适用于公共安全领域的多功能警用无人旋翼机

与直升机和固定翼相比,无人旋翼机对起飞场地的要求较低,具有低能耗、高功效、不易受环境因素影响等优点,适合安保部队的任务需要。为了进一步提高其作战性能,以无人自转旋翼机为平台,添加多种操作功能,完成宣传威慑、高空监控、杀伤性与非杀伤性攻击等任务,进而实现无人自转旋翼机的多功能化。     

光纤激光水听器的PGC实时全数字解调系统

概述了基于麦克尔逊干涉仪的光纤激光水听器的相位载波零差法(PGC)调制解调原理,通过数学推导及仿真,分析了调制信号和混频信号的频差是导致全数字化解调结果错误的主要因素之一。针对该诱导因素提供了可行的解决方案,并实现了基于DSP的1 MHz采样频率下使用PGC方法的全数字实时解调系统。对低频水声波段800Hz水声信号进行解调,实验结果表明:解调信号波形良好。     

考虑Reissner效应的功能梯度柱壳裂纹高阶渐近场

针对考虑Reissner效应的功能梯度柱壳裂纹问题,通过分离变量和级数展开法构造广义位移函数,求得了裂纹尖端高阶渐近场。结果表明：该解类似于Williams解,为此类问题的特征函数,能够描述此类材料各种含裂纹结构的整个应力场和位移场;材料非均匀性对高阶项有显著影响。     

基于一维距离像的导弹目标运动特征提取方法

根据导弹目标运动方式及其回波特点,提出了一种基于一维距离像的运动目标特征提取方法。在对回波进行全去斜率处理后获得目标一维像。通过观测一维像序列的长度变化周期,提取目标的章动频率;根据距离像在成像窗口中的位置,获取雷达和目标的径向距离;利用相邻距离像相关方法,获取距离像平移位置,从而推出雷达—目标的径向速度。进行了相应的仿真实验,结果表明了该方法的有效性。     

旋成体跨音速脉动压力环境分析与预测

脉动压力是进行结构响应分析和力学环境研究的重要依据。利用平均流场的数值模拟方法与基于实验的工程预测模型相结合的技术途径,对跨音速下旋成体的表面脉动压力环境进行了分析与预测,给出了旋成体在不同攻角、不同马赫数条件下表面脉动压力系数分布以及脉动压力功率谱分布曲线,并且与实验结果作了比较分析,得出结论基本一致。     

InSb纳米颗粒的制备与原子力显微镜

为进一步研究半导体纳米材料的物理特性,用真空沉积的方法在SiO2基片上制备了纳米InSb颗粒膜。用原子力显微镜扫描样品表面的分析显示,纳米InSb颗粒均匀地分布在SiO2基片表面。实验结果表明通过改变镀膜时间,可以得到具有不同颗粒尺寸的InSb纳米颗粒。     

二维超声速空气引射器启动特性试验研究

（静）超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据：当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

高温燃气与不同构型的再生冷却面板对流传热的数值模拟

对高温燃气与带有平行冷却通道的再生冷却面板之间的三维耦合传热开展了数值研究,其中冷却通道内冷却剂为超临界压力煤油,并结合理论分析探讨了冷却面板构型对耦合传热的影响。结果表明:随燃气侧壁厚以及冷却通道宽度和高度的增大,燃气侧壁面温度升高,热流密度降低。研究还发现:冷却通道不同壁面传递给煤油的热量占比几乎不随燃气侧壁厚变化,但随冷却通道宽度和高度的改变而变化。     

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

In order to study the influences of confining pressure and strain rate on the mechanical properties of the Nitrate Ester Plasticized Polyether (NEPE) propellant, uniaxial tensile tests were conducted using the self-made confining pressure system and material testing machine. The stress-strain responses of the NEPE propellant under different confining pressure conditions and strain rates were obtained and analyzed. The results show that confining pressure and strain rate have a remarkably influence on the mechanical responses of the NEPE propellant. As confining pressure increases (from 0 to 5.4 MPa), the maximum tensile stress and ultimate strain increase gradually. With the coupled effects of confining pressure and strain rate, the value of the maximum tensile stress and ultimate strain at 5.4 MPa and 0.0667 s⁻¹ is 2.03 times and 2.19 times of their values under 0 MPa and 0.00333 s⁻¹, respectively. Afterwards, the influence mechanism of confining pressure on the NEPE propellant was analyzed. Finally, based on the viscoelastic theory and continuous damage theory, a nonlinear constitutive model considering confining pressure and strain rate was developed. The damage was considered to be rate-dependent and pressure-dependent. The constitutive model was validated by comparing experimental data with predictions of the constitutive model. The whole maximum stress errors of the model predictions are lower than 4% and the corresponding strain errors are lower than 7%. The results show that confining pressure can suppress the damage initiation and evolution of the NEPE propellant and the nonlinear constitutive model can describe the mechanical responses of the NEPE propellant under various confining pressure conditions and strain rates. This research can lay a theoretical foundation for analyzing the structural integrity of propellant grain accurately under working pressure loading.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.