高性能炸药综合性能的多维评估

基于欧几里得几何距离的概念,给出了一种炸药综合性能的多维空间评估方法。这种方法在确定炸药理想方案和最差方案的基础上,综合考虑了各种炸药方案与理想方案和最差方案的欧几里得几何距离,以此评估炸药综合性能。     

民用炸药生产的消防安全管理

分析了现阶段民用炸药生产的特性,提出民爆企业生产中防火、防爆的消防管理措施。根据炸药生产工序的相对稳定性,做好事故预防,加强生产中的消防安全管理。     

A melt-cast Duan-Zhang-Kim mesoscopic reaction rate model and experiment for shock initiation of melt-cast explosives

A melt-cast Duan-Zhang-Kim (DZK) mesoscopic reaction rate model is developed for the shock initiation of melt-cast explosives based on the pore collapse hot-spot ignition mechanism. A series of shock initiation experiments was performed for the Comp B melt-cast explosive to estimate effects of the loading pressure and the particle size of granular explosive component, and the mesoscopic model is validated against the experimental data. Further numerical simulations indicate that the initial density and formula proportion greatly affect the hot-spot ignition of melt-cast explosives.     

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

Numerical study on the case effect of a bomb air explosion

When considering the bomb explosion damage effect, the air shock wave and high-speed fragments of the bomb case are two major threats. In experiments, the air shock wave was studied by the bare ex-plosives superseding the real cased bomb; in contrast, the bomb case influence was ignored to reduce risk. The air explosion simulations of the MK84 warhead with and without the case were conducted. The numerical simulation results showed that the bomb case significantly influenced the shock wave generated by the bomb: the spatial distribution of shock wave in the near field changed, and the peak value of shock wave was reduced. Breakage of the case and kinetic energy of the fragmentation consumed 3 and 38% of the explosion energy, respectively. The increasing factors of the peak over-pressure induced by the bare explosive on the ground and in the air were 1.43-3.04 and 1.37-1.57, respectively. Four typical stages of case breakage were defined. The mass distribution of the fragments follows the Mott distribution. The initial velocity distribution of the fragments agreed well with the Gurney equation.     

不同网栅结构对MEFP成型影响的对比分析

为了研究不同形状网栅结构对形成的MEFP破片的影响,利用LS-DYNA动力有限元程序,采用Lagrangian方法,分别对十字形网栅切割式MEFP战斗部、星形线形网栅切割式MEFP战斗部、中心圆环形网栅切割式MEFP战斗部、井字形网栅切割式MEFP战斗部成型过程进行了数值模拟研究,并对影响各自破片成型及发散角的因素进行了分析研究。通过对不同方案网栅切割式MEFP速度及散布面积对比分析,结果表明:采用井字形网栅产生的破片集聚性优于十字形、星形线形和中心圆环形结构方案。     

爆电换能的理论分析

考虑了铁电介质的介电松弛和电导率松弛,计及冲击波阵面在样品中传播过程的影响,改进了垂直模式冲击波加载铁电陶瓷电响应的理论,且理论分析与实验结果基本一致。     

Fragment spatial distribution of prismatic casing under internal explosive loading

Non-cylindrical casings filled with explosives have undergone rapid development in warhead design and explosion control. The fragment spatial distribution of prismatic casings is more complex than that of traditional cylindrical casings. In this study, numerical and experimental investigations into the fragment spatial distribution of a prismatic casing were conducted. A new numerical method, which adds the Lagrangian marker points to the Eulerian grid, was proposed to track the multi-material interfaces and material dynamic fractures. Physical quantity mappings between the Lagrangian marker points and Eulerian grid were achieved by their topological relationship. Thereafter, the fragment spatial distributions of the prismatic casing with different fragment sizes, fragment shapes, and casing geometries were obtained using the numerical method. Moreover, fragment spatial distribution experiments were conducted on the prismatic casing with different fragment sizes and shapes, and the experimental data were compared with the numerical results. The effects of the fragment and casing geometry on the fragment spatial distributions were determined by analyzing the numerical results and experimental data. Finally, a formula including the casing geometry parameters was fitted to predict the fragment spatial distribution of the prismatic casing under internal explosive loading.     

铝合金-纯铝-钢复合板爆炸焊接试验及性能研究

通过设计爆炸焊接试验复合了铝合金-纯铝-钢爆炸复合板,对其界面形态、显微硬度及力学性能进行了研究。结果表明,铝合金-纯铝界面纯规则正弦波形,纯铝-钢复合板界面波形较小,铝合金-纯铝-钢复合板的界面剪切强度在75 MPa以上,爆炸复合过程中,纯铝与钢界面生成了金属间化合物,其界面处基体金属发生强烈的塑性变形。复合板变形及组织变化的结果造成复合板界面处的显微硬度最高,随着距界面距离的增加,两侧基体金属的硬度逐渐降低。     

纵火战斗部爆炸分散仿真研究

在试验的基础上,从炸药对纵火炬的驱动和纵火炬在空中飞散两个方面,对其在战斗部静爆和动态飞行时的爆炸分散进行了仿真研究,研究结果对纵火弹的具体设计具有重要的参考价值。