识别率高达98.7%,远高于Ada Boost和SVM的识别率。     

Military expenditure and income distribution in South Korea

This paper attempts to investigate the long-run and the causal relationship between military expenditure and income distribution in South Korea for the period 1965–2011. Applying the bounds test approach to cointegration, we found a long-run relationship between military expenditure and the Gini coefficient with military expenditure having a positive and a statistically significant impact on income inequality. A 1% rise in military expenditure increased the Gini coefficient by 0.38%. Application of the lag-augmented causality test also reveals a unidirectional causality running from military expenditure to income inequality. The evidence seems to suggest that devoting more resources to the military sector may further worsen income inequality in South Korea.     

基于邻接矩阵的软件测试环境规划设计方法

在分析软件测试环境的基础上,研究了软件试验中测试用例设计面临的突出问题,从软件测试环境的规划出发,基于有向图的邻接矩阵,设计满足一定覆盖度标准的软件测试环境规划方法,可为软件试验提供技术参考和研究方向。