金属泡沫复合材料夹芯结构的压痕响应实验

金属泡沫夹芯结构是近年来新出现的一种明显具有结构和功能一体化特点的新型轻质材料,它在临近空间飞行器、航海及汽车等领域有着广阔的应用前景。以以纤维增强复合材料面板、闭孔泡沫铝芯子为特征的复合材料夹芯结构为研究对象,对其在球形压头作用下的压痕响应、损伤模式、变形机制和失效机理进行理论分析和实验研究。研究发现,泡沫铝复合材料夹芯结构的压痕响应是夹芯结构的各个组成部分的响应、相互作用以及压头属性的综合作用结果。泡沫铝复合材料夹芯结构在球压头作用下的损伤模式为基体开裂、纤维断裂、层间分层、泡沫铝的屈服及剪切断裂五种失效模式。     

非结构动网格分区并行计算方法

针对包含运动边界的非定常流动问题,基于弹簧近似法设计了一套非结构动网格分区并行计算流程,引入了METIS软件进行非结构网格二次剖分,研究了对接边界通信类型及其处理方法,基于消息传递并行编程模式实现了非结构动网格求解器的并行化。测试结果表明:该求解器具有较高的并行效率,网格变形模块对非结构动网格并行计算性能具有重要影响。     

基于协同相关度的作战任务分解优化

针对协同作战中任务分解的优化问题,构建了任务协同相关度的量化模型。对作战任务中几个基本概念进行定义,从时间、逻辑、功能3个维度对任务间的协同关系进行了形式化描述,在此基础上,建立了任务协同关系的综合度量模型。最后,通过设置任务协同度阈值的方法,对协同紧密的任务进行聚合,实现任务分解的优化。通过仿真实验验证了模型的可行性和有效性。     

Optimally scheduling interfering and non‐interfering cranes

This article treats the problem of scheduling multiple cranes processing jobs along a line, where cranes are divided into different groups and only cranes in the same group can interfere with each other. Such crane scheduling problems occur, for example, at indented berths or in container yards where double rail‐mounted gantry cranes stack containers such that cranes of the same size can interfere with each other but small cranes can pass underneath larger ones. We propose a novel algorithm based on Benders decomposition to solve this problem to optimality. In a computational study, it is shown that this algorithm solves small and medium‐sized instances and even many large instances within a few seconds or minutes. Moreover, it improves several best known solutions from the literature with regard to the simpler problem version with only one crane group. We also look into whether investment in more complicated crane configurations with multiple crane groups is actually worthwhile.     

网络撕裂法在测磁仪故障诊断中的应用

针对CCY - 1G型数字测磁仪的具体电路结构及功能 ,利用网络撕裂法对其进行故障诊断 ,实现了故障诊断快速、准确的目的     

一种基于DSP的雷达/电视视频图像压缩解压缩技术

在基于多媒体DSP处理器DM642并行处理平台上,提出一种雷达、电视视频图像压缩解压缩技术系统方案。采用多尺度小波分解技术和MPEG4压缩解压缩技术,分别对采样后的雷达视频、电视及红外视频数据压缩并分发到网络,由终端接收解压缩后融合实现多层多窗口综合显示。应用该方案可以实现舰载视频传感器和显控台以及武器系统的动态组合,提高装备的使用灵活性。     

磁悬浮列车滑模变结构控制器设计及实现

本文在建立磁悬浮线性模型基础上,设计变结构控制器,进行了仿真计算,并用模拟电路进行实验,给出了仿真和实验结果     

近地卫星Ka频段数传链路抗雨衰ACM模式设计

针对近地卫星数传时的信道时变性和严重的Ka频段雨衰现象,采用自适应编码调制（ACM）技术能够充分利用链路资源,相对于传统的固定编码调制方式,进一步提高了链路的数据吞吐量。提出了近地卫星Ka频段数传链路ACM模式设计方法,在降雨环境下建立Ka频段数传链路模型,根据信道状况确定ACM选用模式;采用基于导频符号的最大似然信噪比估计算法结合移动平均的平滑方法实现信道估计,有效地减小了估计值的波动。仿真结果表明,无论晴天还是雨天,采用提出的卫星数传链路ACM模式设计方法,能够在保证系统可靠性的同时获取较高的数据吞吐量。     

非奇异快速终端滑模及动态面控制的轨迹跟踪制导律

针对飞行器跟踪预设轨迹的问题,提出非奇异快速终端滑模和角度约束的轨迹跟踪制导律。通过引入虚拟目标点,提出参考轨迹曲率半径的期望视线角约束条件,建立带有视线角约束并考虑自动驾驶仪动态特性的轨迹跟踪数学模型。为了保证在有限时间内跟踪预设轨迹并避免出现奇异问题,采用快速非奇异终端滑模和动态面控制方法进行制导律设计。推导出视线角误差和轨迹跟踪误差之间的数学关系,并利用Lyapunov稳定性准则证明轨迹跟踪误差最终有界任意小。与弹道成型轨迹跟踪制导律进行仿真对比,仿真结果表明所提出的制导律具有良好的跟踪性能及鲁棒性。     

Liquid phase in-situ synthesis of LiF coated boron powder composite and performance study

Among practical metal additives, boron (B) has a high volumetric heating value, making it a promising choice as a fuel additive. Although B can theoretically yield a large amount of energy upon complete combustion, its combustion is retarded by the initial presence of B oxide, which coats the surfaces of B particle. To improve the ignition and combustion properties of B powder, LiOH and NH₄F were used as precursors to synthesize uniformly LiF-coated B composites (LiF-B) in situ. The LiF-B mixture was also prepared for comparison using a physical method. X-ray diffraction (XRD), Fourier-transform infrared (FTIR), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used to characterize the morphologies and compositions of the products. The thermal and combustion properties of the samples were characterized by thermal gravity-differential thermal gravity (TG-DTG), differential scanning calorimetry (DSC) and closed bomb experiment. The XRD, FTIR, SEM and EDS results demonstrated the successful preparation of the coated LiF-B sample. The TG-DTG and closed bomb experiment results indicated that the addition of LiF decreased the ignition temperature of B powder, and increasing its reaction efficiency. DSC results show that when LiF-B was added, the released heat of underwater explosive increased by 6727.2, 7280.4 and 3109.6 J/g at heating rates of 5, 10, and 15 °C/min, respectively. Moreover, LiF-B decreased the activation energy of secondary combustion reaction of explosive system as calculated through Kissinger's method by 28.9%, which indicated an excellent catalytic effect for the thermal decomposition of underwater explosive. The results reveal that LiF can improve the combustion efficiency of B powder, thereby increasing the total energy of explosives. The mechanical sensitivity increased slightly after adding LiF-B to the underwater explosive. Compared to the underwater explosive with added B, the mechanical sensitivity of the explosive with added LiF-B was significantly lower.