计算机网络级联失效建模与分析

针对以往级联失效模型负载局部重分配规则与现实计算机网络全局路由特点不吻合的缺陷,模拟网络中信息流传输过程。定义路由器的失效条件,建立基于负载全局重分配的级联失效模型,并在此基础上提出基于连通和性能两方面的级联失效影响评价参数,进而分析用户流量和攻击方式对计算机网络级联失效的影响。结果表明,随着流量的增大,级联失效存在相变行为,相变点刻画了网络在不会发生级联失效前提下的最大传输能力。此外,针对网络中高度节点的攻击,更为容易引发大规模的级联失效,应予以重点保护。     

多爆炸成型弹丸性能参数灰关联分析

为了获得各参数对多爆炸成型弹丸毁伤性能的影响程度,以EFP速度和MEFP发散角为参考序列,以药型罩和装药参数为比较序列,运用灰关联理论对影响MEFP毁伤性能的参数进行了灰关联分析。在此基础上,应用灰关联分析结果完成了MEFP战斗部优化设计。结果表明:在较少样本空间前提下,采用灰关联理论可以分析获得影响多爆炸成型弹丸毁伤性能的各因素主次关系,而且经过优化后的MEFP战斗部,大大地提高了EFP的集聚性和毁伤性能。     

压剪加载下炸药装药中剪切带形成与发展模型

研究了在压剪加载下炸药这类粘塑性介质中剪切带的形成与发展。提出了一种反映炸药装药中剪切带形成和发展的计算方法,并分析了剪切带发展变化特性与炸药起爆的关系     

拉压异性材料具有圆孔的无限大薄板的极限分析

利用莫尔屈服准则,对拉压异性材料具有圆孔的无限大薄板进行了极限分析。计算结果表明,材料的拉压异性对结构的极限承载能力和弹塑性状态都有明显的影响。考虑了材料拉压异性的影响,分析结果更具一般性。     

基于NNLI技术的齿轮箱故障诊断

将NNLI技术应用到齿轮箱的故障诊断中,提出了基于NNLI的特征提取方法,并将该方法与神经网络结合起来,进一步提出基于NNLI特征提取的神经网络故障诊断方法,给出了两种不同的网络分类器,通过齿轮箱故障诊断实例验证了该方法的有效性。     

子母式穿甲弹子弹发射过程研究

对子母式穿甲弹子弹的发射过程进行详细的分析,得出了子弹长度与子弹飞离母弹速度的关系、子弹长度与火药燃烧率的关系、子弹长度与母弹弹头部发射孔内最大压力的关系以及子弹的长度与子弹发射所需时间的关系,为子母式穿甲弹设计提供了依据。     

基于BP神经网络带调压器直流发电机特性的辨识

为使坦克直流发电机的调压特性实验能够在计算机上仿真进行,节约教学实验成本,可利用神经网络对直流发电机的调压特性进行辨识,得到了比手工绘制精度更高的特性曲线.因此,调压特性的神经网络辨识法,有利于直流发电机特性实验教学.     

Field test and probabilistic analysis of irregular steel debris casualty risks from a person-borne improvised explosive device

Person-borne improvised explosive devices (PBIEDs) are often used in terrorist attacks in Western countries. This study aims to predict the trajectories of PBIED fragments and the subsequent safety risks for people exposed to this hazard. An explosive field test with a typical PBIED composed of a plastic explosive charge and steel nut enhancements was performed to record initial fragment behaviour, including positions, velocity, and trajectory angles. These data were used to predict the full trajectory of PBIED fragments using a probabilistic analysis. In the probabilistic analyses a probability of fatality or serious injury was computed. Based on the results presented, many practical conclusions can be drawn, for instance, regarding safe evacuation distances if a person were exposed to a suspected PBIED.     

基于ANSYS的舰船武器装备基准变化分析方法

舰船武器装备基准在外界环境作用下产生变化,从而影响武器系统的打击精度。应用ANSYS平台建立舰船有限元模型,利用三维波浪载荷的计算方法模拟航行条件下的波浪力,研究了舰船甲板面武器装备基准在两种极限海况下的变化情况,发现针对此类舰船横摇使武器装备基准产生较大的变化,并且靠近尾部和两舷位置处装备的基准变化较为显著。仿真结果表明：当舰船在风浪中航行使用武器系统时,应尽量采取顶浪航行,减少舰船横摇对武器系统基准的影响。     

Countering the effects of IED systems in Afghanistan: an integral approach

The current approach to countering the threat of improvised explosive devices (IEDs) in Afghanistan has met with limited success. The relative lack of success may be in part because the current approach is not holistic and discounts the social systems that foster the IEDs. Insurgents are using IEDs as a tool to further their strategic aims, but the coalition and to a lesser extent the Government of the Islamic Republic of Afghanistan (GIRoA) are attacking the IEDs as if they are an end in and of themselves. Combining network disruption with information change maximizes the opportunities for mitigating the IED threat. More specifically, to mitigate the IED threat requires disrupting the social and economic systems associated with IEDs, and at the same time providing alternative economic opportunities and improving rule of law and governance at the local level. In other words, counter-IED (C-IED) must be Counter-Insurgency (COIN) centric to be successful. This paper reviews the current state of C-IED efforts, identifies five main problems with the current approach, and suggests changes to reduce or mitigate the IED threat in Afghanistan.