基于动态模型的机场配电网潮流计算新方法

机场配电网因非常情况成为孤立电力系统后,配电系统的电压、潮流和频率等发生巨大变化,传统的潮流计算方法往往会出现收敛性差、计算结果与实际不相符的情况。提出的机场配电网动态潮流计算模型能有效解决此类问题,阐述了机场配电网动态潮流计算模型的构成原理、算法并给出相应算例。通过算例计算证明了动态潮流计算模型适用于计算机场配电网的潮流。     

Approximation algorithms for general one‐warehouse multi‐retailer systems

Logistical planning problems are complicated in practice because planners have to deal with the challenges of demand planning and supply replenishment, while taking into account the issues of (i) inventory perishability and storage charges, (ii) management of backlog and/or lost sales, and (iii) cost saving opportunities due to economies of scale in order replenishment and transportation. It is therefore not surprising that many logistical planning problems are computationally difficult, and finding a good solution to these problems necessitates the development of many ad hoc algorithmic procedures to address various features of the planning problems. In this article, we identify simple conditions and structural properties associated with these logistical planning problems in which the warehouse is managed as a cross‐docking facility. Despite the nonlinear cost structures in the problems, we show that a solution that is within ε‐optimality can be obtained by solving a related piece‐wise linear concave cost multi‐commodity network flow problem. An immediate consequence of this result is that certain classes of logistical planning problems can be approximated by a factor of (1 + ε) in polynomial time. This significantly improves upon the results found in literature for these classes of problems. We also show that the piece‐wise linear concave cost network flow problem can be approximated to within a logarithmic factor via a large scale linear programming relaxation. We use polymatroidal constraints to capture the piece‐wise concavity feature of the cost functions. This gives rise to a unified and generic LP‐based approach for a large class of complicated logistical planning problems. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

消防供水的计算和分析

介绍国际上消防供水的计算方法,并对消防供水方式进行分析.针对国内外的差异,提出消防供水的新思路.     

Authorware多媒体制作技术研究

对Authorware管理多媒体素材的三种方式进行了详细的分析,研究了基于流程控制的面向对象的可视化编程特点,分别对系统登录模块、连接数据库和发布打包三个关键性应用技术进行了具体的开发。     

环状两相流空泡份额新析

对圆管内环状两相流的空泡份额进行了分析.首先推导出气相摩擦乘子的一般表达式,然后求得空泡份额与滑速比的解析式,并进行了分析讨论.与有关文献结果的比较表明:在一定的压力范围内文中所得的解是正确、可信的.     

长背鳍扭波推进活鱼实验研究

对依靠长背鳍扭波推进的尼罗河魔鬼鱼(GNF)进行循环水槽实验研究,录制各种游动模式的DV图像,分析研究GNF的游动参数,得到了扭波频率、波长与游速的定量关系,以及斯特罗哈数与雷诺数的关系曲线。当特征游速U≤1.3时,游速与扭波频率成正比,特征波长λ≈0.31,斯特罗哈数St≈0.41;当特征游速U1.3时,扭波频率ν不再增大(约5.5～6 Hz),GNF采用变波长模式游动,平均特征波长λ最大增加到0.38,斯特罗哈数St则减小,最小为0.31,与BCF模式St值相同。     

动态旋流器湍流流场的模拟研究

采用雷诺应力模型对动态旋流器湍流流场进行模拟.模拟结果与文献实验数据基本吻合,证明该模型的正确性.其中,轴向和切向速度的模拟结果和实际结果非常接近;径向速度的模拟将有助于旋流器结构及性能的分析.所建立的模型和所使用的计算方法为深入探讨动态水力旋流器的流场特性、分离机理及结构优化设计提供了一条有效的途径.     

防止反编译技术研究

运用反编译技术可以对软件可执行二进制代码进行非法的修改或窃取其知识产权。为了防范这种情况,提出了在程序的汇编级转化直接跳转为间接跳转和插入伪造的跳转表以隐藏程序控制流的2种方法,来提高程序防止反编译的性能,增加软件分析的难度。     

Lipschitz非线性系统状态观测器设计新方法

针对Lipschitz非线性系统状态观测器,提出了一种以极小化条件数为目标准则的新的设计方法。运用梯度下降法和Slyvester方程,计算极小化条件数,优化增益矩阵和最大允许Lipschitz常数,完成观测器设计。通过同其它文献的算例比较,结果发现按文中方法设计的观测器具有迭代次数少、优化结果好的特点。     

气动光学效应校正中湍流流场控制方法

控制湍流流场是气动光学效应校正中的重要途径。叙述了湍流流场控制的 3种方法:壁面冷却、吸气和壁面形状的优化。在实际工程应用中,同时考虑这些方法,可以减小气动光学效应的影响。