高能离子在材料中输运的蒙特卡罗模拟

利用蒙特卡罗方法对高能离子在材料中的输运进行了计算机模拟研究 ,入射高能离子与靶材料的作用近似为核散射和电子作用两个独立的部分 ,核散射能量损失采用经典两体碰撞近似 ,通过对碰撞参数的随机抽样得到散射角 ,电子能量损失高能时采用Bethe-Bloch公式 ,低能时采用Lindhard -Scharff公式 ,中能时采用插值公式。最后对高能铁离子入射于铝、硅材料的输运进行了模拟计算 ,给出了模拟结果并进行了分析。     

载流管道在基础振动下的振动控制

根据舰船管道的实际情况 ,在载流管系的动态响应分析中引入基础振动的影响 .计算分析了舰船管道系统在流体激励、外部干扰力和基础振动情况下的动态响应 .研究了如何减小基础振动对管路系统振动的影响 ,通过计算分析 ,提出了比较有效的减振措施 .     

面阵CCD非线性响应的测量

针对CCD测量技术中出现的非线性问题 ,提出了以光电池为标定基准的CCD非线性测试以及非线性标定方法。通过实际测试的实验数据 ,详细说明了如何利用测得的数据进行CCD非线性标定。该方法简单易行、有较高的精度和一定的科研参考价值。     

飞行器动力学环境预示技术应用研究

动力学环境试验技术已被广泛应用 ,但动力学环境预示技术还没有得到很好的重视和发展。讨论了几种动力学环境预示方法的特点 ,着重研究了统计能量分析 ( SEA)方法的原理及其应用 ,并以某型号发动机长尾喷管舱为例 ,具体给出其工程分析估计过程     

单基发射药的热自燃数值模拟与其剩余能量变化研究

建立了单基发射药柱热自燃的数学模型 ,根据模型利用数值模拟的方法计算了单基发射药的中心温度与其剩余能量 ,并对中心温度的模拟结果与实验结果进行了比较。解决了其热分解动力学参数的非唯一性问题 ,为装填有单基发射药各种弹药的热自燃计算提供了依据     

Optimizing natural gas pipeline transmission with nonuniform elevation: A new initialization approach

In this paper, we develop an iterative piecewise linear approximation approach with a novel initialization method to solve natural gas pipeline transmission problems with the nonuniform network elevation. Previous approaches, such as energy minimization methods, cannot be applied to solve problems with the nonuniform network elevation because they exclude pressure range constraints, and thus provide solutions far from optimum. We propose a new initialization model that considers pressure range constraints and improves the optimality of the solutions and the computational efficiency. Furthermore, we extend the energy minimization methods and provide the necessary conditions under which the extended methods operate in networks with the nonuniform elevation. We test the performances of the methods with previously reported pipeline networks from the literature, with the open data set GasLib, and with our industrial collaborator. The initialization approach is shown to be more efficient than the method with fixed initial breakpoints. The newly proposed initialization approach generates solutions with a higher accuracy than the extended energy minimization methods, especially in large‐size networks. The proposed method has been applied to natural gas transmission planning by the China National Petroleum Corporation and has brought a direct profit increase of 330 million U.S. dollars in 2015‐2017.     

舰炮身管的模态分析与多目标优化

舰炮的炮口扰动是影响舰炮射击精度的重要因素。为了减少舰炮的炮口扰动,优化身管结构,建立了柔性身管的ABAQUS有限元模型,将有限元模型的模态计算值与模态试验值进行比较,发现建立的柔性身管有限元模型是合理可行的。提出了混沌量子粒子群算法与动力学联合优化的方法,进行身管和炮口的多目标优化。优化结果表明,优化后炮口中心的线速度、角速度和角位移与优化前相比显著减小,身管质量有所降低,结构更加合理,该优化方法有效可行,为下一步全炮总体优化设计提供了一定的借鉴。     

Stochastic production capacity: A bane or a boon for quick response supply chains?

The quick response (QR) system that can cope with demand volatility by shortening lead time has been well studied in the literature. Much of the existing literature assumes implicitly or explicitly that the manufacturers under QR can always meet the demand because the production capacity is always sufficient. However, when the order comes with a short lead time under QR, availability of the manufacturer's production capacity is not guaranteed. This motivates us to explore QR in supply chains with stochastic production capacity. Specifically, we study QR in a two-echelon supply chain with Bayesian demand information updating. We consider the situation where the manufacturer's production capacity under QR is uncertain. We first explore how stochastic production capacity affects supply chain decisions and QR implementation. We then incorporate the manufacturer's ability to expand capacity into the model. We explore how the manufacturer determines the optimal capacity expansion decision, and the value of such an ability to the supply chain and its agents. Finally, we extend the model to the two-stage two-ordering case and derive the optimal ordering policy by dynamic programming. We compare the single-ordering and two-ordering cases to generate additional managerial insights about how ordering flexibility affects QR when production capacity is stochastic. We also explore the transparent supply chain and find that our main results still hold.     

等离子体与高功率微波相互作用中电子分布特性

电子数密度是表征等离子体物理特性的一项重要因素,在等离子体与高功率微波的相互作用中,等离子体对入射电磁波的吸收、衰减和屏蔽等电磁特性可通过电子数密度的变化进行表征。基于等离子体流体近似研究方法,利用COMSOL软件求解等离子体中的波动方程、电子传递方程和重粒子传递方程,计算分析了等离子体与高功率微波相互作用中的电子分布特性,重点分析了相互作用中平均电子数密度和平均电子能的数值和空间分布变化过程。研究表明,在高功率微波作用下,等离子体区域电子数密度在数值上会产生剧烈的阶跃变化,形成雪崩效应,在空间分布上电子数密度峰值产生趋于入射方向移动的变化;电子能的变化与入射波激励和电子数密度相关,随入射激励增加呈增长趋势,随电子数密度的增加而减小。     

Study on dynamic response of multi-degree-of-freedom explosion vessel system under impact load

In order to study the dynamic response and calculate the axial dynamic coefficient of the monolayer cylindrical explosion vessel, the wall of vessel is simplified as a multi-degree-of-freedom (MDoF) undamped elastic foundation beam. Decoupling the coupled motion equation and using Duhamel's integrals, the solutions in generalized coordinates of the equations under exponentially decaying loads, square wave loads and triangular wave loads are calculated. These solutions are consistent in form with the solutions of single-degree-of-freedom (SDoF) undamped forced vibration simplified model. Based on the model, equivalent MDoF design method (also called MDoF dynamic coefficient method) of cylindrical explosion vessel is proposed. The traditional method can only predict the dynamic coefficient of torus portion around the explosion center, but this method can predict that of the vessel wall at any axial n dividing point position. It is verified that the prediction accuracy of this model is greatly improved compared with the SDoF model by comparing the results of this model with SDoF model and numerical simulation in different working conditions. However, the prediction accuracy decreases as the scaled distance decreases and approaches the end of the vessel, which is related to the accuracy of the empirical formula of the implosion load, the simplification of the explosion load direction, the boundary conditions, and the loading time difference.