角速率火控系统计算延迟问题的研究

提出解决角速率火控系统计算延迟问题的两种方法,为深入研究角速率火控计算进行了新的探索。     

引信静态试验模拟动态试验研究

研究了用静态试验评价无线电引信质量性能的方法。分析了静态试验项目、样本量的确定,建立了各组件失效与引信失效的对应关系,提出了通过组件的失效信息计算引信失效率的方法。     

舰用锅炉过热器使用寿命的论证

鉴于某型舰用锅炉过热器破损的主因在于其内部腐蚀,而破损的主要方式是由管头的溃烂开始直至整个管头烂掉为止,导致管子的胀接松动而漏泄。因此,过热器的使用年限全取决于管头的腐蚀速度。通过确定过热器内管头的腐蚀率、锅炉年内运行时间以及保养时间等要素来估算过热器的使用寿命。     

When are observed failures more informative than observed survivals?

A framework involving independent competing risks permits observing failures due to a specific cause and failures due to a competing cause, which constitute survival times from the cause of primary interest. Is observing more failures more informative than observing survivals? Intuitively, due to the definitiveness of failures, the answer seems to be the former. However, it has been shown before that this intuition holds when estimating the mean but not the failure rate of the exponential model with a gamma prior distribution for the failure rate. In this article, we address this question at a more general level. We show that for a certain class of distributions failures can be more informative than survivals for prediction of life length and vice versa for some others. We also show that for a large class of lifetime models, failure is less informative than survival for estimating the proportional hazards parameter with gamma, Jeffreys, and uniform priors. We further show that, for this class of lifetime models, on average, failure is more informative than survival for parameter estimation and for prediction. These results imply that the inferential purpose and properties of the lifetime distribution are germane for conducting life tests. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

装药长径比对EFP成型作用效果影响分析

针对装药长径比对EFP成型的影响,基于一种球缺型药型罩EFP,利用ANSYS／LS-DYNA仿真软件对其成型过程进行建模仿真,研究EFP成型过程及其各项参数．在该基础上,改变装药高度得到不同的装药长径比数据,并对不同长径比EFP形成过程进行仿真,得到不同装药长径比EFP的速度、速度增长率及炸药能量利用率等数据,为选择最佳装药长径比提供依据．     

基于删除平均的VI-CFAR检测器

针对MLVI-CFAR检测器在多个随机分布干扰目标背景下检测性能不好,以及OSVI-CFAR检测器在均匀环境和仅单滑窗存在干扰目标的环境下检测性能欠佳问题,提出了一种基于删除平均(CML)的VI-CFAR检测器(CMLVI-CFAR).仿真验证了CMLVI-CFAR检测器在均匀背景及多目标干扰环境下,都具有比MLVI和OSVI-CFAR检测器好的检测性能,并且其在杂波边缘背景下的虚警控制能力与前两者也基本一致,说明其在实际杂波环境中具有更强的鲁棒性和良好的应用潜力.     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

欠驱动关节机械臂位置控制研究

以具有欠驱动关节的水平两自由度机械臂为研究对象,研究当驱动关节达到指定位置后,以幅值和频率可调的驱动关节角速度信号为控制输入量来控制欠驱动关节的位置。用平均法对欠驱动机械臂的拉格朗日动力学模型进行了简化,并基于简化后的模型给出了闭环非线性反馈控制律。仿真结果表明,所设计的闭环非线性反馈控制率能够使任意初始位置的欠驱动关节趋近其指定位置。     

倡真反伪 弃虚返实——《儒林外史》主题新探

关于《儒林外史》的主题,至今众说纷纭。解决这个问题的核心是从这部讽刺小说中找出作者的价值判断。书中所讽刺的各种人物,归于一点,在于学问或人格的“伪妄”。而小说的价值判断标准,即为“真儒”的人格学问之“真”和他们“礼乐兵农”的济世方案之“实”。所以,人才观念上的倡真反伪和社会主张上的弃虚返实,即为小说的基本主题。     

Discrete search allocation game with false contacts

This paper deals with a two‐person zero‐sum game called a search allocation game, where a searcher and a target participate, taking account of false contacts. The searcher distributes his search effort in a search space in order to detect the target. On the other hand, the target moves to avoid the searcher. As a payoff of the game, we take the cumulative amount of search effort weighted by the target distribution, which can be derived as an approximation of the detection probability of the target. The searcher's strategy is a plan of distributing search effort and the target's is a movement represented by a path or transition probability across the search space. In the search, there are false contacts caused by environmental noises, signal processing noises, or real objects resembling true targets. If they happen, the searcher must take some time for their investigation, which interrupts the search for a while. There have been few researches dealing with search games with false contacts. In this paper, we formulate the game into a mathematical programming problem to obtain its equilibrium point. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007