不同导引模式下的末修弹脉冲参数优化研究

在总脉冲量确定的情形下,在启控时间、总脉冲数、最小点火时间间隔及点火阈值等脉冲参数对末修弹落点散布的影响进行详细分析的基础上,利用数值仿真的方法,对比例导引模式、抛物线导引模式、落点预测导引模式、弹道追踪导引模式和zx导引模式等常用导引模式下的脉冲参数优化进行深入分析研究．     

内腐蚀缺陷尺寸对DN150承插管线承压能力的影响

为了科学地指导DN150承插管线的使用与管理,采用非线性有限元法对带内腐蚀缺陷的DN150承插管线进行了剩余强度的评估。通过分析和计算,研究了腐蚀缺陷宽度、长度和深度对管线极限承载能力的影响。结果表明：腐蚀缺陷宽度对DN150承插管线的承载能力影响很小,可忽略不计;随着腐蚀缺陷长度的增加,管线的承载能力略微减小,当缺陷长度达到150mm,管道失效压力基本不变;随着腐蚀缺陷深度的增加,管道失效压力呈线性递减,其对管道失效压力的影响程度远远大于腐蚀缺陷长度。     

基于协同交战的战术数据链技术研究

介绍了外军典型战术数据链的发展情况,同时根据未来网络化作战需求,对基于协同交战的战术数据链的作战使用进行了研究,提出了基于协同交战的战术数据链体系结构、功能需求和指标需求,最后给出了基于协同交战的战术数据链的发展建议.     

Dual-steering mode based on direct yaw moment control for multi-wheel hub motor driven vehicles:Theoretical design and experimental assessment

One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process.This paper proposes a dual-steering mode based on direct yaw moment control for enhancing vehicle steering ability in complex environ-ments.The control system is designed as a hierarchical structure,with a yaw moment decision layer and a driving force distribution layer.In the higher-level layer,the objective optimization function is con-structed to obtain the slip steering ratio,which represents the degree of vehicle slip steering in the dual-steering mode.A yaw moment controller using active disturbance rejection control theory is designed for continuous yaw rate control.When the actual yaw rate of the vehicle deviates from the reference yaw rate obtained by the vehicle reference model and the slip steering ratio,the yaw moment controller is actuated to determine the yaw moment demand for vehicle steering.In the lower-level layer,there is a torque distribution controller based on distribution rules,which meets the requirement of yaw moment demand without affecting the total longitudinal driving force of the vehicle.For verifying the validity and feasibility of the dual-steering mode,simulations were conducted on the hardware-in-loop real-time simulation platform.Additionally,corresponding real vehicle tests were carried out on an eight-wheel prototype vehicle.Test results were generally consistent with the simulation results,thereby demon-strating that the proposed dual-steering mode reduces steering radius and enhances the steering per-formance of the vehicle.     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

Adaptive sliding mode control of modular self-reconfigurable spacecraft with time-delay estimation

The reconstruction control of modular self-reconfigurable spacecraft (MSRS) is addressed using an adaptive sliding mode control (ASMC) scheme based on time-delay estimation (TDE) technology. In contrast to the ground, the base of the MSRS is floating when assembled in orbit, resulting in a strong dynamic coupling effect. A TED-based ASMC technique with exponential reaching law is designed to achieve high-precision coordinated control between the spacecraft base and the robotic arm. TDE technology is used by the controller to compensate for coupling terms and uncertainties, while ASMC can augment and improve TDE’s robustness. To suppress TDE errors and eliminate chattering, a new adaptive law is created to modify gain parameters online, ensuring quick dynamic response and high tracking accuracy. The Lyapunov approach shows that the tracking errors are uniformly ultimately bounded (UUB). Finally, the on-orbit assembly process of MSRS is simulated to validate the efficacy of the proposed control scheme. The simulation results show that the proposed control method can accurately complete the target module’s on-orbit assembly, with minimal perturbations to the spacecraft’s attitude. Meanwhile, it has a high level of robustness and can effectively eliminate chattering.     

钢框架梁柱焊接连接抗震性能试验研究

以梁端腹板的扇形孔形状为主要参数,进行了4个足尺钢框架梁柱焊接节点往复加载下的破坏试验。通过对弯矩—塑性转角和弯矩—累积塑性变形倍率试验曲线对比分析表明,扇形孔是节点变形能力和破坏形式的主要影响因素。改进扇形孔构造是一种有效措施,既可提高节点的抗震性能,又能保持制作工艺与传统节点基本相同。     

火灾情况下地铁通风系统运行模式分析

分析了地铁在火灾情况下区间隧道和站台各种通风系统运行模式,以及通风系统有效运行所需达到的物理参数。对通风模式进行了分析,确定了火灾情况下最佳的通风方式。分析现行规范规定的数据,用临界风速公式进行计算得出区间隧道风速不满足通风要求。     

Some probability functions in reliability and their applications

There has been much research on the general failure model recently. In the general failure model, when the unit fails at its age t, Type I failure (minor failure) occurs with probability 1 ? p(t) and Type II failure (catastrophic failure) occurs with probability p(t). In the previous research, some specific shapes (constant, non‐decreasing, or bathtub‐shape) on the probability function p(t) are assumed. In this article, general results on some probability functions are obtained and applied to study the shapes of p(t). The results are also applied to determining the optimal inspection and allocation policies in maintenance problems. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

韩礼德的语域理论与大学英语教学

韩礼德的语域理论是系统功能语法的重要理论之一,它强调语言的交际功能和社会意义。文章探讨了如何将语域知识运用于大学英语教学实践,这种尝试不仅能使学生的阅读理解能力得到提高,而且有利于听、说、写、译等综合能力的提高,从而找到一种较好的教学方法,加速学生从语言知识向语言应用能力转化的过程。