部分频带干扰下伪码跟踪误差分析

为精确分析部分频带干扰下伪码跟踪误差,需要考虑伪码的非理想随机特性。引入伪码的精细功率谱模型,对比分析了不同带宽干扰下基于简化谱和精细谱的码跟踪误差。定义了相对误差系数,用以定量描述伪码非理想随机特性对码跟踪误差的影响。当干扰带宽增大时,相对误差系数逐渐减小,伪码非理想随机特性对码跟踪误差的影响逐渐减小,基于简化谱的分析趋近于基于精细谱的分析。结合GPS L1 C/A码,给出了相对误差小于0.2的最小干扰带宽,并将其作为基于简化谱分析的适用条件。研究表明当干扰带宽大于伪码周期的频率的300倍时,伪码非理想随机特性导致的码跟踪精度变化可忽略,反之,则需要基于精细的功率谱模型进行码跟踪精度分析。     

多目标数据关联的多维Lagrangian松驰法

将多目标跟踪中的数据关联问题提成为一个离散最优化问题 ,并采用 L agrangian松驰算法来克服该问题面临的计算困难 ,这是目前多祯多目标测量数据关联研究发展的重要方向。首先将多祯多目标数据关联问题建立为一个带约束的多维分配问题 ;并在维数大于 2时 ,采用 L agrangian松驰算法来松驰约束条件 ,使问题降维为计算上可接受的二维分配问题。     

大型舰船电力系统网络重构研究

大型舰船电力系统的出现使供电方式由原来的辐射状向环形发展,其网络重构是一个崭新的问题.文中给出了大型舰船电力系统的网络拓扑结构并综合考虑了线路容量限制、节点电压约束及供电负荷优先性的重构数学模型,保证了各种情况下最大限度地给负荷供电.将规划遗传算法应用于所建模型的求解,并应用算例验证了此解法的可行性.     

用于纯方位目标跟踪的修正极坐标自适应卡尔曼滤波算法

针对纯方位被动目标跟踪中,直角坐标系下的扩展卡尔曼滤波器容易发散而导致滤波精度很差的问题,提出了一种修正极坐标系下的自适应卡尔曼滤波算法,对虚拟系统噪声进行估计,动态补偿模型线性化误差,对其滤波理论及算法进行了研究和仿真。仿真结果表明,该算法提高了滤波的稳定性、快速性和精确性,优于一般的扩展卡尔曼滤波算法。     

线性控制系统的渐近跟踪控制与干扰解耦的设计及仿真

基于内模原理,针对线性控制系统设计了系统输出对参考信号的渐近跟踪控制和干扰解耦,同时实现了系统的镇定,并给出了设计算法和算例,通过MATLAB软件进行仿真,验证了该方法的有效性。     

多雷达多目标航迹跟踪中FMM神经网络的应用与仿真

提出了一种基于Fuzzy Min-Max (FMM)人工神经网络的多雷达多目标航迹跟踪的方法。仿真应用的实验结果表明,这种方法能够有效地完成多雷达多目标的数据融合,并比较理想地实现了多雷达多目标的航迹相关。     

基于UKF-SOFNN的近距机动目标跟踪滤波算法

对于多目标杂波环境中的机动目标跟踪,由于目标集群中各个目标间的空间距离可能小于探测器的空间分辨率,因而可能出现误跟、诱饵欺骗与杂波虚警等一系列严重后果。对此,提出一种综合运用UKF(不敏卡尔曼滤波)和SOFNN(自组织模糊神经网络)的UKF-SOFNN滤波跟踪算法,将机动目标模型视作严格的非线性系统,利用UKF-SOFNN对非线性参数的辨识能力提高对锁定机动目标的跟踪能力。仿真实例表明,该算法能有效地辨识目标群中的目标,并进行可靠的跟踪。     

基于EKF算法的弹道导弹助推段跟踪建模与仿真

围绕弹道导弹助推段跟踪问题,分析了助推段反弹道导弹的基本作战过程,建立了弹道导弹助推段动力学模型,分别就单传感器/单弹道导弹和多传感器/多弹道导弹两种情况建立了基于EKF算法的弹道导弹助推段跟踪模型,并通过算例验证了模型和算法的有效性,可为助推段反弹道导弹建模与仿真提供一定的参考。     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Automated integration of real-time and non-real-time defense systems

Various application domains require the integration of distributed real-time or near-real-time systems with non-real-time systems.Smart cities,smart homes,ambient intelligent systems,or network-centric defense systems are among these application domains.Data Distribution Service(DDS)is a communi-cation mechanism based on Data-Centric Publish-Subscribe(DCPS)model.It is used for distributed systems with real-time operational constraints.Java Message Service(JMS)is a messaging standard for enterprise systems using Service Oriented Architecture(SOA)for non-real-time operations.JMS allows Java programs to exchange messages in a loosely coupled fashion.JMS also supports sending and receiving messages using a messaging queue and a publish-subscribe interface.In this article,we pro-pose an architecture enabling the automated integration of distributed real-time and non-real-time systems.We test our proposed architecture using a distributed Command,Control,Communications,Computers,and Intelligence(C4I)system.The system has DDS-based real-time Combat Management System components deployed to naval warships,and SOA-based non-real-time Command and Control components used at headquarters.The proposed solution enables the exchange of data between these two systems efficiently.We compare the proposed solution with a similar study.Our solution is superior in terms of automation support,ease of implementation,scalability,and performance.