基于SQP法的助推-滑翔导弹助推段弹道优化研究

轨迹优化是飞行器总体优化设计中的重要组成部分,它贯穿于飞行器的整个设计过程。高超声速助推-滑翔导弹的弹道优化问题涉及攻角、法向过载、最大动压等多种约束条件,是一种复杂的最优控制问题。序列二次规划法（SQP）是解决该类问题行之有效的数值优化方法。本文利用SQP算法对助推-滑翔导弹助推段进行弹道优化,为这一高超声速飞行器的整体结构设计提供了有益的参考。     

Quantification of projection angle in fragment generator warhead

Tactical Ballistic Missile (TBM) class target neutralization by the fragment spray of a Fragment Generator Warhead (FGW) calls for quantification of fragment projection angle scatter to finalize the end game engagement logic. For conventional axi-symmetric warhead, dispersion is assumed to be normal with a standard deviation of 3⁰. However, such information is not available in case of FGW. Hence, a set of experiments are conducted to determine the dispersion of fragments. The experiments are conducted with a specific configuration of FGW in an identical arena to quantify the scatter and then verified its applicability to other configurations having a range of L/D and C/M ratios, and contoured fragmenting discs. From the experimental study, it is concluded that the scatter in projection angle follows normal distribution with a standard deviation of 0.75° at Chi-square significance level of 0.01(χ²_0.99).     

Biased retro-proportional navigation law for interception of high-speed targets with angular constraint

A new guidance law, called biased retro proportional navigation (BRPN), is proposed. The guidance law is designed to intercept high-speed targets with angular constraint, which can be used for ballistic target interception. BRPN guidance law is defined, and the exact time-varying bias for a required impact angle is derived. Furthermore, the simulation results (trajectory, variation of navigation ratio, capture region, etc) are compared with those of biased proportional navigation (BPN), proportional navigation and retro-proportional navigation. The results show that, at the cost of a higher intercept time, BRPN demands lower terminal lateral acceleration and has larger capture region compared to BPN.     

考虑几何及力和力矩非线性时弹丸运动方程的研究

从矢量形式的六自由度弹丸运动方程组出发,推导出了在全部力和全部力矩作用下考虑几何非线性及力和力矩非线性时的弹丸运动方程组,并导出了其用于数值计算的柯西标准形式,得到了攻角和进动角的计算表达式.此动力学模型可用于弹丸大攻角飞行时的弹道计算及某些灵巧弹药(如末敏弹)的设计.     

拦截高速机动目标的捕获区及微分对策导引律

针对高速机动目标拦截场景,研究末制导段捕获区存在条件及微分对策导引律问题.建立弹目相对运动模型并引入控制动力学模型,采用终端投影方法对相对运动模型进行降阶处理;基于微分对策理论推导一种解析形式捕获区,并具体到直/气复合控制导弹对机动目标的拦截中,该捕获区的存在能够保证对任意机动目标进行准确捕获;重新选取性能指标,将目标...     

圆柱形装药驱动轴向预制破片飞散特性

为了增强柱形战斗部轴向威力,在无壳柱形战斗部底面布置单层离散的预制破片.开展圆柱形TNT装药驱动轴向预制破片飞散试验,获得预制破片的最大初速、飞散角等特征参数;运用LS-DYNA软件对装药驱动预制破片过程进行数值模拟,阐述预制破片群飞散过程;对装药驱动整体平板理论计算公式进行改进,获得预制破片的最大初速.结果表明:破片...     

无奇点三维攻击时间控制滑模导引律

为研究导弹在视场角约束下的三维攻击时间控制问题,提出一种三维非线性滑模导引律.利用攻击时间误差设计滑模面,推导出三维形式的俯仰和偏航加速度指令;通过对所设计制导律进行简单修正,解决了零初始前置角引起的奇点问题;从数学上证明了该导引律的稳定性和收敛性,讨论了导引律相关参数的取值范围,分析了与纯比例导引法、解耦三维导引律之...     

数字伺服系统中角的表示方法

介绍了数字伺服系统中用十六位二进制数表示角的方法和误差角的计算。使数字伺服系统设计者从根本上树立角与数关系的正确看法,从而有助于正确、简练地设计控制算法程序。     

榴弹射表编拟中最佳符合射角的确定及射表精度对比

对在不同射角下符合时,由射表误差源造成的射程误差和偏流误差进行了计算与分析,论述了符合射角选择的合理区域。通过综合考察各种因素对于射表误差的影响,提出了以45°射角作为最佳符合射角的方案。同时模拟对比了分别采用新方法编表和传统方法编表时的射表精度.结果表明,尽管新方法的编表所需符合射角由原来的5个以上减少为1个,但编表精度却反而提高。     

GPS／平台式静电陀螺找北仪组合系统研究

提出了ＧＰＳ／平台式静电陀螺找北仪组合系统方案。它具有找北精度高、机动性强、对准时间短、能实时辨识陀螺漂移模型等特点,是实现自主找北的一种新方案,具有实用价值。