节点实时性能自适应的集群资源分配算法

由于配置和所运行作业的不同,集群各节点的实时性能差异较大。为提高集群性能,提出节点实时性能自适应的集群资源分配算法 (node real-time performance adaptive cluster resource scheduling algorithm,NPARSA)。节点实时性能用其配置(CPU核数及速度、内存容量、磁盘容量)和实时状态参数(CPU、内存和磁盘的剩余数量及磁盘读写速度)表示。NPARSA根据作业类型自主选择节点性能评价指标的权值,实现节点实时性能对于作业类型的自适应。实时性能最优的节点分配给作业。虚拟机实验和物理集群实验表明,与Spark默认资源分配算法、没有考虑作业类型与节点匹配的算法、使用作业和节点匹配差异程度作为资源分配依据的算法相比,NPARSA能更有效地缩短作业执行时间、提高集群性能。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。     

新型舰炮使用测速雷达后观测距离偏差射击校正方法

针对测速雷达精确校正初速后的观测距离偏差校正方法进行研究,建立不同校正方法校正量计算模型,对比分析不同校正方法校正精度,得出了使用测速雷达精确校正初速后观测距离偏差应采用折合空气密度校正精度高的结论,为中大口径舰炮部队作战与训练和装备的研制改进提供依据。     

嵌入式实时操作系统性能测试方法

为综合评价操作系统能否满足使用要求,研究了一种定量测试嵌入式实时操作系统功能和性能的方法,提出了具体的测试项目、测试环境和测试用例的要点,给出一种基于外部注入的功能测试、性能测试、应用测试方法及具体实现。测试结果证明,该方法对提高软件质量,缩短研制周期,增强可维护性等方面有显著效果。     

舰炮对岸应召射击最优火力分配

针对舰炮射击特点,分析了海上射击误差,探讨了集群目标的简化处理方法,给出了最优火力分配时表尺差和弹药消耗量计算模型,并进行了举例分析。利用最优火力分配方法来计算舰炮效力射表尺差和弹药消耗量,避免了指挥员战场射击指挥的盲目性,可以在相同弹药消耗量情况下取得最佳射击效果。     

动态弹道补偿

通常意义下的弹道补偿没有考虑火炮摆动对射击的影响,因而在坦克运动或目标运动时,命中概率将大大降低.分析了由火炮摆动带来的射击误差,给出了相应的补偿算法及电路的实现方法.     

机载武器控制系统算法研究

机载武器控制系统的算法是其软件部分的核心,算法的最终目的是保证在一定的条件下实现最有利的武器运用方案。将机载武器控制系统的算法分为四个不同的子算法,对每一子算法的建立方法进行了描述,最后得到形成执行命令的算法,即武器运用方案执行命令分配及形成的算法。     

游标卡尺实验中值得注意的几个问题

对游标卡尺实验中普遍存在的问题进行了分析与讨论 ,并给出了合理的解释。