基础课虚拟实验教学改革与实践

针对基础课实验室规模较小与教学任务繁重的突出矛盾,以建立虚拟实验室为突破口对基础课实验教学改革进行了尝试,并分析了虚拟实验的功能特点。实践证明,在电工与电子技术实验教学中开设虚拟实验,同时发挥传统实验教学的优势,加强了对学生虚拟实验能力和动手操作能力的培养。     

Novel aluminum-based fuel: Facile preparation to improve thermal reactions

To improve the thermal properties of aluminum (Al) in the energetic system, a coated structure with ammonium perchlorate (AP) was prepared by a facile approach. And N, N-Dimethylformamide (DMF) was chosen as an ideal solvent based on heterogeneous nucleation theory and molecular dynamics simulation. This coated structure could enlarge the contact area and improve the reaction environment to enhance the thermal properties. The addition of AP could accelerate oxidation temperature of Al with around 17.5 °C. And the heat release of 85@15 composition rises to 26.13 kJ/g and the reaction degree is 97.6% with higher peak pressure (254.6 kPa) and rise rate (1.397 MPa/s). An ideal ratio with 15 wt% AP was probed primarily. The high energy laser-induced shockwave experiment was utilized to simulate the reaction behavior in hot field. And the larger activated mixture of coated powder could release more energy to promote the growth of shockwave with higher speed up to 518.7 ± 55.9 m/s. In conclusion, 85@15 composition is expected to be applied in energetic system as a novel metal fuel.     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

不同故障模式下的可靠性优化问题

以阀门流体系统为例 ,通过理论分析与数值计算 ,讨论了组成单元具有多个故障模式情形的系统可靠性优化问题 ,对传统的冗余技术作了进一步的发展 ,确立了考虑不同故障模式时可靠性优化的一般模型 ,最后得到了必须根据不同故障模式比率确定配置方式的结论     

钢框架梁柱焊接连接抗震性能试验研究

以梁端腹板的扇形孔形状为主要参数,进行了4个足尺钢框架梁柱焊接节点往复加载下的破坏试验。通过对弯矩—塑性转角和弯矩—累积塑性变形倍率试验曲线对比分析表明,扇形孔是节点变形能力和破坏形式的主要影响因素。改进扇形孔构造是一种有效措施,既可提高节点的抗震性能,又能保持制作工艺与传统节点基本相同。     

Some probability functions in reliability and their applications

There has been much research on the general failure model recently. In the general failure model, when the unit fails at its age t, Type I failure (minor failure) occurs with probability 1 ? p(t) and Type II failure (catastrophic failure) occurs with probability p(t). In the previous research, some specific shapes (constant, non‐decreasing, or bathtub‐shape) on the probability function p(t) are assumed. In this article, general results on some probability functions are obtained and applied to study the shapes of p(t). The results are also applied to determining the optimal inspection and allocation policies in maintenance problems. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

通用装备机械液压系统综合检测试验平台的设计与研制

针对目前通用装备保障建设过程中存在的保障设备通用性差、综合功能弱、机动性能差及信息化程度低等问题,提出了"划类分组、综合集成、一体通用"的设计思想,研制了可完成军械、装甲、工程、防化、车辆、陆军船艇等装备机械液压系统技术状况检测与评估、故障诊断、部(元)件修后试验与质量评估、信息管理等功能的综合机动平台。重点阐述了平台各系统的设计思想、硬件组成及软件框架。实际应用表明,该平台具有"广谱"、"广域"和"全时"的能力,其推广使用将为通用装备保障由"基于型号"向"基于能力"的建设转型提供成功示范。     

开设数学实验课之我见

数学实验课是近几年刚刚兴起的一门新课。该课程对提高学生的学习兴趣、巩固数学知识、提高计算机应用水平以及培养学生的创新能力都将起到促进作用。有条件的工科本科专业应当尝试开设这门课程。     

物理化学实验教学改革的探索与实践

针对传统实验教学中存在的主要问题,对物理化学实验教学改革进行了一些有益的实践和探索,培养了学生的创新能力和综合素质,提高了教学质量。     

开设本科生综合性生物化学实验的探讨

本文探讨了综合性生物化学实验的特点、在本科生中开设综合性生物化学实验的必要性、具体做法和今后应注意的问题