红外警戒系统点目标检测距离理论分析

给出了红外警戒系统点目标探测距离的计算模型与公式,分析了影响点目标探测距离的参数间关系,并得出有关目标提取算法及传感器参数选择的几点重要结论.     

雷达量测仿真中跟踪算法的一种实现形式

结合在某些仿真应用中的实际情况,对目标真实位置已知时雷达的卡尔曼滤波算法的仿真实现进行了讨论。以相控阵雷达为例,给出了雷达噪声模型,介绍了雷达量测值的仿真过程,并推导了转换坐标卡尔曼滤波的实现方法。通过数值仿真试验,比较了此种算法的优点,并进行了分析。     

点状保卫目标的空袭规模预测模型

现代空袭作战已成为结构破坏战,各类政治、经济、军事指挥中心、侦察预警设施,交通枢纽等点状目标已成为敌空袭的首选目标,而如何准确、可靠地预测点状保卫目标的空袭规模是防空作战的首要问题和难点。把点状保卫目标分为立体类目标、平面类目标、地下类目标,根据每类点状目标的特性,构建其相应的空袭规模预测模型,通过算例分析,该模型具有较高的可信度,能为各种辅助决策系统和指挥自动化系统提供决策支持。     

基于经典控制理论的制导系统校正方法研究

针对空空导弹抗目标大机动时,制导系统持续增加的快速性需求,利用反馈/前馈控制信号可提高瞬态和频率响应的经典控制思想,以及在制导算法中引入导弹的实际加速度补偿量以改善制导回路性能的方法,设计了制导系统校正算法.然后,通过线性化模型对制导系统校正算法的性能进行了数字仿真,仿真结果表明系统校正算法能够降低目标机动时所产生的脱...     

Effect of projectile parameters on opening behavior of PELE penetrating RC target

When a penetrator with enhanced lateral effect (PELE) impacts on a reinforced concrete (RC) target, the target is damaged with a large opening. An understanding of how PELE projectile parameters affect the opening dimension, is essential for effective design of the PELE projectile. In this study, under the condition that the impact velocity and target parameters (strength and thickness) were fixed values, the important influence factors of the PELE (jacket wall thickness B, jacket material strength Y1, filling material strength Y2 and angle of monolithic jacketθ) were determined by a dimensional analysis. Tests and simulations of the PELE penetrating the RC target were conducted to analyze the influence of these factors on opening diameter ((D), an equivalent diameter under relative kinetic energy). Based on the test and simulation results, it is found that the influence of these factors B, Y1 andθon the deformation mode of the jacket shows a similar trend:as values of the three factors decrease, the jacket deforms from small bending deformation to large one, and then to curling deformation. This causes the opening diameter to first increase with the decrease of these three factors, and then decreases. It is well known that the bending resistance of the jacket is related to these factors B, Y1 andθ. Therefore, a plastic limit bending moment (M0) of the jacket was quoted to characterize the influence of these factors on the bending deformation of the jacket and the opening diameter of the target. The influence factor Y2 causes (D) to first increase with the increase of Y2, and then decreases. A formula was developed to predict the opening diameter, whose influence parameters were considered in a dimensionless way. It has been shown that the dimensionless opening diameter (D)/d1 is dependent on two dimensionless parameters Q = (d31fc/M0) and G = (fc/Y2), where d1 and fc are the outer diameter of the projectile and the compressive strength of the target, respectively.     

亮点法在引信仿真中对目标回波计算的应用

在引信的数字仿真和半实物仿真中,目标回波的计算是进行仿真的基础。介绍了亮点法在目标回波计算中的应用,给出了利用亮点法对目标回波的幅度、延时和多普勒频率进行仿真计算的方法。该方法能够简化计算过程,能够满足仿真中实时性的要求。     

实施大区域防空应重视末端防御

结合大区域防空作战的理论研究,分析未来防空中末端防御在大区域防空体系中的地位和作用。提出末端防御是大区域防空的重要组成部分,是防空体系中实施大区域防空的最后一道防线,是实现歼灭敌空袭兵器与掩护重要目标安全的重要手段。通过分析现代空袭特点,提出实施末端防御对我防空武器装备发展的要求。     

Incomplete contracting and target‐cost pricing

Procurement of advanced technology defence equipment requires appropriate contractual arrangements to achieve efficient R&D investments. This paper analyses the optimality of target‐cost and fixed price contracts and shows that target‐cost pricing can achieve a first best where both fixed‐price contracts and cost reimbursement fail to do so. The main message of this paper is that in incomplete contracting optimality may sometimes be achieved by arrangements which combine several formulae which, individually, would fail to achieve efficiency.     

某型导弹目标跟踪技术的应用研究

在某型导弹制导过程中,制导系统对导弹弹标信号的自动识别与跟踪是影响射击精度的关键．论述了视频图像中运动目标识别与跟踪技术的概念以及主要方法分类,在详细分析某型号导弹目标跟踪技术的基础上提出了改进该型号导弹目标识别性能的几个要点．     

近程舰炮武器系统拦截高速目标发展研究

反舰导弹的超声速特性使得现役近程舰炮武器系统的反应时间严重不足,毁伤能力明显下降.针对高速目标,分析了目标对系统的随动性能需求,研究了系统情报处理、传感器捕获跟踪及火控解算等时间特征参数、及系统毁伤能力,并提出了解决问题的初步想法.分析结果表明,可以提高近程舰炮武器系统对超高声速目标的跟踪毁伤能力,实现对该类目标的有效拦截.