基于ANSYS的油罐拱顶稳定性分析

针对加肋拱顶稳定性十分复杂的问题,基于ANSYS建立了加肋拱顶油罐的三维有限元模型,对加肋拱顶的结构稳定性进行了数值模拟。对加肋拱顶在外压作用下的线性与非线性临界屈曲载荷进行了对比分析,利用弧长法获得了拱顶在加肋情况下径向、环向、轴向的载荷-位移曲线。结果表明:数值模拟的加肋拱顶屈曲方向和屈曲区域与实际失稳结果相一致,可以为加肋拱顶设计和稳定性分析提供一定参考。     

基于FLAC^3D的岩土边坡施工效应研究

采用FLAC3D对预应力锚索框架梁支护的岩土边坡施工过程进行数值模拟,围绕施工中坡体位移场与应力场的变化以及下级边坡施工对上部已完成的支挡结构受力影响进行研究.结果表明坡体开挖引起的松弛区呈圆弧状,且位移由临空面向坡体内逐渐减小,坡体弹性模量与其变形呈非线性递减关系;预应力锚索框架梁能有效抑制坡体变形,从坡顶到坡脚锚索轴力依次增大,故工程设计中宜对其分别设计,做到“强腰固脚”;下级边坡与上级边坡的支挡结构相互约束,共同承担滑坡推力,形成一种“联合支挡结构”.     

基于备件需求预测的两步法理论

在对备件需求时间序列研究的基础上,结合指数平滑法和Croston法的特点,分析了指数平滑法与两步法的原理,通过对指数平滑法和两步法方差的研究,得到两步法是指数平滑法的一般形式的结论,为两步法的进一步研究提供一定的理论支撑。     

基于排队论的协同防空作战效能分析

舰艇编队协同防空作战是未来海战的重要形式,运用排队论对舰艇编队协同防空的作战效能进行了研究。以排队理论为基础建立了舰艇编队协同防空的排队模型,运用理论分析得到了以整个编队毁伤目标概率为指标的防空效能。通过对防空效能的计算与仿真,分析了几个重要参数对防空效能的影响,为多层舰艇防空系统的设计与运用提供了理论支持。     

无人水下反潜作战平台指挥控制研究

无人反潜平台的指挥控制问题是关系其作战能力的核心问题之一,它一般包含平台行为控制、自主行为决策控制和支援平台干预控制三个部分。本文探讨了无人反潜平台指挥控制的工作原理,对影响无人反潜平台未来发展方向的指挥控制方面的几个关键问题进行了分析,并指出了今后研究的重点。     

中段反导指挥控制能力生成机理及构成分析

提出了中段反导指挥控制能力生成的要素基础建设机理、要素集成聚优机理和要素联动涌效机理,构建了中段反导指挥控制能力总体构成框架,并对作战能力具体构成进行了分析,可为反导指挥控制系统建设及作战效能评估提供借鉴。     

Deconsolidation and combustion performance of thermally consolidated propellants deterred by multi-layers coating

Both heating and solvent-spray methods are used to consolidate the standard grains of double-base oblate sphere propellants plasticized with triethyleneglycol dinitrate (TEGDN) (TEGDN propellants) to high density propellants. The obtained consolidated propellants are deterred and coated with the slow burning multi-layer coating. The maximum compaction density of deterred and coated consolidated propellants can reach up to 1.39 g/cm³. Their mechanic, deconsolidation and combustion performances are tested by the materials test machine, interrupted burning set-up and closed vessel, respectively. The static compression strength of consolidated propellants deterred by multi-layer coating increases significantly to 18 MPa, indicating that they can be applied in most circumstances of charge service. And the samples are easy to deconsolidate in the interrupted burning test. Furthermore, the closed bomb burning curves of the samples indicate a two-stage combustion phenomenon under the condition of certain thickness of coated multi-layers. After the outer deterred multi-layer coating of consolidated samples is finished burning, the inner consolidated propellants continue to burn and breakup into aggregates and grains. The high burning progressivity can be carefully obtained by the smart control of deconsolidation process and duration of consolidated propellants. The preliminary results of consolidated propellants show that a rapid deconsolidation process at higher deconsolidation pressure is presented in the dynamic vivacity curves of closed bomb test. Higher density and higher macro progressivity of consolidated propellants can be obtained by the techniques in this paper.     

Long-rod penetration: the transition zone between rigid and hydrodynamic penetration modes

Long-rod penetration in a wide range of velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second. The long rods maintain rigid state when the impact velocity is low, the nose of rod deforms and even is blunted when the velocity gets higher, and the nose erodes and fails to lead to the consumption of long projectile when the velocity is very high due to instantaneous high pressure. That is, from low velocity to high velocity, the projectile undergoes rigid rods, deforming non-erosive rods, and erosive rods. Because of the complicated changes of the projectile, no well-established theoretical model and numerical simulation have been used to study the transition zone. Based on the analysis of penetration behavior in the transition zone, a phenomenological model to describe target resistance and a formula to calculate penetration depth in transition zone are proposed, and a method to obtain the boundary velocity of transition zone is determined. A combined theoretical analysis model for three response regions is built by analyzing the characteristics in these regions. The penetration depth predicted by this combined model is in good agreement with experimental result.     

On the continued acceleration of bomb casing fragments following casing fracture

It has been said that, once a bomb casing has fractured, “detonation gases will then stream around the fragments or bypass them, and the acceleration process stops there.” However, while apparently copious gas flow through casing fractures indicates some pressure release, it is also an indication of significant gas drive pressure, post casing fracture. This paper shows two approaches to the problem of calculating the actual loss of drive. One presents first-order analytical calculations, in cylindrical geometry, of pressure loss to the inside surface of a fractured casing. The second shows the modelling of a selected example in the CTH code. Both approaches reveal that gas escape, while occurring at its own sound-speed relative to the adjacent casing fragments, has to compete with rapid radial expansion of the casing. Together with some historic experiments now publicly available, our calculations indicate that post-fracture casing fragment acceleration is, for most systems, unlikely to be reduced significantly.     

基于敏感性分析的DF化学动力学模型的简化

基于两种燃料体系下的DF详细化学反应动力学模型,利用敏感性分析的方法,分别提出了相应的简化反应机理.简化过程中发现,仅考虑DF“冷反应”泵浦过程,忽略掉高振动激发态,忽略掉D2和DF分子的离解复合反应对整个系统影响不大.DF分子之间以及DF与D、D2、HF之间的能量转移反应具有较高的敏感性.简化机理在有效概括DF化学反...