MIMO雷达和组网雷达的CA2CFAR检测性能比较

多输入多输出(MIMO)雷达是近几年出现的一种新雷达技术,也是近几年雷达领域研究的重点。建立MIMO雷达的信号模型,明确给出MIMO雷达进行CA2CFAR检测的检测概率和虚警概率解析表达式,对组网雷达和MIMO雷达在均匀杂波背景下CA2CFAR检测性能进行了分析对比。仿真结果表明。MIMO雷达对类似噪声特性的复杂目标具有更好的检测性能。     

基于加速寿命试验的晶体管静电放电潜在性失效的研究

对高频小功率硅双极结型晶体管2SC3356进行静电放电试验,并利用加速寿命试验原理对两组器件进行加速寿命试验。采用Arrhenius模型对试验结果进行计算分析,发现低于损伤阈值的ESD注入可以使器件的寿命缩短,得出ESD可以在高频小功率硅双极结型晶体管内部造成潜在性失效,使得器件寿命缩短。     

关联网络中的级联失效模型与分析

网络之间的关联依赖关系能使某一网络内的级联失效扩散至其他网络,其本质是位于不同网络的关联节点之间基于功能依赖的相关失效.以两个关联的网络为对象,建立关联网络模型,提出了一种关联网络的级联失效模型.模型将关联网络中的级联失效分解为网络内级联失效和网络间级联失效,并采用了基于度的级联规模评价方法.利用模型研究了两个关联无标...     

Numerical modelling of non-ideal detonation in ANFO explosives applying Wood-Kirkwood theory coupled with EXPLO5 thermochemical code

Ammonium nitrate and fuel oil (ANFO) based explosive is a classic example of non-ideal high explosives. Its detonation is characterized by a strong dependence of detonation parameters on explosive charge diameter, presence and characteristics of confinement, as well as incomplete consumption of explosive at the sonic point.In this work we propose a detonation model based on the Wood-Kirkwood (WK) theory coupled with the thermochemical code EXPLO5 and supplemented with reaction rate models. Our objective is to analyze the validity of the model for highly non-ideal ANFO explosives, with emphasis on effect of reaction rate models.It was found that both single-step and two-step pressure-based models can be calibrated to reproduce experimental detonation velocity-charge radius data of ANFO at radii significantly above the failure radius (i.e. for D/D_id > ∼0.6). Single-step pressure-based model, with the pressure exponent equal to 1.4, proved to be the most accurate, even in the vicinity of the failure radius. The impact of the rate models is most evident on temporal (and spatial) distribution of flow parameters in detonation driving zone, especially when it comes to the conversion and width of detonation driving zone.     

Increasing of photostability of HNS explosive in the presence of UV photostabilizers

The photostabilies of hexanitrostillbene(HNS)were studied at 1％wt.of photostabilizers.The photo-stabilizers of Chiguard BP-12(UV-531),ADK STAB LA-326(UV-326),ADK STAB LA-32(UV-P),Irganox 1010 and Everstab LS944 were used in this study.A photoreactor including a 30 W monochromatic UV lamp was used for investigation of photodegradations of solid HNS.The changes in surface area of HNS peak in HPLC chromatogram at time intervals of 2,4,6 and 8 h were used for calculation of kinetic rate constants of photodegradation process.The compound of UV-P photostabilizer was found to have the greatest effect on enhancing photostability for HNS among the investigated photostabilizers.The kinetic rate constants were obtained 6.2 × 10-2 and 4.1 × 10-2 h-1,respectively,for photodegradation process of HNS in absence and in presence of UV-P.     

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Polyurea is an elastomeric material that can be applied to enhance the protection ability of structures under blast and impact loading.In order to study the compressive mechanical properties of SiC/polyurea nanocomposites under quasi-static and dynamic loading,a universal testing machine and split Hop-kinson pressure bar(SHPB)apparatus were used respectively.The stress-strain curves were obtained on polyurea and its composites at strain rates of 0.001-8000 s-1.The results of the experiment suggested that increase in the strain rates led to the rise of the flow stress,compressive strength,strain rate sensitivity and strain energy.This indicates that all of the presented materials were dependent on strain rate.Moreover,these mechanical characters were enhanced by incorporating a small amount of SiC into polyurea matrix.The relation between yield stress and strain rates were established using the power law functions.Finally,in order to investigate the fracture surfaces and inside information of failed specimens,scanning electron microscopy(SEM)and micro X-ray computed tomography(micro-CT)were used respectively.Multiple voids,crazes,micro-cracks and cracking were observed in fracture surfaces.On the other hand,the cracking propagation was found in the micro-CT slice images.It is essential to understand the deformation and failure mechanisms in all the polyurea materials.     

线性方程组二级迭代法的收敛速度

二级迭代法由内、外迭代和内迭代次数三部分组成。给出了线性方程组二级迭代法R1-收敛因子的一个上界,这个上界由内、外迭代的R1-收敛因子和内迭代次数所决定,其主部为外迭代的R1-收敛因子。在矩阵单调性条件下,对于任何内迭代方法和任意内迭代次数,证明了外迭代的R1-收敛因子也是二级迭代法R1-收敛因子的下界。所得结果反映了内、外迭代的收敛速度以及内迭代次数对于二级迭代法收敛速度的综合影响。     

Single machine scheduling with a restricted rate‐modifying activity

In this paper we consider the problem of scheduling a set of jobs on a single machine on which a rate‐modifying activity may be performed. The rate‐modifying activity is an activity that changes the production rate of the machine. So the processing time of a job is a variable, which depends on whether it is scheduled before or after the rate‐modifying activity. We assume that the rate‐modifying activity can take place only at certain predetermined time points, which is a constrained case of a similar problem discussed in the literature. The decisions under consideration are whether and when to schedule the rate‐modifying activity, and how to sequence the jobs in order to minimize some objectives. We study the problems of minimizing makespan and total completion time. We first analyze the computational complexity of both problems for most of the possible versions. The analysis shows that the problems are NP‐hard even for some special cases. Furthermore, for the NP‐hard cases of the makespan problem, we present a pseudo‐polynomial time optimal algorithm and a fully polynomial time approximation scheme. For the total completion time problem, we provide a pseudo‐polynomial time optimal algorithm for the case with agreeable modifying rates. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

ESD对微电子器件造成潜在性失效的研究综述

静电放电(ESD)潜在性失效问题是当前微电子工业面临的可靠性问题之一,并且越来越引起人们的重视。国内外学者在微电子器件ESD潜在性失效的检测及探讨失效机理方面的研究取得了较大的进展。研究表明:MOS电路等微电子器件,在ESD作用下确实存在潜在性失效问题。因此,开展ESD潜在性失效研究具有重要意义。