Verification and validation of detonation modeling

The mathematical model used to describe the detonation multi-physics phenomenon is usually given by highly coupled nonlinear partial differential equations. Numerical simulation and the computer aided engineering (CAE) technique has become the third pillar of detonation research, along with theory and experiment, due to the detonation phenomenon is difficult to explain by the theoretical analysis, and the cost required to accredit the reliability of detonation products is very high, even some physical experiments of detonation are impossible. The numerical simulation technique can solve these complex problems in the real situation repeatedly and reduce the design cost and time stunningly. But the reliability of numerical simulation software and the serviceability of the computational result seriously hinders the extension, application and the self-restoration of the simulation software, restricts its independently innovational ability. This article deals with the physical modeling, numerical simulation, and software development of detonation in a unified way. Verification and validation and uncertainty quantification (V&V&UQ) is an important approach in ensuring the credibility of the modeling and simulation of detonation. V&V of detonation is based on our independently developed detonation multi-physics software-LAD2D. We propose the verification method based on mathematical theory and program function as well as availability of its program execution. Validation is executed by comparing with the experiment data. At last, we propose the future prospect of numerical simulation software and the CAE technique, and we also pay attention to the research direction of V&V&UQ.     

状态X~2检验法在联邦滤波器中的应用

针对联邦滤波器的特殊性,基于残差故障统计检验原理,详细研究了状态检验法应用时存在的几个问题。由于信息分配,造成子滤波器局部估计次优,从而基于残差的故障统计检验方法不能够直接使用;针对这一问题,修正了残差方差阵的计算方法,并提出一种次优自适应补偿方法,能够有效改善局部估计次优性对故障检测灵敏度的影响。最后的仿真结果表明了研究的有效性和可行性。     

基于状态观测器的混沌系统鲁棒同步设计

研究了在有界干扰情况下一类非线性反馈混沌系统的鲁棒同步状态观测器设计问题。基于Sylvester矩阵方程的参数化解,将非线性反馈混沌系统的鲁棒同步状态观测器设计问题转化为带有约束条件的优化问题,通过解决该优化问题得到鲁棒同步状态观测器的增益矩阵,从而达到了干扰信号解耦目的。数值算例及其仿真结果表明:该非线性反馈混沌系统的鲁棒同步状态观测器的设计方法是简单有效的。     

基于角色的仿真动态建模研究

提出的基于角色的仿真建模方法,详细论述了该方法的建模过程与步骤,阐述了利用角色来达成建模的本质。典型仿真应用表明,该方法在建立仿真动态模型方面是有效可行的,且其具有良好的通用性、封装性、异步并发性及多分辨率特性,能够很好地解决日益复杂的仿真动态模型的建模问题。     

脉冲偏压离子镀的研究现状

脉冲偏压电弧离子镀的成膜过程远离热力学平衡态,与直流偏压电弧离子镀相比,具有成膜温度低、薄膜质量好和应力低等优点。从大颗粒净化作用、低温沉积、沉积速率、微观组织结构、内应力与结合强度、硬度等方面,综述了近年来脉冲偏压对薄膜性能影响的研究结果,重点讨论了机理方面的新成果,综述了脉冲偏压电源的研究状况,并对脉冲偏压电弧离子镀技术的应用前景进行了展望。     

支持向量机在柴油机技术状况评估中的应用

介绍了现有的柴油机技术状况评估方法,分析了这些方法的局限性和支持向量机在处理小样本、非线性、高维数等方面的优势。提出了基于支持向量机的柴油机技术状况评估模型。确定了能够表征柴油机技术状况变化的特征,并通过实车试验提取这些特征;构建了基于支持向量机的柴油机技术状况评估模型,并对部分试验车辆柴油机进行了评估。结果证明：支持向量机在装甲车辆柴油机技术状况评估中的应用是可行的。     

CAN总线在装甲车辆故障诊断与状态检测系统中的应用

针对目前装甲车辆内部设备种类繁多、故障机理复杂且缺乏较为全面的实时在线故障诊断与状态检测手段这一问题,提出了一种基于CAN总线的网络化在线故障诊断与状态检测系统设计方案,进行了CAN总线通信网的短帧应用层协议开发以及系统实现。该系统具有实时数据采集、在线故障诊断和状态检测等功能,且扩展性强。该系统通过了实车试验,测试结果验证了该方案的可行性和系统工作的可靠性。     

基于扩张观测器的三维有限时间收敛导引律

为了保证视线角速率在弹目碰撞前收敛到零附近的较小邻域内从而达到准平行接近的状态,本文基于自抗扰控制的不确定性估计补偿思想,应用反演控制方法设计了一种考虑导弹自动驾驶仪二阶动态特性和目标机动的三维有限时间收敛导引律。根据有限时间收敛控制理论,严格证明了系统的有限时间收敛特性;为抑制量测噪声,将传统跟踪微分器进行改进并应用于扩张状态观测器与反演控制的设计中。仿真结果表明:在自动驾驶仪响应延迟情况下,所设计的导引律能够导引导弹在有限时间内精确地拦截高速机动目标;改进的跟踪微分器精度高、响应快;基于改进跟踪微分器的扩张观测器估计效果理想。     

Repairable consecutive‐k‐out‐of‐n: F system with Markov dependence

In this article, a model for a repairable consecutive‐k‐out‐of‐n: F system with Markov dependence is studied. A binary vector is used to represent the system state. The failure rate of a component in the system depends on the state of the preceding component. The failure risk of a system state is then introduced. On the basis of the failure risk, a priority repair rule is adopted. Then the transition density matrix can be determined, and the analysis of the system reliability can be conducted accordingly. One example each of a linear and a circular system is then studied in detail to explain the model and methodology developed in this paper. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 18–39, 2000     

不同射流状态下射流气体与高超声速主流相互作用影响

为研究不同射流状态对高超声速飞行器气动加热的影响,对高超声速来流条件下方孔和圆孔横向射流模型进行数值模拟,讨论射流压强、射流速度及射流方向对主流流场的影响,得到了不同射流状态下流场结构、壁面温度热流分布及壁面中心线温度热流变化。结果表明:射流在一定程度上能缓解壁面气动加热情况,壁面引射效果更好,壁面引射速度1 m·s~(-1)时壁面热流降低接近三分之二。在高速(Ma1)射流情况下,适当增大压强和速度,均会使得射流下游的冷却效果加强;在中低速(Ma0.6)射流情况下,射流基本上不改变主流流场而在边界层内流动,流速越大,冷却范围越大,冷却效果也相对较好。射流方向与主流方向夹角为锐角时,利于射流孔下游降温;夹角为钝角时,利于射流孔上游降温。