无人飞艇平台摄像机防振研究

无人飞艇作为理想的信息平台,在预警、反恐、侦察监视和通信等方面发挥着重要作用。而艇载侦察监视设备CCD摄像机受到飞艇发动机振动的影响,会对成像产生消极影响。为此,分析了影响飞艇摄像机的成像质量的因素,采用被动减振的方案,达到了有效克服振动的目的。     

添加型防静电涂料的研究进展

对添加型防静电涂料的组成、导电机理、导电填料的研究状况进行了综述,重点论述了导电填料的研究重点和发展方向.白色和浅色导电填料是未来添加型防静电涂料的重点研究对象.     

美军作战实验室建设研究

简要回顾了美军作战实验发展的历史,从军种到联合详细阐述了美军作战实验室完整的体系,并简要介绍了各作战实验室所完成的典型实验,研究了美军作战实验室主要的实验方法和技术手段,剖析了美军作战实验室的运行机制,探讨了美军作战实验室建设带给我们的启示。     

陆军战术作战仿真想定生成方法

针对作战仿真中想定数据的生成需求,在分析仿真想定内容的基础上,规范了仿真想定的生成流程,给出了指挥规则的抽取和量化方式,提出了面向实体的仿真想定结构化表示方法和基于XML的仿真想定存储结构,分析了利用G IS和3D技术实现作战计划和行动协同规划的方法途径,探讨了仿真想定数据的校核内容和重用机制,为实现仿真想定生成工具提供了一种有效的思路。     

镁合金表面电弧喷涂Fe基非晶纳米晶涂层的性能

采用自动化高速电弧喷涂技术在镁合金基体上制备了FeCrBSiMoNbW非晶纳米晶涂层。采用Flir A20M型红外热像仪对Fe基非晶纳米晶喷涂层的表面温度场进行了实时监测。对Fe基非晶纳米晶涂层和传统的3Cr13涂层的组织结构、力学性能以及摩擦学性能进行了对比分析。实验结果表明：Fe基非晶纳米晶涂层组织致密,孔隙率低,具有相对较高的硬度和拉伸结合强度;形成了非晶相和纳米晶相组成的复合结构,使得涂层具备较好的耐磨减摩性能。     

远程迷惑式干扰效果评估模型

在分析远程迷惑式干扰机理的基础上,研究迷惑式干扰的各种影响因素,分别引入了箔条云相似因子、时间有效性因子、编队模拟逼真度因子、雷达识别影响因子和战术选择影响因子等多个效果评估指标,提出了多箔条云数目的整合模型,然后求导出在远程迷惑式干扰务件下搜索雷达对真实目标的捕捉概率计算模型,最后验证了模型的合理性.     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density

In order to predict the storage life of a certain type of HTPB (hydroyl-terminated polybutadiene) coating at 25 C and analyze the influence of pre-strain on the storage life, the accelerated aging tests of HTPB coating at 40 C, 50 C, 60 C, 70 C with the pre-strain of 0%, 3%, 6%, 9%, respectively were carried out. The variation regularity of the change of crosslinking density was analyzed and the aging model of HTPB coating under pre-strained thermally-accelerated aging was proposed. The storage life of HTPB coating at 25 C was estimated by using the Berthelot equation as the end point of the aging life with a 30% decrease in maximum elongation. The results showed that the change of crosslinking density of HTPB coating increased with the increase of aging temperature and aging time, and decreased with the in-crease of pre-strain. Under 0% pre-strain, the relationship between the change of crosslinking density of HTPB coating and the aging time can be described by the logarithmic model with the confidence probability greater than 99%.The stress relaxation phenomenon existed under 3%, 6% and 9% pre-strained aging. The aging model considering chemical aging and pre-strain was established with the confidence probability greater than 90%. The storage life of HTPB coating was 15.2935 years at 25 C under 0% pre-strain, which was reduced by 13.9007%, 75.6949% and 89.7859% under 3%, 6% and 9% pre-strain, respectively. The existence of pre-strain has a serious impact on the storage life of HTPB coating, therefore, the pre-strain should be avoided as much as possible during the actual storage.     

Damage mechanics and energy absorption capabilities of naturalfiber reinforced elastomeric based bio composite for sacrificial structural applications

The present study deals with the experimental, finite element (FE) and analytical assessment of low ballistic impact response of proposedflexible'green' composite make use of naturally available jute and rubber as the constituents of the composite with stacking sequences namely jute/rubber/jute (JRJ), jute/rubber/rubber/jute (JRRJ) and jute/rubber/jute/rubber/jute (JRJRJ). Ballistic impact tests were carried out by firing a conical projectile using a gas gun apparatus at lower range of ballistic impact regime. The ballistic impact response of the proposed flexible composites are assesses based on energy absorption and damage mechanism. Results revealed that inclusion of natural rubber aids in better energy ab-sorption and mitigating the failure of the proposed composite. Among the three different stacking se-quences of flexible composites considered, JRJRJ provides better ballistic performance compared to its counterparts. The damage study reveals that the main mechanism of failure involved in flexible com-posites is matrix tearing as opposed to matrix cracking in stiff composites indicating that the proposedflexible composites are free from catastrophic failure. Results obtained from experimental, FE and analytical approach pertaining to energy absorption and damage mechanism agree well with each other. The proposed flexible composites due to their exhibited energy absorption capabilities and damage mechanism are best suited as claddings for structural application subjected to impact with an aim of protecting the main structural component from being failed catastrophically.     

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.