Interval uncertain optimization for damping fluctuation of asegmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer (EMB) caused by high ve-locity under intensive impact load and the difficulty and error of machining composite thin-walled long tube, a segmented EMB is proposed. The inner tube and air-gap are divided into initial segments and the traversing segments. Through theoretical analysis, impact test and simulation, it can be found that the RRF curve has two peaks. Firstly, in order to reduce the resultant resistance force (RRF) peaks, the sensitivity analysis based on optimal Latin hypercube design (OLHD) and polynomial regression was performed. The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube, which are less than 1％. Then, fully considering the uncertain factors, important parameters are selected for uncertain optimization after sensitivity analysis. The in-terval order and interval probability degree methods are used to establish interval uncertain optimiza-tion model of the RRF considering robustness. The model was solved using an interval nested optimization method based on radial basis function (RBF) neural network. Finally, the Pareto front is obtained and numerical simulation is performed to verify the optimal value. It indicates that the two kinds of RRF peak is obviously reduced, and the optimization object and strategy are effective.     

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

Numerical study on the case effect of a bomb air explosion

When considering the bomb explosion damage effect, the air shock wave and high-speed fragments of the bomb case are two major threats. In experiments, the air shock wave was studied by the bare ex-plosives superseding the real cased bomb; in contrast, the bomb case influence was ignored to reduce risk. The air explosion simulations of the MK84 warhead with and without the case were conducted. The numerical simulation results showed that the bomb case significantly influenced the shock wave generated by the bomb: the spatial distribution of shock wave in the near field changed, and the peak value of shock wave was reduced. Breakage of the case and kinetic energy of the fragmentation consumed 3 and 38% of the explosion energy, respectively. The increasing factors of the peak over-pressure induced by the bare explosive on the ground and in the air were 1.43-3.04 and 1.37-1.57, respectively. Four typical stages of case breakage were defined. The mass distribution of the fragments follows the Mott distribution. The initial velocity distribution of the fragments agreed well with the Gurney equation.     

飞行器点火爆炸通用测量装置的设计

针对飞行器试验用点火器的通用测量装置,提出了一种柱形爆炸容器的设计方法,从容器壁厚、反射超压、应用材料、容器结构以及点火器爆炸当量等方面进行考虑,计算柱形爆炸容器的压力瞬间载荷,并利用COSMOS Works软件进行应力仿真,最后通过实际飞行试验环节进行验证,回收采集系统所记录的试验数据并间接分析出点火器的工作状态,结果表明:试验结果和理论分析完全吻合,容器设计合理,从而为飞行器研制试验用点火器驱动动力装置提供必要的数据参考和支撑。     

基于改进Morison公式的海上漂浮软管波浪载荷计算

针对海上漂浮软管波浪载荷计算,分析了软管在海上的形态和受力特点,建立了海上漂浮软管力学分析模型,指出直接运用现有Morison方程计算漂浮软管波浪载荷存在的不足,并根据基本原理提出了改进Morison方程。对海上软质管线处于一定海况,分别运用改进Morison方程与现有Morison方程计算海上波浪载荷,并运用ANSYS软件建立软管模型,结果表明现有Morison方程不适用于计算海上漂浮软管波浪载荷,载荷计算结果偏高约15%,从而验证了改进Morison方程的精确性,有利于准确分析波浪载荷对海上漂浮软管的作用情况。     

利用循环网络的降落伞开伞载荷补偿方法

为了对降落伞充气展开过程中的开伞载荷进行更加准确的预测,提出一种基于循环神经网络的开伞载荷补偿计算方法,包括模型架构和数据处理方式。该方法将充气时间法计算的预测值代入循环网络进行二次计算,使最终结果能够更加贴近试验真值。使用多层前馈网络、标准循环网络与长短时记忆网络三种网络进行比较,验证了所提模型预测结果的适用性和准确性,研究了学习率、输入层维度和隐层维度等超参数对模型性能的影响,并给出了基于长短时记忆网络的补偿模型最优训练条件。实验结果表明,利用循环网络进行开伞载荷预测具有较好的拟合结果,为机器学习与降落伞工业的学科交叉研究提供了一定的参考方向。     

Explosion temperature mapping of emulsion explosives containing TiH2 powders with the two-color pyrometer technique

In the study, the two-color pyrometer technique was used to measure the transient temperature field of emulsion explosives with different contents of TiH₂ powders. The experimental results showed that the introduction of TiH₂ powders could significantly increase the explosion temperature and fireball duration of emulsion explosive. When emulsion explosives were ignited, the average explosion temperature of pure emulsion explosive continuously decreased while emulsion explosives added with TiH₂ powders increased at first and then decreased. When the content of TiH₂ powders was 6 mass%, the explosion average temperature reached its maximum value of 3095 K, increasing by 43.7% as compared with that of pure emulsion explosive. In addition, the results of air blast experiment and explosion heat test showed that the variation trends of shock wave parameters, explosion heat and theoretical explosion temperature of emulsion explosives with different contents of TiH₂ powders were basically consistent with that of explosion temperature measured by the two-color pyrometer technique. In conclusion, the two-color pyrometer technique would be conducive to the formula design of emulsion explosive by understanding the explosion temperature characteristics.     

预制缺陷柱壳结构的等效裂纹分析方法

针对传统有限元法在分析预制缺陷柱壳时出现的应力/应变计算精度不足、无法有效指导工程实践的问题,提出了一种具有高冗余度的等效裂纹分析方法。将预制缺陷视作典型裂纹,基于奇异裂纹元法对其进行裂纹稳定性分析,并根据稳定性分析结果来评估预制缺陷柱壳的结构完整性。通过该方法得到的分析结果具有比常规有限元分析更高的可靠性,对于导弹线式爆炸分离装置等工作环境恶劣、风险系数较高的预制缺陷柱壳结构而言,该方法有助于提升其设计的安全裕度,具有一定的工程实用性。     

基于重构相空间AD-SVM的短期电力负荷预测

利用重庆市九龙坡区电网2009年7月1日000-10月8日4：00 99 d共2 380个历史电力负荷数据,分析其特点和规律.将构建混沌理论的平均位移（AD）法和支持向量机（SVM）相结合,提出了一种新的短期电力负荷预测模型.通过仿真计算,将结果与神经网络法预测结果进行对比,可得新方法能较好反应数据变化趋势,并且具备较好的拟合能力,能够提高负荷预测精度.在实际短期电力负荷预测中,可优先选用平均位移法与支持向量机相结合的新方法.     

一种软启动／软关断电子开关设计

介绍了一种具有软启动／软关断功能的电子开关模块,该电子开关以功率器件BTS555为核心,辅以软启动／软关断电路,可以实现电机类感性负载的软启动／软关断功能,有利于抑制电动机的启动电流,减小供电电网的电压波动,改善供电质量。同时,设计的采样电路可以精确测量电压、电流信号,有利于电网的智能化控制和故障自诊断。