15cm×15cm 磁悬挂天平系统(MSBS)的电磁场分析与计算

本文采用二维电磁场有限元法及磁路的简化计算法对15cm×15cm磁悬挂天平系统（MSBS）的阻力线圈间距、磁场的分布情况进行了分析计算,并与测试结果进行了分析比较,给出了15cm×15cm磁悬挂天平系统（MSBS）的结构方案。     

Waypoint analysis for command and control

Command and Control (C2) in a military setting can be epitomized in battles‐of‐old when commanders would seek high ground to gain superior spatial‐temporal information; from this vantage point, decisions were made and relayed to units in the field. Although the fundamentals remain, technology has changed the practice of C2; for example, enemy units may be observed remotely, with instruments of varying positional accuracy. A basic problem in C2 is the ability to track an enemy object in the battlespace and to forecast its future position; the (extended) Kalman filter provides a straightforward solution. The problem changes fundamentally if one assumes that the moving object is headed for an (unknown) location, or waypoint. This article is concerned with the new problem of estimation of such a waypoint, for which we use Bayesian statistical prediction. The computational burden is greater than an ad hoc regression‐based estimate, which we also develop, but the Bayesian approach has a big advantage in that it yields both a predictor and a measure of its variability. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

固定天区小视场星跟踪器两颗星识别方法

研究了在观测天区固定的前提下,小视场星跟踪器视场内只有两颗观测星时的星图模式识别算法。首先简述了研究的必要性;接着简要介绍了实时星图的预处理;随后详细论述了所提出算法的具体步骤;然后说明了导航星表的制定过程。仿真结果表明了算法是有效的,并对仿真试验结果进行了分析;最后给出了结论。     

多重网格法求解静电像管三维电场的若干问题研究

详细讨论了多重网法数值求解三维静电场的若干数学问题,诸如三维多重网格法的限制与延拓公式推导、确定静电像管三维电子光学系统中的锥面电极、圆筒电极、球面电极、圆孔膜片电极、孔电极等的空间位置及范围的方法、以及迭代计算的逻辑尺编码方法等,为像管电子光学系统设计及优化设计奠定了良好基础.     

复杂声场环境下的近场声全息技术

近场声全息对测量环境的严格要求限制了它在工程实际中的应用,特别是利用互谱法求解全惠面声压时,参考信号的获取极为关键.针对有多个噪声源同时存在的复杂声场环境,提出一种工程解决方法,利用振动信号和声源出口处的信号作为近场声全息的参考信号,在传递函数法的基础上推导出全息面上分离的复声压,由此达到复杂声场环境下的近场声全息重建...     

基于云重心方法的海战场环境评估

针对当前海战场环境评估方法存在的问题与不足,引入云理论对其进行科学评估。首先,对云模型和云重心的评判步骤进行阐述。然后,建立海战场环境的云模型和评价指标体系,算出加权偏离度θ。最后,将结果输入云发生器得出评价结果。实验结果表明,该方法简单易行,可操作性强,为海战场环境评估提供了一种较好的途径。     

Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive (FAE) cloud explosions may cause significant casualties. The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves. In this paper, a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction. The model is verified with the experimental data of a fourfold-source FAE explosion, with the total fuel mass of 340 kg. Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source. In the case of multi-sources, the overpressure fields are influenced significantly by source scattering distance and source number. Subsequently, damage ranges of overpressure under three different levels are calculated. Within a suitable source scattering distance, the damage range of multi-sources situation is greater than that of the single-source, under the same amount of total fuel mass. This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.     

Effect of friction stir processing on mechanical properties and heat transfer of TIG welded joint of AA6061 and AA7075

Tungsten inert gas (TIG) welding is the most commonly used joining process for aluminum alloy for AA6061 and AA7075 which are highly demanded in the aerospace engineering and the automobile sector, but there are some defects occur during TIG welding like micro-crack, coarse grain structure, and porosity. To improve these defects, the TIG welded joint is processed using friction stir processing (FSP). This paper presents the effect of friction stir processing on TIG welding with filler ER4043 and ER 5356 for dissimilar aluminum alloy AA6061 and AA7075. The mechanical characterization, finite element formulation and mathematical equations of heat transfer of TIG + FSP welded joints are investigated using ANSYS Fluent software by adjusting process parameters of FSP. The results show that the maximum compressive residual stress 73 MPa was obtained at the fusion zone (FZ) of the TIG weldment with filler ER4043, whereas minimum compressive residual stress 37 MPa was obtained at stir zone (SZ) of the TIG+FSP with filler 5356. The maximum heat flux 5.33 × 106 W/m2 and temperature 515 ℃ have observed at tool rotation 1600 rpm with a feed rate of 63 mm/min. These results give a satisfactory measure of confidence in the fidelity of the simulation     

榴弹隐身涂层粘合强度分析

隐身榴弹在发射过程中,表面涂敷的RAM将承受较大的加速度过载,为了保证发射过程中RAM不脱落,要求RAM具有克服过载的粘着强度。分析了榴弹涂敷隐身材料的强度要求,根据要求设计粘合胶强度、RAM的厚度和密度等参数,并进行实验验证。     

电晕放电辐射场若干特性分析

为了研究电晕放电辐射场若干特性,首先进行了电晕放电时电晕电流的理论分析,研究了电晕电流的波形随电压变化情况。然后在采用针-板电极物理实验模型的基础上进行了电晕放电实验研究,分析了放电针上的充电电压对脉冲电流的影响,并确定了辐射场随传播距离的变化规律以及放电重复率随电压的变化情况。实验结果发现,当针为负极性时先发生放电,但正极性下先发生火花放电;电晕放电辐射场与距离成反比关系;放电重复率随着电压的增大而增大。