不同海拔富氧进气柴油机富氧经济性分析

建立了高海拔条件下柴油发动机富氧进气燃烧排气氧气体积分数与进气氧气体积分数关系的模型,对海拔2 000,3 000和4000m处不同转速时发动机富氧进气的燃烧状况和富氧经济性进行研究.结果表明:模型预测结果与试验结果吻合较好,当发动机正常进气过量空气系数α＜1.2时,富氧进气改善发动机燃烧状况的效果明显.发动机富氧进气...     

无灰型柴油添加剂的灰模式关联决策

由于无灰型柴油添加剂不存在二次污染问题,将是节能降污柴油添加剂发展的趋势,但是无灰型添加剂的加入可能会改变燃油多项理化指标和发动机台架评定结果,采用灰模式关联决策在众多添加剂中确定最优无灰型添加剂是一种较为科学的方法.通过对含有无灰型柴油添加剂油样的各项理化指标测试、模拟评价测试和发动机台架试验结果进行灰模式关联决策,...     

动力伞8自由度动力学建模与仿真

现有文献中的翼伞建模方法多数是针对不带动力情况下的翼伞建模,不能适应动力翼伞的飞行控制。为了实现动力伞的有效控制,首先要建立合理的动力学模型。假设翼伞承载物和软翼之间具有2个自由度,分别建立软翼和承载物体坐标系下的作用力和力矩的平衡方程,通过体坐标系转换和消除翼伞内部状态量,得到有利于实现翼伞控制的8自由度非线性状态方程。仿真表明模型的飞行曲线与飞行实验的结果相一致,验证了模型的有效性。     

基于Multi-Agent的防空导弹武器系统模型设计

建立科学的结构模型是进行防空导弹武器系统仿真的基础和关键环节。针对防空导弹武器系统的特点,提出了基于Multi-Agent的防空导弹武器系统模型建模方法,设计了防空导弹武器系统模型结构。利用Multi-Agent建模技术,把防空导弹武器系统实体映射成相应的Multi-Agent系统,并以Agent的形式对防空导弹武器系统这一客观复杂系统进行了深刻的认识,为防空导弹武器系统建模仿真奠定了基础。     

航空磁探仪目标运动分析仿真研究

针对航空磁探仪目标运动分析问题,分析了目标运动要素确定方法。首先,采用蒙特卡洛仿真和统计分析法研究了目标运动要素估计误差的分布规律;然后,结合最小二乘定位法,给出了目标运动参数及其误差的简化算法;最后,分析了影响目标运动要素解算精度的主要因素。研究结果可为磁探仪的使用、攻潜武器的选择和攻潜效果的预测提供参考。     

5GHz雷达的干扰计算模型概述

文章从开发5 GHz模型的目的入手,简要介绍了5 GHz模型的结构组成,详细讨论了5 GHz模型的干扰计算流程,包括无线局域网和雷达的场景设置、技术参数设置、总干扰计算等,最后给出了5 GHz模型的一个运行范例,以期为其它干扰模型的开发提供借鉴参考。     

Numerical modelling of non-ideal detonation in ANFO explosives applying Wood-Kirkwood theory coupled with EXPLO5 thermochemical code

Ammonium nitrate and fuel oil (ANFO) based explosive is a classic example of non-ideal high explosives. Its detonation is characterized by a strong dependence of detonation parameters on explosive charge diameter, presence and characteristics of confinement, as well as incomplete consumption of explosive at the sonic point.In this work we propose a detonation model based on the Wood-Kirkwood (WK) theory coupled with the thermochemical code EXPLO5 and supplemented with reaction rate models. Our objective is to analyze the validity of the model for highly non-ideal ANFO explosives, with emphasis on effect of reaction rate models.It was found that both single-step and two-step pressure-based models can be calibrated to reproduce experimental detonation velocity-charge radius data of ANFO at radii significantly above the failure radius (i.e. for D/D_id > ∼0.6). Single-step pressure-based model, with the pressure exponent equal to 1.4, proved to be the most accurate, even in the vicinity of the failure radius. The impact of the rate models is most evident on temporal (and spatial) distribution of flow parameters in detonation driving zone, especially when it comes to the conversion and width of detonation driving zone.     

Transverse relaxation characteristic and stress relaxation model considering molecular chains of HTPB coating based on pre-strained thermal aging

In order to accurately describe the transverse relaxation characteristic and stress relaxation modulus of HTPB coating during pre-strain thermal aging process, a one month thermal aging test was carried out at 70 C with pre-strain of 0％, 3％, 6％ and 9％, respectively. The low-field 1H NMR and stress relaxation modulus tests were carried out for HTPB coating at different aging stages. The stress relaxation model considering the molecular chains was proposed according to the changes of crosslinking chain and dangling chain of HTPB coating during pre-strain aging. The results showed that with the increase of aging time, the decay rate of transverse relaxation curve became faster, the transverse relaxation time decreased, the value of combined parameter qMrl increased, the proportion of crosslinking chain decreased, while the proportion of dangling chain increased. Moreover, the stress relaxation modulus increased, the crosslinking network structure of HTPB coating became denser and the degree of cross-linking increased. At the initial aging stage, the pre-strain will destroy the crosslinking network structure of HTPB coating to a certain extent. With the increase of aging time, the effect of pre-strain will gradually weaken and the influence of aging on materials will gradually increase. The correlations between the stress relaxation model considering the molecular chains and the test results were more than 0.9950, which can accurately describe the stress relaxation modulus of HTPB coating during the pre-strain thermal aging process.     

多传感器多机动目标跟踪方法研究进展

讨论了多传感器多机动目标的研究现状,分析了几种跟踪滤波器的性能,着重探讨了交互多模型(IMM)算法的发展状况和应用。同时还研究了多传感器跟踪多机动目标过程中的数据关联方法。最后指出,寻求采用自适应变结构的IMM算法,研究模型切换过程中算法的过渡性能,以及在数据关联中引入混沌、遗传算法等智能控制方法,将是未来多传感器多机动目标研究的方向。